Is it possible to create a WBS without Company code

Hello,
I am a SAP CRM guy and I am creating a WBS in PS system from CRM Campaigns.
My question is whether its possible to create a WBSE without having a Comapny code?
The reason we need this is because we are planning campaigns at a very high level and later we want to procure for these cmapaings at multiple company codes and cost centers through SRM. So we do not want to restrict the WBSE to one comapny code.
Regards,
Vicky

Hi Ammar,
The reason this scenario does not seem to be feasible is we have a one to one relationship between campaigns and WBSEs. Creating multiple WBSEs would translate as creating multiple campaigns, which we want to avoid at the first place as this increases the amount of data entry for planning and planning will become based on the procurement we is not the right way.
However, atleast I am sure now that I cannot have WBSE without company code.
Abdul,
Now I am thinking whether its possible to create a Project instead of WBSE and then procure wrt project?
I need to check the possibility of creating project from a campaign, but from the procument perspective, do you know if its possible to procure wrt project?
Thanks & Regards,
Vicky

Similar Messages

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

Is it possible to create a component without a component controller?

Hi every one,
Is it possible to create a component without a component controller?If yes , how and what is the purpose of this?
Thanks in advance. Points will be rewarded.

Hi Prosun Bondopadhyay ,
Component controller is the base of a wda component. its can be considered as the base class. all the other views can be considered as the sub classes of component controller. so without the base class there is no existence for sub class rt?
like we can use all the methods and attributes of a component controller(main class) across all the view(sub class) and the viceversa is not possible.
hence we cannot create a wda without component controller.
Regards
Sarath

Is it possible to create .ncd file without using MAX?

Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
Thank you

Hi,
the NI-CAN driver software does not provide functions/VIs to generate
*.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
look at the example.ncd file that gets installed with NI-CAN
(<ProgramFiles>\National Instruments\NI-CAN\):
<?xml version="1.0" encoding="UTF-8"?>
<nican_config version="0.1">
<saved>8/8/2005,17:58</saved>
<message name="TransmissionFluids">
<id extended="0">82</id>
<dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
<conflicts>0</conflicts>
<bytes>6</bytes>
<interface>1</interface>
<comment></comment>
<channel name="ClutchPressure">
    <conflicts>0</conflicts>
    <bitfield start="0" bits="8" order="0" type="1"/>
    <linear_scaling factor="1.600000e+001"
offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
default="0.000000e+000" unit="kPa"/>
    <comment></comment>
</channel>
</message>
</nican_config>
Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
-B2k

Is it possible to create "places" tags without the maping feature?

Is it possible to create "places" tags without the maping feature? I updated from PSE 10 (where I created my own list of "places,") to PSE 12, where "places" seems to require the mapping feature. I would prefer not to use the map, and stick to my old way.
Thanks for any help!
Tom

Apparently, not only is the mapping feature required, but once the GPS-loaded Place tag is created, it is not listed in alphabetical order with other place tags. It is listed by country, then by state, then by title!! !! VERY irritating!! And what if I want to create a place tag (of which I already have many) which does not have a recognizeable address, like, say, Grandmother's House? VERY irritating.
And if I use the Keyword feature to create Place tags, they will be in an entirely separate list from the other Place tags. VERY irritating!
Who designed this upgrade? I will soon start looking for an alternative, though I have used Photoshop Organizer for years and have thousands of photos in it. My upgrade to PSE 12 has caused me nothing but headaches.

Is it possible to create info record without material number

Hi all,
Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
Thank you for the help.

Hi,
1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
2.Info Update indicator -
Info record update
    Determines whether the prices and conditions of this purchase order ite
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
reward if helpful,
Regards,
Chetan.

Contract from centralized purchase organization without company code

Hi Experts.
We have six company codes
And having one centralized purchase organization and it is not assigned to any company codes
While creating contracts all company code uses this centralized purchase organization.
My question is :-
I want to create contract with above centralized purchase organization without company codes in it so while converting above contract to po we can use any one company code in the po.
How to create contract with centralized purchase organization without company code? (Later this contract can be used to convert po from any the company codes )
Please helpu2026
Thanks in Advance
Prashanth.Venkategowda

Hi,
What you need to do is:
In SPRO->Org.Structure->Definition->Materials Management->Maintain
Purch. Org. you need to "declare" all your Purch. Orgs.
In "SPRO->Org.Structure->Assignment->Materials Management->Assing
Purch. Org. to company code" you must NOT assign your corporal Purch.
Org to any company.
In the Plant assignment screen assign your corporal Purch. Org to all
the relevant Plants.
In this kind of hierarchy you make all the purchasing activities
(contracts, PO's etc.) for this purch org.
Thats all.
In the case that you have 2 level hierarchy: one corporal and many
company\plant assigned purch. orgs you need to do additional step.
After assigning a "small" purch. orgs to the plants and companies you
can assign them to "reference" Purch Org. (that not assigned itself to
any plant/company) in the ""SPRO->Org.Structure->Assignment->Materials
Management->Assing Purch. Org. to reference Purch. Org."
That kind of hierarchy allows you to make a contracts at the "reference"
org. level and use them in PO's by the lowest purch. orgs.
Hope that it will help.
Regards,
Udaya.

Contract from purchase organization without company code

Hi Experts.
We have six company codes
And having one centralized purchase organization and it is not assigned to any company codes
While creating contracts all company code uses this centralized purchase organization.
My question is :-
I want to create contract with above centralized purchase organization without company codes in it so while converting above contract to po we can use any one company code in the po.
How to create contract with centralized purchase organization without company code? (Later this contract can be used to convert po from any the company codes )
But now while creating contract it is asking company code .
Please helpu2026
Thanks in Advance
Prashanth.Venkategowda

Hi,
You can solve this query by using reference pur org.
Assign reference pur org to company codes and plants.Assign pur org to reference pur org.
for configuration settings please refer the below links.
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/purchasing-org-assigment-to-multiple-company-codes-plants-1041710
Making centralized contract
Hope it helps you.
Thanks.

Create Idocs based on Company Code change & Line Items less than 950

Dear all,
I am trying to create the Idocs based on the flat file in the following way.
1) Create the Idoc per company code
2) If company code exceeds 950 lines then create another Idoc
I am trying to follow this BLOG and could not be able to achieve it because in the Blog explained with flat structure and my case is Idoc structure.
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
I changed the Idoc Occurrence and imported to External definition.
I am able to do the both check individually but not able to put them in combining.
Please advice..
Regards

Company Codes -> sort -> SplitbyVlaue(Valuechange) -> CollapseContexts -> remove contexts
AND
Contact(CompanyCodes, Lines) both in header context - removeContexts - SortbyKey(CompanyCodes) -
formatbyExample(Company Codes -> sort -> SplitbyVlaue(Valuechange)) - count - greater(>950)
Srikanth Srinivasan

Is it possible to create a PO without account Assignment or condition Info

Is it possible to create a purchase order with out Account Assignment ( not even single account assignement).
Is it possible to create a purchase order with out condition Information ( not even single condition information)

1. Yes, it can possible to create a purchase order with out Account Assignment ( not even single account assignement).
It depends upon the SPRO settings.
2. Condition Information is must for PO.
If helps please award points.
Thanks.

Is it possible to create a variant without selection screen

Hi,
I would like to create a variant for a report(Standard report). It does not have selection screen. Could someone tell me is it possible to creste a varaint for it?
Is it possible to create a variant w/o selection screen? if yes, how?

If some SELECT-OPTIONS are hidden or NO-DISPLAY, you should be able to create a variant for the report.
Rob

Create BP and then customer create without company code

Hi,
I have some problem with the business partner to create customer. When I create a bp the process create automatically the customer but with out the company code, sales org., distrisbution and division.
I try to find the best way to do it, I try the TCode FLBPD1 and FLBPD2 but no more luck.
Appreciate your advice.
Thank you.

Hi Andre,
If I understood your requirement correctly, when you're creating BP in the foreground, you want the corresponding customer to be created in the background automatically.
Ensure that the following configuration is maintained for BP- Customer automatic determination:
Step1: Define BP number range:
Business Partner>> Relevant settings for Business Partner in RE Context>> General Settings for Business Partner>> Business Partner>> Number range & Groupings>> Define number range.
Step2: Define Groupings & assign number range:
Business Partner>> Relevant settings for Business Partner in RE Context>> General Settings for Business Partner>> Business Partner>> Number range & Groupings>> Define groupings & assign number range.
Step3: Assign account group to the customer:
Flexible Real Estate Management (RE-Fx)>> Business Partner>> Business Partner- Customer>> Number Assignment: Assign Account Group to Customer
Step4: Automatic creation of customers (Company-code dependent):
Flexible Real Estate Management (RE-Fx)>> Business Partner>> Relevant settings for Business Partner in RE Context>> Business Partner - Customer>> Standard Values for Autom. Creation of Customers (Company-Code-Dependent)
Ensure the company code is maintained with Real Estate Contract Application Category in this node.
Step5: Check the field groupings is correctly matched to the BP type:
Flexible Real Estate Management (RE-Fx)>> Business Partner>> Basic Settings>> Field Groupings>> Configure Field Attributes per Business Partner Type.
Hope this helps to you.
Thanks
Shantanu Kar

Creating order with out Company code and plant - just for pricing -possible

Hi gurus
Just for creating sales order (let us say no delivery and no billing, client was not intrested in the initial setup) for just pricing thing, does we really need Company code and plant. with out that just with sales org setup(sale org+D.C) can I create an order to full fil the pricing scenario.
Please I need help on this
Thanks
Kris

hi kris,
we cannot create a order with out company code and plant , due to the following reasons
we do not require the company code to create the order , but we require the plant to create a material and use it in the sales order .and we require a company code to create a customer .
the pricing procedure is determined depending upon the sales area(sales org+distribution channel +division).
please reward the points if it is helpful
Regards,
Murali

How to create request for extracting company code

Hi All,
Can any body guide me how to create a request for extraction of company code 0COMP_CODE_ATTR.
Actually i have created a request using transport conneciton but while moving this request to quality system i am getting following error.
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Mapping between data source 0COMP_CODE_TEXT and source system QLTCLNT440 is inconsistent
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Field KEY1 will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Field TXTMD will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Start of the after-import method for object type R3TR ISTS (Activation Mode)
Reference to transfer structure 0COMP_CODE_TEXT_BB not available. No activation possible.
Start of the after-import method for object type R3TR ISTS (Delete Mode)
Start of the after-import method for object type R3TR ISMP (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
The errors affect the following components:
BW-WHM (Warehouse Management)
Actually i have checked in Quality system 0COMP_CODE_TEXT is availble active. But i think we have to use 0COMP_CODE_ATTR data source...
Pls help,,,
Regards,
viren.

Hi Viren,
Glad that your problem is resolved.
Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
Bye
Dinesh

How to create a material for company code ??

hii
Is it possible to create material company code wise .???
If not , explain me the reason ??
Only plant wise is possible in standard SAP??
Thanks

Hello,
Their is no such Company code level data for material master. So material master can be maintained at three level 1) Cleint level 2) Plant level 3) Storage location level
Basic data 1 and Basic data 2 views-----General data --Client level data
Purchasing , MRP Veiws and ---Plant level data
General plant/Stor 1 and Stor 2---Storage location level.
SO you are having the only one company code then, you can say Client level data is company code data.
Regards
Mahesh Naik

Is it possible to create a WBS without Company code

Similar Messages

Maybe you are looking for