Is it possible to create a link on the content of a text annotation??
Is it possible to create a link on the content of a annotation??? Like the content of an annotation is some notes as well as a link...
content -
this is my first annotation(notes)
http://www.google.co.in/(link)
is it possible to create a link for the url given in the content of an annotation??? On click on the url...it should get opened...
please reply its really urgent....
How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss.
Similar Messages
-
Is it possible to create a link to the bibliographies ?
is it possible to create a link to the bibliographies ?
How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss. -
Is it possible to create a list of the contents of a portfolio
I have the need to create a number of portfolios with different files based on the need of the individual in the organization and subject to document control procedures. As part of the document control procedure, I have to identify what versions of what documents are contained in the portfolio issued to each individual.
Is there an automated way to create or print a table of contents or list of contents of a portfolio?
Thanks in advance.Not easily... This would require developing a custom plugin, which is quite complicated. There are simpler ways to achieve something like this, though. For example, you can create a set of customized stamps and use those. A script can also be used to add or edit existing comments, but it depends on what type of comments you're using and how you want to edit them, exactly.
-
Can I create multiple links to the same file without duplicating file?
does anyone know if it is possible to create multiple links to the same file using iWeb without the program automatically making multiple copies of that file in the published output? It seems that one file is created for each link.
Thanks!Hi Franz,
have a look at the second method on this page
http://alyeska.altervista.org/en/iWeb_Downloads.html
see if you understand how it works (if you don't, please ask me)
Regards,
Cédric -
Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?
Yes, but it WON'T play through the browser. It'll require any visitor who clicks it to have iTunes installed, and it'll open iTunes as soon as they do.
-
Photoshop Elements 13 - Is it possible to create a link in an image?
Photoshop Elements 13 - Is it possible to create a link in an image?
No, you would need to use your web design program to do that.
-
Is it possible to create view link on programatic VOs
I tried creating a view link between 2 programatic VOs but did not get a clean way to get the where clause.
It appears that the where clause has to be dependent on the EOs which does not exist in this case.
On creating the view link,i need the following where clause:
VO1.col1 = VO2.col1 ( i.e. :Bind_col1 = VO2.col2)
Is this possible ? The query getting built here is showing up as null bind variable i.e. :Bind_col1 is null
Please suggest how to get over this issue.How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss. -
ICWC: Is it possible to create a link in a message in the error line
Hi,
after saving a service order in the IC WebClient the success message (including the object id) is shown in the persistent header area of the ICWC - in the error single line.
Is there a possibility to have a link in this area? I want to create a link onto the object id to directly get into this order again.
Thanks for your help.
Regards,
BenHi,
thanks for your response. Just for the understanding, in my case there are no error messages displayed in the error line. The only visible message is the success note "service ticket XYZ is saved successfully". After saving the ticket correctly we have to navigate to a different view. Changing this is not possible.
So the new client requirement is to create a link at the "XYZ" (object id) in this error (success) message. But I think there is no possiblity to get a navigational link or a usual html-link at that place.
Maybe you got some more ideas?
Thanks and best regards,
Ben -
Is it possible to create a 'layer' over the top of a PDF in Captivate?
I am trying to integrate a 3dpdf within captivate 8 for a software training program, for this it is important to retain functionality to the pdf menu, Captivate handles this well : ) HOWEVER on importing the pdf it becomes clear that the pdf 'trumps' other objects such as clickable areas or text, which therefore don't seem to appear when published. I also wish to provide 'blocked' areas by putting transparent objects over the top of the pdf so as to control the learning process, which also doesn't seem possible on initial inspection.
Does the PDF exist outside the timeline?
Does anyone know how to layer objects over a pdf object that will remain there when published?
Many thanks!
Sam the GiraffeHow/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss. -
Creating a Link on the Column Heading
Good afternoon,
I know with reports, you can create a link for each cell in the report attributes section. My question is it there's any way to create a link for the column header without hard coding it into the query that generating the results.
Thanks in advance,
IvanIvan,
If you are using the classical reports, you have the option of creating column header using pl-sql block which will be dynamic. Thanks
Regards,
Manish -
Is it possible to create a BBS in the web app?
Is it possible to create a BBS in the web app?
BBS you mean Bulletin board?
You have a forums module in BC. -
Is it possible to create graph with in the table / Pivote table.
Is it possible to create graph with in the table / Pivote table.
Emp# Emp Name % Bonus Pay Amt
111 AAA $28276
222 BBB $78878
In the place of Bonus I have to display Bar (Chart) instead of number.
Is it possible in OBIEE? I know we can display chart and table next by next but my user want display just like above.
Please help me on this issue
Thank you very much for your timehi,
it is better for 2 different questions,make 2 differents threads...
You used the 2ond solution(google???),put in the dashboard...html enabled...and check your pdf again.
Moreover,printing pdf with answer is discouraged...always prefer Xml Publisher.
Last,there are 2 fst files which configure the *.pdf files , check them,
http://obiee101.blogspot.com/2008/09/obiee-pdf-controls-fst-files.html
hope i helped....
http://greekoraclebi.blogspot.com/
/////////////////////////////////////// -
How To: Create a link to gatewayed content (e.g. in email)
I apologize if this is too basic of a question but I can't find any results after looking for several hours.
I would like to generate a URL in an email that points to the portal and a specific portlet in the portal. The portlet has limited access rights so the URL should cause the portal to go through the login page and then redirect to the portlet. Can anyone point me to the documentation that describes this or give me an example?
Thanks in advance!
MikeUsing the PTARGS might also solve another difficulty I've encountered passing (dynamic) querystring parms to portlets through the gateway. Your example seems to work great for portlets, but now trying to access a Community page containing a portlet to retain branding elements.
For portal pages, should the ObjectID be the pageID (i.e PageID=0 for the default page) or is the ObjectID for a community page some other value (where in PlumDB is this stored) ? I changed the ClassIDView to 514 which should indicate a Community Page but it's still not loading my page. Adding to my confusion, the PTCOMMPAGES table stores the PageID as a negative value.
Here's my example:
http://portalserver/portal/server.pt/gateway/PTARGS_0_0_0_201_0_514/http%3B/portletserver/ApplicationName/default.aspx?querystring=value
Any thoughts?
re: How To: Create a link to gatewayed content (e.g. in email) Posted by Mike Beniston 5/5/05 9:45:40 AM It turned out that I was pretty close.
If anyone else is interested, here is one way that works.
The PTARGS are _0_userid(leave at 0)_objectid(of portlet)_communityID(if any)_0_ClassIDView(43 = view for portlet)
"http://portalserver/portal/server.pt/gateway/PTARGS_0_0_348_208_0_43/http://portletserver/ApplicationName/pagename?querystring arguments. -
Help Please - having difficulties creating af link from the text to an attached file i acrobat
I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1. Open a PDF that contains a PDF file attachment – done
2. Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3. Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4. In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5. Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290 -
Is it possible to create in R/3 the invoices with status u0091parkedu0092?
Hi ppl.
We are working in EBP with extended classic scenario.
We want to create invoices in EBP, but we want to create all invoice documents via EDI with status parked in R/3.
We read note 501524 (EDI: Generally parking incoming invoices). The note describes all that we want to do, but the problem is that the Function exit EXIT_SAPLMRMH_014 does not work for BBPIV message type and the IDOC_INPUT_BBP_IV function module.
Is it possible to create in R/3 the invoices with status parked for all incoming invoices created in EBP?
Thanks and regards.Raul,
Did you find a solution for this.
We want to do the same here.
thanks
Sanjay
Maybe you are looking for
-
Not able eto publish theme - resource file does not exist
Hi Guys! I try to publish a service to standalone ITS.. When I publish service, it is ok, but when I try to publish Theme 99, I get an error: Ressource file ws01000109 99 does not exist How can I get this resource file? What to do to be able to publ
-
How can I change the place of a photo in iPhoto?
How can I change the place label of a photo in iPhoto?
-
Japanese Kanji is not printing in SMARTFORM eventhough it is showing in PP
Hi All, I have a very peculier problem with smart form. When we are trying to print Quotation and Sales Order seperately in the SAME printer Kanji data(Material description VBAP-ARKTX) is not getting printed for Sales Order but it is printing for Qu
-
How can I simplify the code in this situation?
I want to create some interaction about ABCDEFGHIJKLM objects. If I l click A and B, the screen will show F. If I click A and C, it will show G. If I click A and D. it will show F..etc. When I mouseove A , it will show only L. If I mouseover B, it
-
Early 2008 MacBook Pro has no chime/keyboard/USB/video
Since I can no longer view the relevant Apple TS for the famous NVIDIA GPU problem, I'm not sure what the cause of the problem is with my early 2008 MacBook Pro running Mavericks. I was using it last night to watch a recorded news show while getting