Is it possible to create a variant without selection screen

Hi,
I would like to create a variant for a report(Standard report). It does not have selection screen. Could someone tell me is it possible to creste a varaint for it?
Is it possible to create a variant w/o selection screen? if yes, how?

If some SELECT-OPTIONS are hidden or NO-DISPLAY, you should be able to create a variant for the report.
Rob

Similar Messages

  • Variants without Selection Screen

    Hi,
    if i have a normal Dynpro Screen, and no selection screen, how can i then use the Variants of SAP? I found some FM like RS_CREATE_VARIANT but this does not work. The coding of these Variant helpers always try to read out the fields from the report. But my report has no fields, because it is a dynpro screen and no selection screen.
    Do you know if i can use variants for dynpros?
    Thanks

    Hi Johnny,
    You can create Transaction Variants using SHD0 transaction.
    Have a look at the below SAP link:-
    [Transaction Variants and Screen Variants  |http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/7bc3895d1111d295ad0000e82de14a/frameset.htm]
    Also Have a look at the below wiki :-
    [Creating variants for custom screens|Creating variants for custom screens;
    <removed by moderator>
    Regards
    Abhii
    Edited by: Thomas Zloch on Sep 1, 2010 5:56 PM - please leave this to the original poster

  • How to create a variant for a program without selection screen

    Hi All,
    I've created one program which takes the data from 30 tables and loads into one final table.
    This program is already moved to Production.
    But while creating variant it's not allowing, since the program doesn't have the selection screen.
    Is there anyway where I can create a variant in production without selection screen directly as the program code is already moved to production.
    Thank You,
    Regards,
    Karthik.Ch

    Hi ,
    Are you running this program in a process chain??

  • Is it possible to Create Material Master without Profit Center ?

    Hai,
          1) Is it possible to Create Material Master without Profit Center ? 
          2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
          3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
    Kindly Explain me clearly..
    Thanks & Regards,
    Swetha

    Hi,
    Profit center is at the plant level.
    You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
    while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
    A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
    Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
    For more info,please refer
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
    Regards,

  • Is it possible to create a WBS without Company code

    Hello,
    I am a SAP CRM guy and I am creating a WBS in PS system from CRM Campaigns.
    My question is whether its possible to create a WBSE without having a Comapny code?
    The reason we need this is because we are planning campaigns at a very high level and later we want to procure for these cmapaings at multiple company codes and cost centers through SRM. So we do not want to restrict the WBSE to one comapny code.
    Regards,
    Vicky

    Hi Ammar,
    The reason this scenario does not seem to be feasible is we have a one to one relationship between campaigns and WBSEs. Creating multiple WBSEs would translate as creating multiple campaigns, which we want to avoid at the first place as this increases the amount of data entry for planning and planning will become based on the procurement we is not the right way.
    However, atleast I am sure now that I cannot have WBSE without company code.
    Abdul,
    Now I am thinking whether its possible to create a Project instead of WBSE and then procure wrt project?
    I need to check the possibility of creating project from a campaign, but from the procument perspective, do you know if its possible to procure wrt project?
    Thanks & Regards,
    Vicky

  • Is it possible to create a component without a component controller?

    Hi every one,
    Is it possible to create a component without a component controller?If yes , how and what is the purpose of this?
    Thanks in advance. Points will be rewarded.

    Hi Prosun Bondopadhyay  ,
                   Component controller is the base of a wda component. its can be considered as the base class. all the other views can be considered as the sub classes of component  controller. so without the base class there is no existence for sub class rt?
    like we can use all the methods and attributes of a component controller(main class) across all the view(sub class) and the viceversa is not possible.
    hence we cannot create a wda without component controller.
    Regards
    Sarath

  • Is it possible to create .ncd file without using MAX?

    Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
    Thank you

    Hi,
    the NI-CAN driver software does not provide functions/VIs to generate
    *.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
    look at the example.ncd file that gets installed with NI-CAN
    (<ProgramFiles>\National Instruments\NI-CAN\):
    <?xml version="1.0" encoding="UTF-8"?>
    <nican_config version="0.1">
    <saved>8/8/2005,17:58</saved>
    <message name="TransmissionFluids">
      <id extended="0">82</id>
      <dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
      <conflicts>0</conflicts>
      <bytes>6</bytes>
      <interface>1</interface>
      <comment></comment>
      <channel name="ClutchPressure">
        <conflicts>0</conflicts>
        <bitfield start="0" bits="8" order="0" type="1"/>
        <linear_scaling factor="1.600000e+001"
    offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
    default="0.000000e+000" unit="kPa"/>
        <comment></comment>
      </channel>
    </message>
    </nican_config>
    Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
    -B2k

  • Is it possible to create "places" tags without the maping feature?

    Is it possible to create "places" tags without the maping feature? I updated from PSE 10 (where I created my own list of "places,") to PSE 12, where "places" seems to require the mapping feature. I would prefer not to use the map, and stick to my old way.
    Thanks for any help!
    Tom

    Apparently, not only is the mapping feature required, but once the GPS-loaded Place tag is created, it is not listed in alphabetical order with other place tags.  It is listed by country, then by state, then by title!!  !! VERY irritating!!  And what if I want to create a place tag (of which I already have many) which does not have a recognizeable address, like, say, Grandmother's House?  VERY irritating.
    And if I use the Keyword feature to create Place tags, they will be in an entirely separate list from the other Place tags.  VERY irritating!
    Who designed this upgrade?  I will soon start looking for an alternative, though I have used Photoshop Organizer for years and have thousands of photos in it.  My upgrade to PSE 12 has caused me nothing but headaches.

  • Is it possible to create info record without material number

    Hi all,
    Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
    Thank you for the help.

    Hi,
    1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
    2.Info Update indicator -
    Info record update
        Determines whether the prices and conditions of this purchase order ite
        are suggested in future PO items.
    Use
        Selecting InfoUpdate causes one of the following situations to occur:
            -   If just one info record (with or without plant) exists, it is
                updated.
            -   If no info record exists and "plant condition requirement" was
                specified in Customizing, an info record with plant is created.
                Otherwise, an info record without plant is created.
            -   If two info records exist (that is, one info record with plant
                and one without plant) the info record with plant is updated.
    reward if helpful,
    Regards,
    Chetan.

  • How to create variant for selection screen which is in subscreen

    Hi,
    How to create variant for selection screen which is in subscreen in a module pool program?
    it is very urgent.
    Thanks in advance.

    Hi,
    You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
    To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
    Regards
    Sudheer

  • Variant for selection screen with the Table control entries in another Tab

    Hi Guys,
      The requirement is to create a variant for the two tabs on a selection screen.
      First tab contains the select options and the second contains table control for making entries.
      So will it be possible to create a variant when the user makes entries in the fields in one tab and the table on other tab?

    You wrote
    Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported.
    But, give the variant a name beginning with "CUS&" and this variant will be transported. Variant beginning with "CUS&" or "SAP&" are so-called "system variant" and are  transported automatically. You can then copy the transaction code and use this new variant in the new transaction.
    Regards,
    Raymond

  • Adding layout variant to selection screen

    Hi all,
             Currently I am working on report program, where I have to allow user to select his own output pattern. i.e layout variant is to be added to selection screen. The report uses object oriented ALV for display purpose. [set_table_for_first_display]
    I made following steps,
    1.     Declared one parameter of type disvariant.
    2.     At selection-screen on value-request I called function REUSE_ALV_VARIANT_F4.
    3.     Passed internal table to method set_table_for_first_display.
    Now I am able to create save new variant, on selection screen I can select the variant that I have created, but output shows the all the fields though
    Only few are selected. Please tell me any modification so as to reflect the changes in output.
    I  am searching for a function which maintains fieldcat according to user defined variant.
    Regards,
    Nilesh kulkarni.

    U have to use REUSE_ALV_VARIANT_EXISTENCE inorder to use the layout u have selected
    After ur code of REUSE_ALV_VARIANT_F4.
    try this way
    AT SELECTION-SCREEN.
       PERFORM PAI_OF_SELECTION_SCREEN.
    G_REPID = SY-REPID.
    G_SAVE = 'A'.
    FORM PAI_OF_SELECTION_SCREEN .
      IF NOT P_LAYOUT IS INITIAL.
        MOVE G_VARIANT TO GX_VARIANT.
        MOVE P_LAYOUT TO GX_VARIANT-VARIANT.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
             EXPORTING
                  I_SAVE     = G_SAVE
             CHANGING
                  CS_VARIANT = GX_VARIANT.
        G_VARIANT = GX_VARIANT.
      ELSE.
        PERFORM VARIANT_INIT.
      ENDIF.
    ENDFORM.                    " PAI_OF_SELECTION_SCREEN
    FORM variant_init .
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = G_REPID.
    ENDFORM.                    " variant_init
    Then when u call ALV for display, pass ur display variant, in this case  = g_variant
    Reward if useful
    Cheers
    ~Arun
    Message was edited by:
            Arun Shekhar

  • How to set Variant as selection-screen

    I have a variant i want to set that variant as selection-screen can anyone please tell me how to do that

    Hi Pradeep,
    What is your requirement?
    If you just want to create the variant for the selection screeen, then after entering the values on selection screen just press SAVE button.
    Regards,
    Atish

  • Run alv report without selection screen in background

    Hello Every body,
    i programmed a ALV Report without selection screen, and i want to create a job for this alv report.
    Any help?
    Thank u.
    Ouail.

    Hi Steve,
    Can you tell me where i have to put your code?
    this is my abap code:
    START-OF-SELECTION.
       p_filref = '\\SAPSERVER\f\SAFT\ivat\FI_Extract_1000_20140709_102346_910.XML'.
       PERFORM copy_from_xml_to_itab TABLES it_ref_file
                                     ref_xml_data
                                     USING p_filref.
    **Begin Extraction File
       SUBMIT ZZ_FI_IVAT_EXTRACTOR
       WITH p_bukrs EQ '1000'
       WITH p_gjahr EQ '1998'
       WITH filepath EQ '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
       WITH cldata eq space
       AND RETURN.
       DATA: FILE_TABLE  TYPE TABLE OF SDOKPATH,
       DIR_TABLE  TYPE TABLE OF SDOKPATH.
       CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
         EXPORTING
           DIRECTORY  = '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
           FILTER     = '*.*'
         TABLES
           FILE_TABLE = FILE_TABLE
           DIR_TABLE  = DIR_TABLE
         EXCEPTIONS
           CNTL_ERROR = 1
           OTHERS     = 2.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       "get file name
       LOOP AT FILE_TABLE INTO p_filref.
       ENDLOOP.
       CONCATENATE '\\SAPSERVER\f\SAFT\iVAT_Extractie\' p_filref INTO path.
       PERFORM copy_from_xml_to_itab TABLES t_ext_file
                                     ext_xml_data
                                     USING path.
       PERFORM fill_xml_tab_in .
       perform build_fieldcatalog.
       PERFORM compare_data_ref_ext.
       PERFORM send_email.
       perform display_alv_report.
       PERFORM delete_extraction_file.
    in the perform copy_from_xml_to_itab TABLES it_ref_file......, i use this code:
       CREATE OBJECT gcl_xml.
    *Upload XML File
       CALL METHOD gcl_xml->import_from_file
         EXPORTING
           filename = p_filref
         RECEIVING
           retcode  = gv_subrc.
       IF gv_subrc = 0.
         CALL METHOD gcl_xml->render_2_xstring
           IMPORTING
             retcode = gv_subrc
             stream  = gv_xml_string
             size    = gv_size.
         IF gv_subrc = 0.
           REFRESH gt_xml_data[].
    * Convert XML to internal table
           CALL FUNCTION 'SMUM_XML_PARSE'
             EXPORTING
               xml_input = gv_xml_string
             TABLES
               xml_table = gt_xml_data
               return    = gt_return.
         ENDIF.
       ENDIF.

  • Dinamic variant for selection screen

    Hi,
    I got a requirement where i need  a Dynamic variant for selection screen .There is a date field in the selection screen i want to create  a variant such that when i choose it,it should give the current day date in selection screen.can anyone help me.
    Regards,
    Ravi

    Hi,
    Using Customer Exit code you can give it.
    Create a Customer Exit Variable and write simple code in CMOD. See the usefull Exit code for reports in the following url.
    https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    WHEN 'ZV_DAT'.
        IF i_step = 1 .
          CLEAR l_s_range.
          l_s_range-low = sy-datum.
          l_s_range-opt = 'EQ'.
          l_s_range-sign = 'I'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
    Thanks
    Reddy

Maybe you are looking for