Is it possible to create a program for embedded system

Is it possible to create a program for embedded system?

Yes. Many solutions.
1 = http://jcx.systronix.com/
2 = http://www.harbaum.org/till/nanovm/index.shtml (see links to Asuro)
And many more but I'm too lazy too look them for you ...
Dan

Similar Messages

Is it possible to create Intrastat declaration for service only posted inFI

Hi
Is it possible to create Intrastat reporting for services that is only posted in FI(without PO) for Italy. If you have any idea please let me know .
Thanks
Rao

Is it possible to create Intrastat reporting for services that is only posted in FI(without PO) for Italy. If you have any idea please let me know .
Thanks
Rao

LSMW :Is it possible to create F4 Help for File path selection

Hi All .,
Please let me know is it possible to create F4 help for file path creation in LSMW .
thanks
Sreenivas

Hi,
I don't get it.
In the step " Specify files" you will have the option to pick your flat file which is on the desktop by pressing F4 .
What is that you exactly want??
Warm regards,
Hari Kiran

Is it possible to creat Shoppping cart for Blocked vendor in R/3

Hello all,
is it possible to create shopping cart for blocked vendor in R/3. we are using extended classic scenario with SRM 5.0. when i am trying to do this vendor is not visible in vendor list. Am i missing somthing???
if it is not possible in standard set up...what exactly i need to do.
my requirement is that i should create shopping cart and then PO for posting block vendor in R/3 ( i know that we can do it in R/3)
how to achieve this in SRM 5.0 please guide.
Thanks
Rupesh Mundhada

There are possibly three types of blocks for a vendor in R3
1. All company code are blocked for vendor
2. Selected company code is blocked for vendor
3. Vendor if blocked for the purchasing organization
But SRM allows only Central Locking and Purchasing Organizations level locking to be replicated from R3 - MM. So If the vendor is only blocked for a selected company code it will be still possible to create the shopping cart successfully, followed by purchase order; and PO will be issued to Vendor also; but it will not be replicated until and unless the block at the selected company code level is removed.
This is not wrong; though you will be able to change them as per your business need. The reason is Selected Company Code level block is only used by finance people to stop payment to vendors because of some reasons like exceeding the limit or anything else.
Please reward points if you find it useful.

Is it possible to create a BOM for ROH material for Subcontracting

Dear Guru's
As per my knowledge BOM is needed only for HALB & FERT material even if for subcontracting purpose. So is it possible to create a BOM for ROH material for Subcontracting?. Pls help me to get a soln ?
Regards
Ragesh

Ragesh,
When you are subcontracting the material, the Std SAP says that the material type should be HALB and not ROH.
But if client requires for any reason that the material should be ROH only, there is no problem in chaning the settings.
Sumeet

Is it possible to create inspection plan for "Inprocess Inspection"

Hi,
Is it possible to create inspection plans for "Inprocess Inspection".
If yes , what would be the "task List Usage".Is it "1"?
If no ,then how to map this requirment?
Regards
Vemula

Hi
Vemula
Generally as Per SAP std Routing is used for inspection of 03 type of inspection.
but you can also customize the Inspection task list Usage for Inprocess Inspection.
This is possible through
QCC0>Quality Inspection>Insp lot creation>Assign Insp type to origine>
here informt of 03 inspection type you can assign
Task list type:Q
Usage:either 1(Production) or 3(Universal)
save
Regards
Poonam

Is it possible to create different invoices for a single contract?

Hi All,
is it possible to create different invoices for a single contract?
My customer is asking an invoice per service line.
Thank you for getting back to me on this.
Kind regards
KK

Can somebody please advice?

Creating RFC Destination For UNICODE system From NON-UNICODE system

hi
how can i create RFC Destination For UNICODE system( XI ) From NON-UNICODE (R/3) system.
thanks and regards
Mithlesh Kumar Jha

Hi,
Check these blogs , Hope u would be getting some idea
<b>/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/sap.user72/blog/2004/06/19/how-i-started-with-sap-web-development</b>
Regards,
Sridhar Reddy

ORA-31637: cannot create job SYS_IMPORT_SCHEMA_01 for user SYSTEM in impdp

Hi All,
During impdp i am getting this below error:
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_IMPORT_SCHEMA_01 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 600
ORA-39080: failed to create queues "KUPC$C_1_20090507123340" and "KUPC$S_1_20090507123340" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1606
ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
Also increase shared memory hence creating the same problem.
Can anyone sujjest me what would be the cause?
Thanks in advance...

Increase parameter streams_pool.
Set it for example to 100MB
Then try again.

JAVA for embedded systems: just a myth ?

Hi,
I'm relatively new to JAVA (a year or so), and so far I'm fascinated. I've only developed for PC using J2SE, although I'heard a lot of hipe about J2ME, which I guess is the JAVA for embedded systems (correct me if I'm wrong here).
I worked a lot with microcontrollers, and I think it would be really nice to program them using JAVA. I googled serched for JAVA enabled embedded systems, but I couldn't find anything.
Anyway, this morning I got to this site and find a very interesting article, which I'd like to share with you and hear your opinions about the 5th myth.
The link is: http://www.chipcenter.com/knowledge_centers/embedded/todays_feature/showArticle.jhtml?articleID=10300909
Cheers!!

>... very interesting article, which I'd like to share with
you and hear your opinions about the 5th myth.
Very interesting. I'd always wondered what happened to the Java chips...
Here's a thought, and an associated question, if any of you reading this happen to be up on modern processor architecture...
What about microcode? Back in school (decades ago) I learned a bit about microcode, which was like very simple, low-level instructions that a processor would "execute" to execute each assembly/machine language instruction. The idea was that if you needed to tweak the instruction set of a processor, you could rewrite its microcode. Seems like this would lend itself nicely to implementing a JVM in "hardware"... The question is, do they even use microcode anymore? With the pursuit of speed and optimization, I wonder if they didn't abandon it and go with highly specialized/optimized circuits instead...
Back to the original question -- it would be somewhat ironic if Java weren't available for embedding systems. The original target system was set-top boxes, etc. I've tried a few JVMs on my Palm -- they're getting there!

Crypto libraries for embedded systems

Hi, I need some crypto libraries for my Xlet running on a MHP receiver. I need that these libraries can use the public key extracted from a certificate and encrypt a digest using that public key. I can't use javax.crypto because it doesn't work on a limited MHP 1.0.2 receiver. I need something studied for it. Thank you!!!
Edited by: fabio80s on Oct 23, 2009 3:24 AM

>... very interesting article, which I'd like to share with
you and hear your opinions about the 5th myth.
Very interesting. I'd always wondered what happened to the Java chips...
Here's a thought, and an associated question, if any of you reading this happen to be up on modern processor architecture...
What about microcode? Back in school (decades ago) I learned a bit about microcode, which was like very simple, low-level instructions that a processor would "execute" to execute each assembly/machine language instruction. The idea was that if you needed to tweak the instruction set of a processor, you could rewrite its microcode. Seems like this would lend itself nicely to implementing a JVM in "hardware"... The question is, do they even use microcode anymore? With the pursuit of speed and optimization, I wonder if they didn't abandon it and go with highly specialized/optimized circuits instead...
Back to the original question -- it would be somewhat ironic if Java weren't available for embedding systems. The original target system was set-top boxes, etc. I've tried a few JVMs on my Palm -- they're getting there!

Bonjour for embedded system

Hi,
I have followed the steps provided in the install file to intilize the bonjour for embedded system . first I generated the shared ib for bonjour source code for my embedded system and then I initilized it by calling mDNS_Init api.
Since I just need to browse at my client , I called the browsing fucntion as per dns_sd.h , but I got the below error .
mDNS_StartBrowse: mDNSPlatformRawTime went backwards by 1669225997 ticks; setting correction factor to 1669225997
11-17 00:28:08.481: D/bonjour(1280): mDNS_StartBrowse: mDNS_Unlock: ERROR! m->timenow aready zero
11-17 00:28:08.481: D/bonjour(1280): DNSServiceBrowse("_appl._tcp.", "local.") failed: mDNS_StartBrowse (-65546)
11-17 00:28:08.490: I/System.out(1280): DNSService call failed -65546
11-17 00:32:24.720: E/ThrottleService(161): problem during onPollAlarm: java.lang.IllegalStateException: problem parsing stats:
I hope apple forum will help for this problem ..

I am able to fix the above issue , but subtype search on the embedded systems throws an erros
ex if type="_book._tcp.,author" throws bad param error but same thing works on the linux pc . Can some tell me how to pass the subtypes in embedded application

Creating Z program for T code FBRA (resetting cleared item)

HI ABAP Gurus,
I have a requirement , please Help me.
One of my client Has executed APP program. through with 100 items are cleared. later they identified those invoice should not be cleared. To Reset this cleared item we have T code FBRA through which we can reset single line item each time.
So we need to develop a new program for Resetting all the items at one instance. Please guide how configure this??
Thanks in Advance
Babu

Yes AFAIK there is no standard report so you have to create your own with usage of FM POSTING_INTERFACE_RESET_CLEAR (*) "Jus" change the parameter of FBRA into SELECT-OPTIONS.
Regards,
Raymond
(*) FI Financial Accounting: Data Transfer Workbench; Accounting Documents: Data Transfer Workbench, Using the Internal Posting Interface.

Problem in creating include program for customer exit for BC425_01

Hi,
I want to write a customer exit for transaction BC425_01. For identifying the include program for exit , i go to System->Status.There I double click on the program name(GUI).Then I perform a 'FIND' in main program for 'customer-function' keyword. I get 3 search results with "CALL CUSTOMER-FUNCTION '001' " , "CALL CUSTOMER-FUNCTION '002' " , "CALL CUSTOMER-FUNCTION '003' ".
Now i double click on CALL CUSTOMER-FUNCTION '001' and i am taken to the code of program where this function is called in MODULE cust_check INPUT. I double click on CALL CUSTOMER-FUNCTION '001' and then I am taken to the function module code which contains a single statement 'INCLUDE ZXBC425G01U01 .' .
Now I double click on this include program so that I can write my own code. But when i double click on it , a message displayed 'Program names ZX.. are reserved for includes of exit function groups'. Hence I am not able to creates this include program and write my coding.
Kindly Help
THANKS

Hi Amber,
Then you click enter button.It is asking to create object with that include name ZXBC425G01U01 in a pop-up.You should select YES option.It will ask package . Give the package name and save.Then include program is created and allowed you to write your own code.
Thanks,
Prasad GVK.

Its possible to Create Bussiness Service for IDOC Communication Channel

HI FRNDS,
My scenario File to Idoc,
When we will go for business Service , Its possible to create Business Service SAP R/3, its a Good advice.
To which Adapters we will use business Service, business System
Regards,
raj

Hi,
This is the basic difference between Business Service and Business System. This will help you in concluding why you use them and hence you can deduce your answer....
Business System
Business systems are logical systems that function as senders or receivers within the SAP Exchange Infrastructure. You configure business systems in the SAP System Landscape Directory (SLD). A business system is always associated with a technical system (here: SAP Web AS ABAP system).
Business Service
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
Regards
Arpil
Reward points for the useful answer

Is it possible to create a program for embedded system

Similar Messages

Maybe you are looking for