Is it possible to create a smaller version of a photobook that's already created?

I've created a photo book that contains about 150 images. While I'm happy with it, I think it's too expensive for most of my family and friends to want to purchase a copy.
Can I create a Save As version from my existing book to make a new book with fewer images?

I found the solution! Right-click on the name of the book file and select Duplicate copy. Then rename it. Couldn't be easier.
Thanks to everyone who was hoping to help.

Similar Messages

How do I create a mobile version of a site that is based on scroll effects and a slideshow background?

I need to create a mobile version for a site that is based on scroll effects and a slideshow background.
Is it possible to copy the format from the desktop version without re-designing all the elements?

Hi
Different renditions will use require the page elements to be optimized accordingly.
So you can surely copy the page elements and paste in phone or tablet layout , but you would need to modify them.
Thanks,
Sanjit

If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

No, you don't need to.

I downloaded the latest version of Pages 5.0 and have been using it for days. Now, when I try to open documents created with this version, I'm advised that I need latest version of Pages to open. What's going on?

First time user. Need help. I downloaded latest version of Pages 5.0 and have been using it. Now, when I try to open documents created by it, I'm advised that I have to downoad Pages 5.0. What's going on?

You have 2 versions of Pages on your Mac.
Pages 5.2.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
You can add the icon of the missing Pages on your Dock or open Pages from the Apple menu > Recent Items list.
Or you can archive Pages 5 so that it doesn't automatically open.
If you are unhappy about this review/rate Pages 5 in the App Store.
Peter

HT2688 I cannot drag and drop songs into a newly created playlist. I have other playlists that I have created but drag and drop no longer works

Almost all of my songs have become located in a My Music folder within the general library of the harddrive of my laptop and are no longer in itunes. When I try to play a song I get the message - "The song could not be used because the original file could not be found. Would you like to find it?"
This works but is impractical as it would take years import all of these songs back into itunes one at atime. How do I import all of the songs from the My Music library folder on my harddrive into itunes? Please help

Playlists are ones I have created, not smart Playlists
You can create either smart playlists (they are purple) or regular (blue) playlists.

How to change to a left outer join an Infoset that is already created?

Hi! I need HELP please!!!
I created a data model based on an Infoset, but at the time to report on WEBI, there is a field that is recognized as a text instead of a date. I've been trying to modify everything i think of but nothing worked!!!!!! So now i want to change my infoset to a left outer join but i can't find where.
Could anyone help me, please!?

Hi,
This is very simple. Just right click on the right operand, you will see the option.

I try to use the App Tab feature. if i close the browser i loose all the App tab that i already create. It should open the App tabs when the brouser starts again.

The benefit of app tab is to save this buttons to use them again later on.
when i close the browser they are lost.

Thank you so so much! I would have never thought to move apps around on my iPad (truth be told the newsstand app is the most useless for me, I wish I could just delete it) and was super happy that iOS 7 allows you finally put that sucker in a file along with the rest of the junk apps I never use.
Solved he issue! I can upload videos to my vlc for iOS player once again!

Is there a way to drag a new playlist onto my ipod without creating doubles of all of the songs that are already on my ipod?

i just want to put the playlist on my ipod but it re adds all the songs that are already on my ipod. do i just have to recreate the playlists on my ipod?

Playlists are just files with pointers. If you have a song on multiple playlists that doesn't mean the song is copied twice. Any instance of a song in playlists just points to the single file it syncs over.
If you have not synced in a while however and the song is already on the phone there is a chance it has been a while and with changes made with each iTunes update or iPhone iOS update, they may have changed the logic of the playlists files or how it manages and organizes the file structure, thus it may be needed to update (resync) some of your files. That is just an educated guess.
What I mentioned first still applies, songs are only copied once even if on multiple playlists. Regular syncing helps keep things fresh and up to date and yes at times there are changes to the process that may cause extra sync time to redo some things an updated way.

I keep getting the message that I am not on the current version of Firefox, but when I attempt to download the latest version I am told that I already have the latest version. What's going on?

I have no more details to provide. The question that I asked summarizes the problem completely.

Since I continue to get the cryptic message, I have decided to try a different browser, namely Google Chrome.

Creating Small Versions of Images

I'm trying to create versions of some images to post on the web. I would like the versions to be much smaller than the originals, say up to 600 pixels on a side. I know that I can specify these dimensions when I export images, but what I'd really like to do is create these small versions in Aperture so I can create albums out of them or bring them into iWeb.
Does Aperture have a way to do this, or do I have to export the images and then import them back into Aperture?
- Hal -

You don't have to create small versions of some of your images. You don't even have to export them. In iWeb, click on the media button and there you have access to your Aperture images you have created a preview for.
When you put your images into web pages in iWeb, you can adjust the size of the images in the inspector. The images saved by iWeb will be at the size you have specified.
Regards
Paul K

Programmatically creating VM from already created image using Java

Hello.
I am writing a Java program to create VMs from already created VM images. I was able to create through the web portal.
I am using the API given here http://msdn.microsoft.com/en-us/library/jj157194.aspx
The request sent is
<?xml version="1.0" encoding="UTF-8"?>
<Deployment xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Name>mltestdeploy</Name>
<DeploymentSlot>Production</DeploymentSlot>
<Label>ZGVwbG95bWVudF9tbHRlc3RkZXBsb3k=</Label>
<RoleList>
<Role>
<RoleName>mltesthost</RoleName>
<RoleType>PersistentVMRole</RoleType>
<VMImageName>ml-centos-image</VMImageName>
</Role>
</RoleList>
</Deployment>
"ml-centos-name" is an existing image with that name and I have used this to create another VM from this image.
I have already created the required cloud service as required by this API.
I am getting error 400 with text as "Bad Request". This means some parameter is wrong.
Any help is very much appreciated.
-Siva

Now instead of the VMImageName, I used SourceImageName as given in the example.
The XML body now looks like
<Deployment xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Name>mltestdeploy</Name>
<DeploymentSlot>Production</DeploymentSlot>
<Label>ZGVwbG95bWVudF9tbHRlc3RkZXBsb3k=</Label>
<RoleList>
<Role>
<RoleName>mltesthost</RoleName>
<RoleType>PersistentVMRole</RoleType>
<ConfigurationSets>
<ConfigurationSet i:type="LinuxProvisioningConfigurationSet">
<ConfigurationSetType>LinuxProvisioningConfiguration</ConfigurationSetType>
<HostName>mltesthost</HostName>
<UserName>mladmin</UserName>
<UserPassword>password</UserPassword>
<DisableSshPasswordAuthentication>false</DisableSshPasswordAuthentication>
</ConfigurationSet>
</ConfigurationSets>
<OSVirtualHardDisk>
<MediaLink>http://portalvhds7dplkth082kmh.blob.core.windows.net/vhds/1v5wpayu.pwl201404160535060424.vhd</MediaLink>
<SourceImageName>ml-centos-image</SourceImageName>
</OSVirtualHardDisk>
</Role>
</RoleList>
</Deployment>
Even now I get the same 'Bad Request' error.
Is there any way to find out which element is causing this Bad Request error? Thanks

Change the order type for a sales document already created

Hi gurus,
please let me know if there is any possibility for changing the order type for sales document (sales order) already created,
thank you

Hi,
Rambabu is correct. Check the alternate sales document types which your current sales document type is having in VOV8 transaction. You can have the current sales document type replaced with the assigned alternate sales document type 1 or alternate sales document type 2 during run time in the during creation or change mode subject to the current sales order is not having any subsequent document. Re-pricing will happen accordingly and all the things of order will get redetermined.
Hope this explains.

Convert an already created pdf to otf

i made an report that takes some pdf from sapscript and takes the otf's and send them as email attachement.
Now i want to incude one more pdf to the same email that is already created and i store it to my fileserver . How can i do this ?
REPORT YDP_SEND_ALL_DOCS_EMAIL.
DATA: ITCPO LIKE ITCPO,
      TAB_LINES LIKE SY-TABIX.
Variables for EMAIL functionality
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: MAILHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: MAILBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: SOLISTI1   LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
TABLES: LIPS,
        LIKP,
        LFA1,
        KNA1,
        ADR6,
        VBKD,
        VBPA,
        VBAK,
        VBRK,
        VBRP,
        MARA,
        T005T,
        VBFA.
DATA : BEGIN OF ITAB OCCURS 0,
        VBELN       LIKE VBRK-VBELN, "billing doc
        NAME1       LIKE KNA1-NAME1, "Customer name
        SMTP_ADDR      LIKE ADR6-SMTP_ADDR,
        END OF ITAB.
DATA: MY_OPTIONS TYPE ITCPO.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TEXT-001.
PARAMETERS: SVBELN TYPE VBRK-VBELN.
PARAMETERS: SNAME TYPE KNA1-NAME1.
PARAMETERS: S_EMAIL TYPE ADR6-SMTP_ADDR.
SELECTION-SCREEN SKIP 2.
PARAMETERS: SUBJ(30) TYPE C.
SELECTION-SCREEN SKIP 2.
PARAMETERS: LINE1 LIKE MAILTXT-LINE.
PARAMETERS: LINE2 LIKE MAILTXT-LINE.
PARAMETERS: LINE3 LIKE MAILTXT-LINE.
PARAMETERS: LINE4 LIKE MAILTXT-LINE.
PARAMETERS: LINE5 LIKE MAILTXT-LINE.
PARAMETERS: LINE6 LIKE MAILTXT-LINE DEFAULT 'The following PDF are produced by SAP and are digitally signed .'.
SELECTION-SCREEN END OF BLOCK B0.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS: YHSD AS CHECKBOX DEFAULT 'X'.
PARAMETERS: ZHAG AS CHECKBOX DEFAULT 'X'.
PARAMETERS: ZPHL AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'S_EMAIL'.
      SCREEN-INPUT = 0.
      SCREEN-INTENSIFIED = 0.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
ENDLOOP.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'SNAME'.
      SCREEN-INPUT = 0.
      SCREEN-INTENSIFIED = 0.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
SELECT SINGLE * FROM VBRK WHERE VBELN = SVBELN.
IF SY-SUBRC = 0.
    SELECT SINGLE * FROM KNA1 WHERE KUNNR = VBRK-KUNRG.
    SNAME = KNA1-NAME1.
    SELECT SINGLE * FROM ADR6 WHERE ADDRNUMBER = KNA1-ADRNR.
    IF SY-SUBRC = 0 .
      S_EMAIL = ADR6-SMTP_ADDR.
    ELSE.
      S_EMAIL = 'No Email Address !!!!'.
    ENDIF.
ELSE.
    S_EMAIL = 'No Email Address !!!!'.
ENDIF.
START-OF-SELECTION.
PERFORM SEND_FORM_VIA_EMAIL.
*&      Form WRITE_FORM
      text
     -->P_WIN      text
     -->P_TYPE     text
     -->P_EL       text
     -->P_FUN      text
FORM WRITE_FORM USING P_WIN P_TYPE P_EL P_FUN.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT                  = P_EL
      FUNCTION                 = P_FUN
      TYPE                     = P_TYPE
      WINDOW                   = P_WIN
   IMPORTING
     PENDING_LINES            =
   EXCEPTIONS
      ELEMENT                  = 1
      FUNCTION                 = 2
      TYPE                     = 3
      UNOPENED                 = 4
      UNSTARTED                = 5
      WINDOW                   = 6
      BAD_PAGEFORMAT_FOR_PRINT = 7
      SPOOL_ERROR              = 8
      CODEPAGE                 = 9
      OTHERS                   = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "WRITE_FORM
*&      Form CLOSE_FORM
      text
FORM CLOSE_FORM.
CALL FUNCTION 'CLOSE_FORM'
     IMPORTING
          RESULT                   = ITCPP
          RDI_RESULT               =
      TABLES
           OTFDATA                  = OTF
       EXCEPTIONS
            UNOPENED                 = 1
            BAD_PAGEFORMAT_FOR_PRINT = 2
            SEND_ERROR               = 3
            OTHERS                   = 4.
ENDFORM.                    " CLOSE_LAYOUT_DSS
*&      Form GET_DATA
      text
FORM GET_DATA.
DATA: BEGIN OF OTF OCCURS 0.
          INCLUDE STRUCTURE ITCOO .
DATA: END OF OTF.
DATA: ITCPO LIKE ITCPO.
DATA: ITCPP LIKE ITCPP.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
PERFORM COLLECT_DATA(YHAL_SHIPPING_DETAILS) USING SVBELN."VBRK-VBELN.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      FORM     = 'YHAL_SHIP_DETAIL'
      LANGUAGE = SY-LANGU
      OPTIONS = ITCPO
      DIALOG   = ' '
    EXCEPTIONS
      OTHERS   = 1.
PERFORM DISPLAY_DATA(YHAL_SHIPPING_DETAILS) USING SVBELN." VBRK-VBELN.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
    EXCEPTIONS
      ERROR_MESSAGE = 01
      OTHERS        = 02.
MOVE-CORRESPONDING ITCPO TO ITCPP.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = ITCPP
    TABLES
      OTFDATA = OTF
    EXCEPTIONS
      OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR SOLISTI1. REFRESH SOLISTI1.
LOOP AT OTF.
    SOLISTI1-LINE = OTF.
    APPEND SOLISTI1.
ENDLOOP.
ENDFORM.                    "GET_DATA
*&      Form GET_DATA1
      text
FORM GET_DATA1.
DATA: BEGIN OF OTF OCCURS 0.
          INCLUDE STRUCTURE ITCOO .
DATA: END OF OTF.
DATA: ITCPO LIKE ITCPO.
DATA: ITCPP LIKE ITCPP.
CLEAR OTF.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
PERFORM COLLECT_DATA(Z111_PACKING_LIST) USING SVBELN."VBRK-VBELN.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      FORM     = 'Z1111_PACKING'
      LANGUAGE = SY-LANGU
      OPTIONS = ITCPO
      DIALOG   = ' '
    EXCEPTIONS
      OTHERS   = 1.
PERFORM DISPLAY_DATA(Z111_PACKING_LIST). "USING SVBELN." VBRK-VBELN.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
    EXCEPTIONS
      ERROR_MESSAGE = 01
      OTHERS        = 02.
MOVE-CORRESPONDING ITCPO TO ITCPP.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = ITCPP
    TABLES
      OTFDATA = OTF
    EXCEPTIONS
      OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR SOLISTI1. REFRESH SOLISTI1.
LOOP AT OTF.
    SOLISTI1-LINE = OTF.
    APPEND SOLISTI1.
ENDLOOP.
ENDFORM.                                                    "GET_DATA1
*&      Form GET_DATA2
      text
FORM GET_DATA2.
DATA: BEGIN OF OTF OCCURS 0.
          INCLUDE STRUCTURE ITCOO .
DATA: END OF OTF.
DATA: ITCPO LIKE ITCPO.
DATA: ITCPP LIKE ITCPP.
CLEAR OTF.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
PERFORM COLLECT_DATA(Z111_AGENCY_NOTE) USING SVBELN."VBRK-VBELN.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      FORM     = 'Z1111_AGENCY'
      LANGUAGE = SY-LANGU
      OPTIONS = ITCPO
      DIALOG   = ' '
    EXCEPTIONS
      OTHERS   = 1.
PERFORM DISPLAY_DATA(Z111_AGENCY_NOTE) USING SVBELN." VBRK-VBELN.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
    EXCEPTIONS
      ERROR_MESSAGE = 01
      OTHERS        = 02.
MOVE-CORRESPONDING ITCPO TO ITCPP.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = ITCPP
    TABLES
      OTFDATA = OTF
    EXCEPTIONS
      OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR SOLISTI1. REFRESH SOLISTI1.
LOOP AT OTF.
    SOLISTI1-LINE = OTF.
    APPEND SOLISTI1.
ENDLOOP.
ENDFORM.                                                    "GET_DATA2
      FORM SEND_FORM_VIA_EMAIL                                      *
FORM SEND_FORM_VIA_EMAIL.
CLEAR:    MAILDATA, MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
REFRESH: MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
Creation of the document to be sent File Name
MAILDATA-OBJ_NAME = 'TEST'.
Mail Subject
MAILDATA-OBJ_DESCR = SUBJ ."'EGGRAFA BIBLOY'.
Mail Contents
MAILTXT-LINE = LINE1.
APPEND MAILTXT.
MAILTXT-LINE = LINE2.
APPEND MAILTXT.
MAILTXT-LINE = LINE3.
APPEND MAILTXT.
MAILTXT-LINE = LINE4.
APPEND MAILTXT.
MAILTXT-LINE = LINE5.
APPEND MAILTXT.
MAILTXT-LINE = LINE6.
APPEND MAILTXT.
Prepare Packing List
PERFORM PREPARE_PACKING_LIST.
Set recipient - email address here!!!
MAILREC-RECEIVER = '[email protected]'.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = MAILDATA
      PUT_IN_OUTBOX              = ' '
    TABLES
      PACKING_LIST               = MAILPACK
      OBJECT_HEADER              = MAILHEAD
      CONTENTS_BIN               = MAILBIN
      CONTENTS_TXT               = MAILTXT
      RECEIVERS                  = MAILREC
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      OPERATION_NO_AUTHORIZATION = 4
      OTHERS                     = 99.
COMMIT WORK.
ENDFORM.                    "SEND_FORM_VIA_EMAIL
     Form PREPARE_PACKING_LIST
FORM PREPARE_PACKING_LIST.
CLEAR:    MAILPACK, MAILBIN, MAILHEAD.
REFRESH: MAILPACK, MAILBIN, MAILHEAD.
DESCRIBE TABLE MAILTXT LINES TAB_LINES.
READ TABLE MAILTXT INDEX TAB_LINES.
MAILDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( MAILTXT ).
Creation of the entry for the compressed document
CLEAR MAILPACK-TRANSF_BIN.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 0.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'RAW'.
APPEND MAILPACK.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
IF YHSD = 'X' .
    PERFORM GET_OTF_CODE.      "----
    LOOP AT SOLISTI1.
      MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
      APPEND MAILBIN.
    ENDLOOP.
    DESCRIBE TABLE MAILBIN LINES TAB_LINES.
    MAILHEAD = 'TEST.OTF'.
    APPEND MAILHEAD.
ENDIF.
Creation of the entry for the compressed attachment
MAILPACK-TRANSF_BIN = 'X'.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 1.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'OTF'.
MAILPACK-OBJ_NAME = 'TEST01'.
MAILPACK-OBJ_DESCR = 'Subject01'.
MAILPACK-DOC_SIZE = TAB_LINES * 255.
APPEND MAILPACK.
IF ZHAG = 'X'.
    PERFORM GET_OTF_CODE1.      "----
    LOOP AT SOLISTI1.
      MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
      APPEND MAILBIN.
    ENDLOOP.
    DESCRIBE TABLE MAILBIN LINES TAB_LINES.
    MAILHEAD = 'TEST1.OTF'.
    APPEND MAILHEAD.
ENDIF.
Creation of the entry for the compressed attachment
MAILPACK-TRANSF_BIN = 'X'.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 1.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'OTF'.
MAILPACK-OBJ_NAME = 'TEST02'.
MAILPACK-OBJ_DESCR = 'Subject02'.
MAILPACK-DOC_SIZE = TAB_LINES * 255.
APPEND MAILPACK.
IF ZPHL = 'X'.
    PERFORM GET_OTF_CODE2.      "----
    LOOP AT SOLISTI1.
      MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
      APPEND MAILBIN.
    ENDLOOP.
    DESCRIBE TABLE MAILBIN LINES TAB_LINES.
    MAILHEAD = 'TEST2.OTF'.
    APPEND MAILHEAD.
ENDIF.
Creation of the entry for the compressed attachment
MAILPACK-TRANSF_BIN = 'X'.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 1.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'OTF'.
MAILPACK-OBJ_NAME = 'TEST03'.
MAILPACK-OBJ_DESCR = 'Ship.details-Agency.report-Packing.list'.
MAILPACK-DOC_SIZE = TAB_LINES * 255.
APPEND MAILPACK.
ENDFORM.                    "PREPARE_PACKING_LIST
     Form GET_OTF_CODE
FORM GET_OTF_CODE.
PERFORM GET_DATA.
ENDFORM.                    "GET_OTF_CODE
     Form GET_OTF_CODE1
FORM GET_OTF_CODE1.
PERFORM GET_DATA1.
ENDFORM.                    "GET_OTF_CODE1
     Form GET_OTF_CODE2
FORM GET_OTF_CODE2.
PERFORM GET_DATA2.
ENDFORM.                    "GET_OTF_CODE2
END-OF-SELECTION.

Hi Dimath,
Try the following FM:
CONVERT_OTF Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
       EXPORTING    FORMAT                = "PDF"
       IMPORTING    BIN_FILESIZE          = FILE_LEN
       TABLES       OTF                   = OTFDATA
                    LINES                 = PDFDATA
       EXCEPTIONS   ERR_MAX_LINEWIDTH     = 1
                    ERR_FORMAT            = 2
                    ERR_CONV_NOT_POSSIBLE = 3
                    OTHERS                = 4.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Adding a Date/Time stamp to videos already created

We have someone using Elemets 8
They need to add in the date/time stamp to video's that are already created.
The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
Anyone out there able to tell me how we can get this done for free

PrE lacks the TimeCode Effect (unless it has been added in PrE 10?), that both PrPro and Adobe After Effects has. However, even that Effect does not do date/time, just Runtime TimeCode, but with some display alternatives.
There are two programs called DVDate. One is/was freeware, and the other was inexpensive shareware. I do not have the two links handy, but believe that either will do what the user wishes.
I know that in the past, one valued contributor, Neale, has posted the links, and has also given the details of what each of the programs can, and cannot do. Maybe he'll drop by this thread, and fill in the blanks that I am leaving here.
Good luck,
Hunt

Adding the date/time stamp to videos already created

We have someone using Elemets 8
They need to add in the date/time stamp to video's that are already created.
The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
Anyone out there able to tell me how we can get this done for free?

Try the Premier Elements forum for video questions. You will get better advice over there. Good luck.
http://forums.adobe.com/community/premiere_elements

Is it possible to create a smaller version of a photobook that's already created?

Similar Messages

Maybe you are looking for