Is it possible to create a "leave colour" effect with imovie? If so how?

I've been messing around with different exposures, saturations etc. all night and I still haven't been able to figure out how to show a black & white clip with one colour (in this case red) for contrast. Any techies out there who can help me please?

... "leave colour" effect ...
.. which is widely asked & discribed at any FinalCut/Epress board as 'Schindler's List Effect' (= the red dressed girl in the b/w scenery...)..
no, this is a highly elaborated post-production effect to 'pick' a color, using that as a 'mask' and make any other surrounding b/w...

Similar Messages

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

Is it possible to create box plots in illustrator? If yes, then how?

Is it possible to create box plots in illustrator? If yes, then how?

You draw them manually. There is no built-in functionality. AI simply sucks for any kind of diagrams.
Mylenium

Is it possible to create a 1 D array with the "build array VI"? when receiving random number

Hello all,
Is it possible to create a 1 D array with the "build array VI" when receiving random number?
I am receiving random data and the build array VI always create a 2D array which might cause some problem if you want to compute certain type of operation after.
Any example will be welcomed.
Thank you,
Israel

Hello Lynn and Yamaeda
First I want to Thank you Lynn for your linguistic contribution indeed "Build Array" is a primitive and not VI, thank you for the education. In reality what I am doing is simple.
I have two arrays of complex elements Array1 and Array2.
Array1 conains the complex elements ""(a0+ib0) ; (a1+ib1) ;...(an+ibn) ;
Array2 conains the complex elements ""(c0+id0) ; (c1+id1) ;...(cn+idn)
What I want to do is the multiplication of the first array by the conjugate of the second array element.
Array1*(Conjugate Array 2)" for the first element the results is "(a0.C0-b0.d0) + i(b0c0-a0d0)" and the etc...
and then taking the square root ([(a0.C0-b0.d0) power of 2]) + [(b0c0-a0d0) power of 2])
I was wondering if there were some dedicate primitive that could solve the computation above which is the cross correlation in Frequency domain.
Thank you very much.
Israel

Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?

Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aa

I think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

How do you create a mirror image effect on imovie 2014?

All the tutorials online show how to create a mirror image effect on imovie 2011, however there are none showing how to do it on the current version.

You can't do this in iPhoto.
In order of price here are some suggestions:
Preview, already on your Mac.
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

Is it possible to create a pop up screen with alv tree within it?

I was wondering whether it is possible to create a pop up screen where an ALV tree is within the pop up screen and the user may select a record from it..
is there a function module for such function?

you may use class cl_gui_alv_tree and display it in a popup screen. Look at RSDEMO_DIALOGBOX_CONTROL program (popup + cl_gui_picture control), and you combine it with BCALV_TREE_04 (cl_gui_alv_tree) to replace cl_gui_picture. You may access all demos from menu SE38, Environment, Examples (and finally Controls Examples in your case)

CP5.5 - Is it possible to create a quiz summary screen with all questions reviewed on one screen?

Hello Forum members,
I was wondering if it is possible, rather than having a quiz review where you review the quiz questions one screen at a time, if it is possible to create a quiz summary screen, which will provide a summary of which questions were answered incorrectly/correctly (without actually giving the user the correct answers)?
An example of what I'd like to achieve is below:
Is this possible in CP5.5? Perhaps with Advanced Actions/variables?
many thanks
Loraine

Hello Loraine,
This is possible using Advanced Actions and variables. After every question, On Success you can set a variable to 1 and create a custom screen where you can show/hide the tick mark graphic based on the variable value set.
For Ex:
- For question 1, on success, set x=1
- On the results screen, correct tick mark graphic is hidden. If x=1, then show the correct tick mark.
Like this you can do for all the questions. Will wait for others also to comment for any quicker solution.
Thanks,
Vish

Is it possible to create multi-step parallax effect in Muse?

I wonder if it is possible to create parrallax cheme like here http://www.rbcplus.ru/news/551a11037a8aa955a2b7f0cb
Namely:
1) the object (in this case left sidebar http://c2n.me/3gdkXLL.png ) is scrolling along with all page till some point 1
2) the object stops and is fixed till some other point 2
3) after the point 2 the object is scrolling along the page again
It is very useful if I have objects which have to be fixed and full width footer.
Thanks.

I assume that you're referring to the twisty 3D ribbons.
Zaxwerks 3D Serpentine is good for that:
http://zaxwerks.com/3dserpentine/index.shtml

NEWBIE Question: Is it possible to create a "Branding Iron" effect?

Hello!
I would like to make an effect of a branding iron burning our logo onto a surface. Not knowing too much about Motion (I'm more of an FCP guy) I'd like to see if I can do this. Any help is appreciated.
Thanks!
Andy

It's complicated but, yes, it's possible.
Creating the smoke/steam and adding some sizzle/grunge/decay to the edges of the logo are not difficult in Motion. They just take lots of experimentation (or lots of help from Sheffield).
The tough part is creating the branding iron itself since Motion has no 3D capabilities. Adding a red hot glow to the iron object should be easy if you understand creative masking.
Try to deconstruct the effect you're looking for, consider the degree of realism or stylization you're willing to accept and then try to figure out how many different layers or pieces you'll need to pull it off.
It's not something I'd attempt in Motion but, umm, to be frank, I'd rather eat barbed wire than try ANYTHING in Motion that I can do in After Effects.
bogiesan

Is it Possible to create a Report Name starting with M.

HI ,
Just Now I have created a report naming with MYreport. I have expected that system will ask the Access Key since starting letter is M . But System allowed me to create the Report MYREPORT.
As per My Knowledge, Only Y and Z letters for Report. But now how system allowed me to create a report starting With M without access key.
With Regards,
Neptune.M

Hi,
You can name a program with 'MZ' or 'MY'. Infact all the includes of custom module program will be having names starting with 'MZ' or 'MY'. Try creating a program with other than these combination, the system will surely check.
Addendum:
For example if you create a module pool program with name
SAPMZTEST, then the include names will be
MZTEST_TOP, MZTEST_O01, MZTEST_I01, MZTEST_F01 and so on..
Similarly, for Z function group sap creates dynamically creates the following programs:
SAPLZTEST - Main program
LZTESTTOP
LZTESTO01
LZTESTI01
LZTESTUXX where X containing includes LZTESTU01,LZTESTU02 stands for 01, 02 and corresponds to function module under the function group.
Thanks and regards,
S. Chandramouli.
Edited by: Chandramouli Subburathinam on May 5, 2008 2:35 PM
Edited by: Chandramouli Subburathinam on May 5, 2008 2:42 PM

Is it possible to create a Photo Gallery DVD with downloadable content?

I am looking for a way to create a photo gallery, distribute it via DVD, and have the end user be able to download the photos from within the photo gallery. This would function exactly like the iPhoto web galleries, but would be distributed on DVD rather than posted to the web. Is this possible? I am looking for a way for a user to download the photos, in low res and high res, from within the DVD player.

My first suggestion is to use Apple's Pro apps (ie, DVDSP) if you plan to use this DVD commercially. You'll get far better results and you will also be able to meet nearly all of the above objectives.
If on the other hand you don't have the time to learn apple's pro apps which does have a large learning curve compared to the i-apps, and you are currently working with a shoestring budget, then you can meet at least some of these objectives within iDvd by adding your content to the Dvd rom section of the Dvd. The app that one uses to play the slideshow from this data section of the Dvd depends largely on the available apps on the host computer system having access to this data in terms of what software is available to play its content. Hope this makes sense but if not, just come on back. Good luck.
Btw ... I'll check back with you later tonight since I have a fair amount of editing to do this AM.

Is it possible to create a gradient mesh object with 2 spot colors which separates & prints as a 2 color print job?

I have a gradient mesh object which uses 2 spot color values (including some tints of those 2 colours) which I'd like to print as a 2 color print job. Is this possible? If not, any suggestions as to how I should proceed? The print job MUST be 2 color. Ideally I don't want to use raster objects but if I have to would appreciate any advice on the easiest way to transform my 2 color mesh object into a matching duotone raster object.

I'd really say it's that PPD with the new n-space features of CS3 and CS4. If I use your PPD I get the same shoddy results you do with the postscript file. In fact, Acrobat Distiller errors with a log...
<PDFX ISO="15930-1:2001" COMPLIANT="false">
PDF/X Compliance Report
1. Color
   The following pages are separated plates:
      Page 1, Occurrences: 1
      Page 2, Occurrences: 1
      Page 3, Occurrences: 1
      Page 4, Occurrences: 1
   Violation. The use of %%PlateColor is not permitted and was found in the document. Occurrences: 7
   Violations: The total found in this section was 11.
2. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 11.
   This document does not pass PDF/X-1a:2001 compliance checks.
</PDFX>
%%[ Warning: Did not pass PDF/X compliance tests. No PDF file produced. ] %%
If I use your PPD, print your AI file to a postscript file, then simply open the resulting Postscript file with AICS4, I see the same bad results that I showed in the movie. I think the PPD can't handle the new method of breaking out spots in gradients. Just to test this theory... try a different PPD and see if that works, at least to show the seps properly.

Is it possible to create a pop-up menu with sub-headings

I am trying to setup a pop-up menu in Number that would give me the ability to first create subheadings, that I can then enter my selection list in.
Example:
Subheading 1
     eg 1
     eg 2
     eg 3
Subheading 2
     eg 1
     eg 2
     eg 3
Subheading 3
     eg 1
     eg 2
     eg 3
I did try to search for a solution to this, but nothing came up that I recognized quickly. So, I'm hopeful that someone out there in the Apple community has a quick work-around for acomplishing this.
Thanks,

Strictly speaking this i not possible. You could precede each entry that is indented with a space to make the menu appead to have sub entries.

----- Is it possible to create this mask shape effect in FCP X?

I've been playing around with some masks in FCP X, but I cannot figure out how to create this effect..is it possible?
I am interested in creating a mask shape where I can use it to identify something on the screen inside the shape with the surrounding area darker.
In FCP 6/7, I used to just add a slug on top of the clip, add a mask shape, tweak it, invert it and lower the opacity.
Any thoughts?
Thank you.

AppleUsur wrote:
… I am interested in creating a mask shape where I can use it to identify something on the screen inside the shape with the surrounding area darker.
in FCPX no masks nor additional tracks needed:
select the clip
in the Info board, select the Color Correction
there's a built-in Mask tool - select that
switch on the Color Board, here comes the trick: …
you are allowed to select WHERE the correction is applied: inside or outside the mask
(in my German interface Innen/Außen)
drag down the general exposure
there are handles to define size, shape, position
you can drag the outer circle (no handles) to define blurr gradient
you can even animate that highlight by key-framing it ....
with the same tool, you can e.g. apply super-fast some simple 'grading' such a 'CSI Miami-style Blue Sky':

Is it possible to create a "leave colour" effect with imovie? If so how?

Similar Messages

Maybe you are looking for