Is it possible to create a hot folder for batch processing?

I know that it's possible to make a droplet for preflight, but is it possible to create a droplet or a hot folder for another batch processes (mine crops the pages)? Or at least make a keyboard shortcut? It's so unproductive to go Advanced>Document Processing>Batch Processing>Run>Close (Adobe spoiled us with custom shortcuts in other programs)...

HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for.

Similar Messages

Hi, is it possible to create different application folder for a different drive?

Hi,
My OSX is 10.9.5, processor speed is 1.8GHz i5, 4 GB 1600MHz DDR3, MacBook Air Mid 2012.
I have partitioned my drive in two.
Itunes was previously saved on MAC HD, but due to lack of space i would like to shift it to MAC HD 2. So, i removed Itunes from MAC HD saved all my media on a hard drive. I downloaded the .dmg file for Itunes and would like to save it on MAC HAD 2.
I have noticed that you need drag and drop Itunes in the APPLICATIONS folder, which by default saves it on MAC HD.
THE QUESTION
CAN I MAKE AN APPLICATION FOLDER FOR MAC HD 2, SO I CAN INSTALL ITUNES ON IT OR IS THERE SOME OTHER WAY?? (IN SHORT I NEED 2 APPLICATION FOLDERS)

My OSX is 10.9.5, processor speed is 1.8GHz i5, 4 GB 1600MHz DDR3, MacBook Air Mid 2012. I have partitioned my drive in two.
That doesn't give you any more disk space. it just limits the storage on each partition to 1/2 or less of what was on the unpartitioned drive. What you need is a portable external HD like this one to put your iTunes library (and other seldom used files) on and run from there.

Create a smart folder for images imported "TODAY"

Is it possible to create a smart folder for images imported today? The only close option I have been able to find is by selecting the "import session" option, but that forces me to select from a series of sessions that have already been imported. I'd like to be able to have a single folder, day after day of what I imported today almost like the iPhoto "last roll" folder. Possible?

There is a Filter Rule "Import Session" but as implemented (as you discovered) it isn't easy to use.
What I do is:
. add "Import Session" to the "List -- Expanded View" Metadata Overlay
. click "Photos"
. change to List
. change to Expanded Overlay if needed
. click the column header "Import Session" (note that this adds "Import Session" to the sort drop-down)
. change back to Grid view as needed
I use this to confirm imports, and to find any that I mis-placed.
HTH.
Message was edited by: Kirby Krieger

Is it possible to create a hot spot with Apple Airport Express 2nd Generation Dual Band Wireless Router, usefull in a hotel with ethernet wall sucket.

is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?

HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for.

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

FM import into RH project creates a separate folder for every FM chapter

I am importing a FM book into RH 9 to create a new help project. RH creates a separate folder for every FM chapter! The folder contains the html and CSS. This is messy and useless since all html will point to a single help CSS for the project. It will be tedious to move all the html topics to one folder plus I will lose the FM link for future updates.
Did I miss a step in the import that controls how the project is created in RH?

Yes, this is deliberate - in fact most people want to sub-divide their .fm files into even finer topics - that's what the pagination setting in the Conversion Settings screen is for. Why do you want them all to be mashed together anyway?
I've only heard of one other poster wanting to stuff all their FM content into one folder - try searching the forums. I seem to remember there were a bunch of suggestions to things to do from either the FM end of things or the RH side.
The reason why Adobe did it this way was to give you individual control over the CSS to be applied to individual topics (even if most of us just apply a common one across the board in the SSL recipe when we create our help).

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

How do I create a new Folder for each test report based on Serial number?

I want to be able to create a new folder for each test report based on serial number. Each time a UUT is tested, I want the report to go to the appropriate folder. What is the best way to do this?
Thanks

Hello Tman,
This is a slightly tricky question. The reason being, the report options like the report path etc, are set before you see the serial number prompt when you run your UUT. There might be other ways of getting around this, but a quick solution would be modifying the process model.
I modified the PreUUT callback to set the report options. I passed the reportOptions as a parameter to this sequence. In the PreUUT sequence, I set the following fields:
Parameters.ReportOptions.GeneratePath=False
Parameters.ReportOptions.ReportFilePath= "c:\\"+ Locals.SerialNumber +"\\report.xml"
I hope this would give you an idea.
SijinK

Is it possible to create an inbound delivery for STO in a 2 step process ?

Hi Experts,
Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
Let me know in case if that is not possible.
Thanks,
Nitin

Hi Tao,
I did that also, but it did not work.
Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
Anyways, thanks for your help.
Regards,
Nitin

Is it possible to create a customs declaration for the document which is cleraed from customs

Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivas

hi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

How do I create a spam folder for my sms messages? This is a common feature found in Samsung smartphones and I find it very helpful, thanks!

How do I create a spam folder for my sms messages? This is a common feature found in Samsung smartphones and I find it very helpful, thanks!

There is no app that will do this.
Tell Apple: http://www.apple.com/feedback/iphone.html
I doubt I've had over 5 spam texts since I've had a cell phone and I reported all of them. How many are you getting?

Creating an Action and then Batch Process

Need some help creating an action and then batch processing a file using that action. I was able to do it in previous versions of PS (wish I had kept the action!). For some reason its not working. Keeps creating the same file over and over again. Here goes:
Action:
Open up a PDF (separate PDFs of a PowerPoint Pres, may contain 80-100 pages); convert to grayscale; reduce to 43.2%; save as a TIF and close file.
Batch:
Use this action on all files.
When I create the action it just recognizes the first file that I use as a sample and saves over the result over and over again.
Thanks in advance.
Tom

You probably recorded a save as command in it and changed the name of the file. This change is also recorded and after playing the action it just overwrites the same filename over and over again.
Always leave the filename untouched when recording actions.

Hot Folder for FTP Script

I'm trying to make a folder on my Mac that is a "Hot Folder." I want this folder to have an action/script that as soon as it sees a new file added it will open Fetch and upload via mirror to an FTP folder.
I was able to make the Fetch portion of the script without issue, but making the folder "Hot" is a bit more difficult for me. I tried to use some script from the sample script "add - new item alert" but have been unsuccessful. I'm hoping some of you Applescript pros can review this and tell me how to correct. Or perhaps you know of a better way to make this work with automator.
SCRIPT:
on adding folder items to this_folder after receiving added_items
try
tell application "Finder"
--get the name of the folder
set the folder_name to the name of this_folder
end tell
-- find out how many new items have been placed in the folder
set the item_count to the number of items in the added_items
--create the alert string
if the item_count is greater than 1 then
tell application "Fetch"
activate
make new transfer window at beginning with properties {hostname:"ftp.hostname.here", username:"myusername", password:"mypassword", initial folder:"/pub/pao/images/"}
mirror alias "Macintosh HD:Users:Bill:Desktop:test:" to url "ftp://myusername:@ftp.hostname.here/pub/pao/images/" format Automatic without delete strays
end tell
end if
end try
end adding folder items to
Thank you all!

Well, then. I thought wrongly, I haven't used those in a very long time and thought they were saved.

E4200 v1- problem creating a shared folder for the FTP server.

Hi,
I'm trying to share an external USB harddrive (4TB- HFS+) that is attached to my e4200 router. I'm trying to set up the FTP server, but when I try to create a shared folder, I get kicked out of the browser based interface for the router just as I'm trying to save the new shared drive. I have tried many different things to get it to work: different computers (PC and Mac) different browsers, reflashing the firmware (which is version 1.0.06, build 3), I tried all of this with an NTFS formatted drive as well- everytime I try to set up the shared folder- right as I hit the save button it kicks me out saying: Session Failure.
I can see my drive on the local network, and I know the FTP server is working, because I can log into it from the outside- but I don't see anything shared, when I do.
I have successfully gotten the media server to work using the same drive- but I can't create shared folder there either... It seems to have shared the entire disk automatically when I first connected the drive to the router.
Anybody have anything else for me to try?
Help!

Same problem. Has anyone found a solution? I contacted tech support and got nonsense responses. I was of course asked to Factory Reset even though I told them I had done it before I called - classic brush off. Basicly here is the problem.
1. I cannot create a share on a USB connected HDD - this worked on the older Firmware. Now every time I try to set up the shared folder- right as I hit the save button it kicks me out saying: Session Failure. I am not the only person with the problem. Crazy thing is I had a share created and it worked after the upgrade. I wanted to add an additional share and now it wont share anything. HDD plugged into my PC works great. I was asked to try a different PC - even though I told them I tried from IE, Chrome, Firefox on a Windows 7, Vista, windows XP, IPad, Kindle and Samsung phone.
2. While troubleshooting with the agent I discovered that although I have remote access disabled in the Administration>Management page but I can still access the router remotely. This is a huge security issue.
3. Linksys is no longer a Cisco Company - if the code is this bad Belkin should take the Cisco logo out of the GUI. Don’t blame Cisco for your poor SW.
I am ready to buy a new router and avoid Linksys and Belkin all together in light of these issues.
Additionally, I would simply downgrade but the older Firmware is not available. When I asked for it I was told I could not get it.

Is it possible to create a hot folder for batch processing?

Similar Messages

Maybe you are looking for