Is it possible to create a component without a component controller?

Hi every one,
Is it possible to create a component without a component controller?If yes , how and what is the purpose of this?
Thanks in advance. Points will be rewarded.

Hi Prosun Bondopadhyay ,
Component controller is the base of a wda component. its can be considered as the base class. all the other views can be considered as the sub classes of component controller. so without the base class there is no existence for sub class rt?
like we can use all the methods and attributes of a component controller(main class) across all the view(sub class) and the viceversa is not possible.
hence we cannot create a wda without component controller.
Regards
Sarath

Similar Messages

Is it possible to create Resuable component in Swing

Can Some one tell me Is it possible to create Resuable component in Swing?
I have around 100 applications and i have to create a common Component and I have to use for this to all 100 Applications.
If possible can u send me code.
Thanks
Mohan Kumar

Hi Prosun Bondopadhyay ,
Component controller is the base of a wda component. its can be considered as the base class. all the other views can be considered as the sub classes of component controller. so without the base class there is no existence for sub class rt?
like we can use all the methods and attributes of a component controller(main class) across all the view(sub class) and the viceversa is not possible.
hence we cannot create a wda without component controller.
Regards
Sarath

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

Is it possible to create a WBS without Company code

Hello,
I am a SAP CRM guy and I am creating a WBS in PS system from CRM Campaigns.
My question is whether its possible to create a WBSE without having a Comapny code?
The reason we need this is because we are planning campaigns at a very high level and later we want to procure for these cmapaings at multiple company codes and cost centers through SRM. So we do not want to restrict the WBSE to one comapny code.
Regards,
Vicky

Hi Ammar,
The reason this scenario does not seem to be feasible is we have a one to one relationship between campaigns and WBSEs. Creating multiple WBSEs would translate as creating multiple campaigns, which we want to avoid at the first place as this increases the amount of data entry for planning and planning will become based on the procurement we is not the right way.
However, atleast I am sure now that I cannot have WBSE without company code.
Abdul,
Now I am thinking whether its possible to create a Project instead of WBSE and then procure wrt project?
I need to check the possibility of creating project from a campaign, but from the procument perspective, do you know if its possible to procure wrt project?
Thanks & Regards,
Vicky

Is it possible to create .ncd file without using MAX?

Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
Thank you

Hi,
the NI-CAN driver software does not provide functions/VIs to generate
*.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
look at the example.ncd file that gets installed with NI-CAN
(<ProgramFiles>\National Instruments\NI-CAN\):
<?xml version="1.0" encoding="UTF-8"?>
<nican_config version="0.1">
<saved>8/8/2005,17:58</saved>
<message name="TransmissionFluids">
<id extended="0">82</id>
<dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
<conflicts>0</conflicts>
<bytes>6</bytes>
<interface>1</interface>
<comment></comment>
<channel name="ClutchPressure">
    <conflicts>0</conflicts>
    <bitfield start="0" bits="8" order="0" type="1"/>
    <linear_scaling factor="1.600000e+001"
offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
default="0.000000e+000" unit="kPa"/>
    <comment></comment>
</channel>
</message>
</nican_config>
Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
-B2k

Is it possible to create "places" tags without the maping feature?

Is it possible to create "places" tags without the maping feature? I updated from PSE 10 (where I created my own list of "places,") to PSE 12, where "places" seems to require the mapping feature. I would prefer not to use the map, and stick to my old way.
Thanks for any help!
Tom

Apparently, not only is the mapping feature required, but once the GPS-loaded Place tag is created, it is not listed in alphabetical order with other place tags. It is listed by country, then by state, then by title!! !! VERY irritating!! And what if I want to create a place tag (of which I already have many) which does not have a recognizeable address, like, say, Grandmother's House? VERY irritating.
And if I use the Keyword feature to create Place tags, they will be in an entirely separate list from the other Place tags. VERY irritating!
Who designed this upgrade? I will soon start looking for an alternative, though I have used Photoshop Organizer for years and have thousands of photos in it. My upgrade to PSE 12 has caused me nothing but headaches.

Is it possible to create info record without material number

Hi all,
Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
Thank you for the help.

Hi,
1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
2.Info Update indicator -
Info record update
    Determines whether the prices and conditions of this purchase order ite
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
reward if helpful,
Regards,
Chetan.

Is it possible to create a component that takes two inputs?

Hi Experts,
Is it possible to create a custom JSF component that takes two input values and assigns them to a managed bean?
For example, a component that displays two input boxes?
The tag would look something like this:
<my:component value1="#{bean.value1}" value2="#{bean.value2}" />I've tried, but I can't get the values to update the managed bean.
I'm starting to doubt that it is possible, as their is only 1 setSubmittedValue method :(
Thank you,
Ristretto

Hi Prosun Bondopadhyay ,
Component controller is the base of a wda component. its can be considered as the base class. all the other views can be considered as the sub classes of component controller. so without the base class there is no existence for sub class rt?
like we can use all the methods and attributes of a component controller(main class) across all the view(sub class) and the viceversa is not possible.
hence we cannot create a wda without component controller.
Regards
Sarath

Is it possible to create a PO without account Assignment or condition Info

Is it possible to create a purchase order with out Account Assignment ( not even single account assignement).
Is it possible to create a purchase order with out condition Information ( not even single condition information)

1. Yes, it can possible to create a purchase order with out Account Assignment ( not even single account assignement).
It depends upon the SPRO settings.
2. Condition Information is must for PO.
If helps please award points.
Thanks.

Is it possible to create a variant without selection screen

Hi,
I would like to create a variant for a report(Standard report). It does not have selection screen. Could someone tell me is it possible to creste a varaint for it?
Is it possible to create a variant w/o selection screen? if yes, how?

If some SELECT-OPTIONS are hidden or NO-DISPLAY, you should be able to create a variant for the report.
Rob

Handle button event of popup created from component controller

Hi all,
I have created a method for created popup in the component controller with button kind 'yes-no'.Now i use it in the view.
Till here all is working fine.
Now i want to use the events which triggers on the popup (yes, no).Any idea how to trigger these buttons action.
The problem i am facing here is: When i use <b>subscribe_to_button_event</b> method it does not working.
Any ideas how to use this.
Points will be sured.
Sanket sethi

hi sanket.........
here is a code snippet... check this out.
data: l_cmp_api          type ref to if_wd_component,
        l_window_manager   type ref to if_wd_window_manager,
        l_popup            type ref to if_wd_window,
        l_text             type string_table,
        l_api              type ref to if_wd_view_controller.
l_cmp_api        = wd_comp_controller->wd_get_api( ).
l_window_manager = l_cmp_api->get_window_manager( ).
insert `Data where changed` into table l_text.
insert `Do you want to save?`        into table l_text.
l_popup = l_window_manager->create_popup_to_confirm(
                text            = l_text
                button_kind     = if_wd_window=>co_buttons_yesnocancel
                message_type    = if_wd_window=>co_msg_type_question
                window_title    = 'Test: Popup to confirm'
                window_position = if_wd_window=>co_center ).
l_api = wd_this->wd_get_api( ).
l_popup->subscribe_to_button_event(
               button            = if_wd_window=>co_button_yes
               action_name       = 'YES'
               action_view       = l_api
               is_default_button = abap_true ).
l_popup->subscribe_to_button_event(
               button            = if_wd_window=>co_button_no
               action_name       = 'NO'
               action_view       = l_api
               is_default_button = abap_false ).
l_popup->subscribe_to_button_event(
               button            = if_wd_window=>co_button_cancel
               action_name       = 'CANCEL'
               action_view       = l_api
               is_default_button = abap_false ).
l_popup->open( ).
--regards,
alex b justin

IS IT POSSIBLE TO CREATE A PO WITHOUT PLANT

HELLO EXPERTS,
I have following business scenario,,
for a material X , price for plant A is 20 rupees and for other plant 25 rupees.
I have created one info record for that .
PLANT SPECIFIC INFO RECORD (plant A) 20 rupees
INFO RECORD (WITHOUT ANY PLANT ) 25 rupees
but when i going to make a PO it will ask for plant , and after i giving the plant name it will pick the plant specific value(20 rupees). So I cant able to do the 2nd scenario, i mean ..with 25 rupees.
As I know that it is not possible to make a purchase order without PLANT.
SO IS THERE ANY ALTERNATIVE WAY TO SOLVE THIS PROBLEM.
again in my screen layout setting ( standard purchase order NB / NBF ). IN BASIC item PLANT HAS OPTIONAL ENTRY NOT REQUIRED ENTRY.Than why it is asking that plant is mandatory when i m making a standard PO.
plz hepl me
regards

Hi,
Without entering the Plant you cann't create the PO. Plant is mandatory.
If your Materials is maintained in 2 Plant then the Price in both the plants is different (20 & 25)
So in the same PO you can enter the 2 line items with the same material and enter the 2 plants respectiviely with the net price as 20 & 25 (or will pick from Info record)
If you want same material is valuated in 2 price in single plant you can use the Split valuation method ( Val category & valuation type )
Rgds
Chidanand

Is it possible to create mandatory advertisement without force Run

Hi All
1.We want to create the mandatory advertisement with without force run and want to run it from RAP
2. I already knows that if I will create non mandatory advertisement it will sit in RAP and will not run.
But I want to implement point 1 as I want content to be downloaded in cache quickly and want to run it manually from RAP.

Hi Jason
thanks for the reply ,I got answer from your different post ,we can give longer future date to avoid execution of mandatory application .
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a327e7ce-58aa-40d5-8fdd-35df1bc414f1/sccm-advertisement-precache-download-mandatory-but-not-force-run?forum=configmgrswdist
actually what I wanted , is to download the application in advance in cache and execute later in future date
every time I was selecting as soon as possible so it was forced run, now I made it future date working accordingly because I am running it from RAP now.
Many Thanks Jason

I'm among about 140 people who received the same email. I want to include all of those addresses in a new group. Is it possible to create the group without having to manually enter each of the 140 addresses?

I'm among about 140 people who received the same email. How can I create a new group for these people without manually entering all 140 addresses?

Hi SDGNOM,
According to your description, my understanding is that you want to export list to Excel with all columns in your SharePoint.
For the SharePoint RPC protocol method, SharePoint export to excel will take the list id as well as the view id. So we cannot export list to Excel with all the columns without having to depend on the fields
chosen in the default view.
Reference:http://msdn.microsoft.com/en-us/library/ms478653.aspx
For a workaround, you can achieve your demand via PowerShell. Here is a template you can refer to:
Param(
[Parameter(Mandatory=$True)]
[string]$webUrl,
[Parameter(Mandatory=$True)]
[string]$outPath
$web = Get-SPWeb $webUrl
write-host ("Path: " + $outPath)
foreach($list in $web.Lists)
$exportlist = $null
$exportlist = @()
$list.Items | foreach {
$hash = $null
$hash = @{}
foreach($fld in $_.Fields ){
Try {
$hash.add($fld.Title, $_[$fld.Title])
Catch [System.Management.Automation.MethodInvocationException]
# Eating an error caused by duplicate column names.
Finally
#"End"
write-host ("Exported: " + $_.Title)
$obj = New-Object PSObject -Property $hash #@{
$exportlist += $obj
$expath = $outPath + '\' + $list.Title + '.csv'
$exportlist | Export-Csv -path $expath #$oPath
Reference:
http://porchcode.blogspot.com/2013/04/exporting-sharepoint-list-items-to-csv.html
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Is it possible to create an account without credit card?

i was trying but i did't find the button "No card".

You can if you follow the instructions on this page when creating an account (the instructions don't work with existing accounts) : http://support.apple.com/kb/HT2534
e.g. log out of your existing account, find a free app in the store, click on its free 'price' to 'buy' it, click on 'create Apple id' on the popup. I tried it a few days ago and got 'none' on the payments screen and was able to verify the account and download a free app with it

Is it possible to create a component without a component controller?

Similar Messages

Maybe you are looking for