Is it possible to create an installation file, or JumpStart file, for iCS 2.x?

Is it possible to create an installation file using the
"setup -k" command for
iPlanet Calendar Server(iCS) 2.1? And is it possible to install iCS 2.1 with
JumpStart
from an installation server, or do I need to use the installation log?
<P>
The installer for iCS 2.x does not support silent installation (the
setup -k command). To install
iCS 2.x, the system administrator must run the installer directly on each
system where the calendar server is to be installed.
<P>
Silent installation may be supported on a future release.

Wanted to know if [...] is possible to create an offline file(.cab) of our current, company specific Windows Updates.
No.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

Is it possible to create a custom display type in DIAdem, for example a speedometer type instrument?

As an example I have velocity data which shows a vehicle accelerating from rest to 60 km/h and then travelling at a constant speed. As opposed to displaying this data using a 2D axis system is it possible to create a new speedometer display type to display this information? Maybe this display type already exists but I have not come across it yet? I've been using DIAdem for a few days now. The current version I am using is 11.2. It has been suggested in the past that it was possible to display data using numeric displays etc but I can't seem to find the features in v11.2. Thanks for your help in advance.

Hey Matthew,
I'm sorry for the [extremely] delayed reply - I have been out of the office (and out of the country) for two weeks with extremely limited email access. I've attached the files that I used to create the example you saw in the YouTube video embedded above. Please note that I threw this together pretty quickly for the video, and that it is not "commercial quality." Use this as a proof-of-concept upon which to elaborate to get started.
The parts are:
CAN Synchronization.tdv
This is the DIAdem VIEW Layout that contains the video, map, 2D axis, and embedded user dialog with ActiveX gauge control. Think of this as the "user interface" you see in the video.
Gauge.sud
This is the scriptable user dialog (SUD) box that is embedded in the VIEW Layout described above. It contains the ActiveX control which I have affectionately named "MyGauge."
DisplayCursorCommand.vbs
This is the short script that is designed to react to the event that fires when the cursor is playing in DIAdem VIEW. I have commented all 5-ish lines with their functionality.
In order to register the script so that it fires in reaction to the event when the cursor is playing, I chose to register it as a DIAdem UserCommand (Settings » Options » Extensions » User Commands) and then run the line of code:
View.Events.onCursorChange = "DisplayCursor"
You could do this elsewhere within some other script.
Let me know if you have any questions!
Derrick S.
Product Manager
NI DIAdem
National Instruments
Attachments:
Gauge.zip ‏7 KB

Is it possible to create a new tab in 'Default settings for items' option?

Hi everybody
I am Raghu working in EBP2.0 & I have come across a difficlty and that is of creating a new tab and also the fields 'GL a/c', 'cost centre' or 'internal order' in this new tab.
First of all please let me know whether is it possible to create a new tab for these fields.
The purpose of this new tab is to default the cost centre and GL account with reference to shopping cart.
As per current scenario, user has to enter the cost centre & the GL code as many times as the number of items in a shopping cart. I mean, if you have 10 items in your shopping cart then 10 times user has to input the cost centre & GL account. To avoid this we are required to add new tab so that per shopping cart we can enter the GL account & cost centre only once.
Your immediate response would be very much apprecited.
Regards
Raghu

hi Ram & Sreenivas
Thanks for your immediate response.
Ram, we can default GL a/c & cost centre in org structure since client wants to us to keep the option of entering these for every shopping cart.
Sreenivas, I checked the 'copy to clipboard' option & its not there in EBP2 and I feel what you meant as cost centre tab is account assignment tab.
Let me explain you more clearly about this requirement.
Current Scenario
1.Say a user has added 5 items to his SC.
2.User has to enter cost centre & GL code 5 times & then he can order
Required scenrio
1.Say a user has added 5 items to his SC.
2.As per the proposed functionality, user will click on 'Default settings for items' button. Three tabs will appear-->Basic data, Internal note & Delivery Address.
We have to provide a new tab here where in user will default his GL & cost centre for this shopping cart & then order. This will help user to avoid entering GL & cost centre 5 times.
For some reasons our client is not interested in defaulting this data.
Please help in this regard if time permits.
Thanks
Raghu

Create additional installer error code -12 file not found from device driver cd

I'm trying to build an installer for a project that includes several NI drivers - specifically NI-DMM. NI-SCOPE, NI-SWITCH, NI-845x, and a few others (MAX, DAQ, etc). When I build the software standalone (and only include the run-time engine), it works fine. However, when I try to build the installer with the additional installers (mentioned above), the build prompts me for device driver cds, and then fails. Specifically, it fails on the February 2006 Device Driver cd. The error is attached below.
I have tried
- repairing all the installations of the software mentioned
- using a new project and re-adding the files
- building the additional installers seperately (no source code installed)
- copying the driver cds to the harddrive and referencing them there when needed
The next step will be to reinstall all of those drivers from scratch, but I really would prefer not to. Does anyone have any ideas (or solutions) regarding this problem?
CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> CDK_Engine_PromptForMissingDist.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI-845x Software 1.0.1' from: C:\National Instruments Downloads\NI-845x\1.0.1\ to: C:\PTF\Builds\**********************<edited out>
Copying distribution 'National Instruments Device Drivers - February 2006, Disk 1' from: C:\National Instruments Downloads\DCD-Feb06-1\ to: C:\Program Files\National Instruments\Shared\ProductCache\
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the file specified.
*** End Error Report
Done building deployment

I have had this happen a lot espescially with LV 8.0 -8.20. What I had to do was take the device drivers CD and copy it to the and run the installation of the software from the copy on the hard disk.
When you build an exe with additional installers it looks at the last place that you installed the drivers from. Anyway it worked for me so it might work for you.
Joe.
"NOTHING IS EVER EASY"

URGENT ! Is it possible to create a xml data control description file

We are encountering serious problem when generating data control against java bean build from java classes generated with xml top link mapping.
As workaround we have created a new xml schema that generate the java classes in a way data control may be generated correctly but we have to declare manually each class for java.util.list attribute that are not types by top link.
Unfortunately some classes seem not to described by a data control xml files for a reason we cannot understand because others similar classes are correctly described.
To gain time - we have to finish our development -we would force de data control structure by manually adding class data control definition file that are missing.
Just adding the file in the pasckage is not sufficient.
What do we have to update to make this file active ?

Solved my problem by referencing the parent class correctly so the child class xml definition was created by the data control wizard and editable in the structure window.

OK cool ? is it possible to create a new empty Cache.db file in Mountain Lion if so how?

So let me know if it is at all possible

Oh ok but i have noticed that not all of the time for example Activity Monitor use to use it but it has never been recreated after i delete it why might that be?

Is it possible to create a subscription page with different options for blog, newsletter, product announcements, training events, etc?

I would like to create a subscription page for my Muse site with different subscription choices, but I am not sure if it is possible or, if it is how I should construct it. Any ideas?

Hi
This can be done from hosting platform end. If you are using Business Catalyst to host your site , then you can use events module, campaign subscriptions , secure zone subscriptions etc.
You can create the events/announcements on BC end and then add the module in Muse page which on publish will show the modules on page.
Thanks,
Sanjit

Is it possible to create a web page to launch Reflection for UNIX and Digital program using Dreamweaver CS6?

I am planning to create a web page that could launch Reflection for UNIX and Digital program as part of my project in my working area.
Is this possible?
I am a beginner in using DW. I am still studying how to properly use Dreamweaver thinking that I could provide the requirement of my project.
Thank you for your comments.

This is a question for Attachmate, the maker of Reflection, not Adobe, the maker of Dreamweaver.
Dreamweaver is a tool, not a technology. It builds applications using HTML and Javascript that run on web servers using the HTTP protocol. So I think the question to as Attachmate is:
Can Reflection be launched from an apache webserver using HTML, PHP or Javascript?

Is it possible to create an iPhoto slideshow with a menu for each child?

I want the DVD to open with three photos: Karen's, Lori's and Amy's.
When Karen clicks her photo, three more of her photos will appear: a baby photo, a school-age photo, and an adult photo. If she wants to watch a slideshow of her baby pictures, she will click the baby photo...
Each daughter will have a similar setup - three slideshows for each of them. I'm not very picky about which theme will do the job.
I have checked two books and the Apple tutorial and can't find a similar example.
This is only my second slideshow. Any help will be appreciated!
Flat Panel iMac (still love it) w/superdrive Mac OS X (10.4.4) iLife'06, 512 mb ram, 200 GB and 250 GB hard drives, wireless network

Yes this can be done.
First create the 9 slideshows you need in iPhoto......for each one, when finished use the "Send to iDVD" to create a QT movie of each slideshow......be sure to pick the music/playlist in iPhoto (unless you want to use iMovie for that and other things...). When iDVD opens, just close it without saving.
Then open iDVD and choose a menu. As an example, choose "Portfolio Color". Retitle it to "Daughters" or whatever you want.
Then click on the "+" sign at the lower left, and choose "add submenu" -do this two more times yo get three folders. Then click on the media button, and choose three photos to use as a button instead of the folder. Just drag each photo onto the folder. Rename each submenu to Karen, Lori and Amy. Click once on the text, wait, then click again and edit.
Then double click on one submenu. Drag in the correct three iPhoto movies you exported using the "Send to iDVD" command. By default, they go to your home directory in the Movies folder. You can also find them using the Media tab in iDVD and look for Movies.
Go back to the "Main" menu using the back arrow (double click on it).
Repeat for the other two submenus.
Hope this helps,
John B

Is it possible to create the ALV output with dropdown list for the columns

Hi forum experts,
Could the ALV output contain the dropdown list for the column names? if yes, then how we can acheive this to happen.
Thanks in advance,
Regards,
Samad.
Edited by: Samad arif on Aug 21, 2009 4:40 PM

Hi Arif,
Yes we can .FOr the codding check the article,
[dropdowns in ALV|https://wiki.sdn.sap.com/wiki/display/Snippets/DropdownsinALV]
regards,
Archana
Edited by: Archana Kumari on Aug 21, 2009 1:22 PM

InDesign CS6: Is it possible to create a pdf in which the version for printing is different from that on the screen?

hello,
Everything is in the title!
The idea is to make a pdf that I send to clients by email, very graphic with colored backgrounds but when printed, the background becomes white to save ink. Similarly to the change of color of the text.
For example, on the screen when I open a pdf I see white text on a blue background but the impression we see black text on white background.
thank you

hi Bob,
With a little delay & my apologies, anyway, after a little test, your solution works very well. thx!!
A more flexible solution was given to me on the French forum by Mr. JR Boulay
"We need to generate 2 PDF, one with color and one in black and white. Open the PDF with Acrobat b & w and in the layers palette ask "Import as Layer" color PDF.
Who will come on top. In the Layer Properties it only remains to define the PDF / color layer as "not printable."
It will just be careful that the color PDF has no white background because in PDF it means transparency and thus we see through ...
(Just use black backgrounds at 1% to fix this problem). "

Is it possible to create .msg Outlook file in CRM?

Hello,
I am talking in regard to the CRM 5.0 IC Web Client and wanted to know if it's possible to create Outlook Message Format (.msg) type file for any E-Mail message with it's attachments?
Thanks and Regards,
Vasu

Hi Vasu,
Did you manage to get a solution on this? I have a similar requirement as well.
Thanks,
Angel

How can I create an installer?

Hi!
I am working with LabVIEW Version 8.6.1.
After I have built an Application (exe) I would like to create an installer. Therfore I open the window "my installer properties" in my Project.
After I got the "product information" I go ahead to "source files". First question: Which files must be include in the "destination view" on the right site of the window???
The "builds" file???
If I do this and go ahead with "additional installers" I select "NI LabVIEW Run-Time Engine 8.6.1". After that I click the bottom "build".
The build status open. Than I get a default:
build errors:
the build was unsuccessful
The following file(s) are not found on the system:
I think it has to do with the source files which I have to include. But I do not now which one!!!
Can somebody help me???
Marc

You will indeed need to create an executable from your project first and then add this to your installer build.
Here are a few links on how to create an installer, could be very useful for your issue:
Distributing applications with application builder:
http://zone.ni.com/devzone/cda/tut/p/id/3303
Including additional installers:
http://digital.ni.com/public.nsf/websearch/E09BA0E2F31D304F86256A640070058E
Missing distribution:
http://digital.ni.com/public.nsf/allkb/C3666BA408F81E59862570D20056E692?OpenDocument
Best regards,
AdamF
Applications Engineer
National Instruments
Adam
Academic Product Manager
National Intruments

Can I create multiple links to the same file without duplicating file?

does anyone know if it is possible to create multiple links to the same file using iWeb without the program automatically making multiple copies of that file in the published output? It seems that one file is created for each link.
Thanks!

Hi Franz,
have a look at the second method on this page
http://alyeska.altervista.org/en/iWeb_Downloads.html
see if you understand how it works (if you don't, please ask me)
Regards,
Cédric

Re: Satellite L40 PSL48E: Can I create a installation disk from Vista partition

Hi,
my Satellite L40 PSL48E came with a Vista recovery partition.
As I despise Vista I bought a replacement drive and installed a new hard-drive and installed XP pro.
I retained the original drive in case i ever had to claim under warranty.
I now find that due to work commitments I have to occsionally use the despised Vista rubbish and wonder if it is possible to create a Installation disk from the partition on the original drive so tha ti can create a dual boot system on my new drive.
I am very reluctant to BUY a new Vista CD since I already have a fully legal copy on a drive which I am not using and I will only use it VERY rarely for this one work commitment.
Any information gratefully received
Thanks Ron

OK and thanks.
My next problem is this. I have XP on the main partition and WinRE on the hidden partition. How the heck do I get at the hidden partition. I don't have any boot disks ( none were provided with the machine when I bought it new. Pressing F8 only takes me the the normal XP options Safe boot boot as normal etc.
I've tried f10 and f12 and f11 tas I've seen these suggested on a few newsgroup posts. Anyone got any ideas please.
Toshiba Recovery Disc creatoe seems to be the key from what i read but if this is not present how do i get to the hidden partition and run it?
HELP please. How i hate the fact that manufacturers don't provide a proper CD or DVD anymore it is a right PITA.
Ron

Is it possible to create an installation file, or JumpStart file, for iCS 2.x?

Similar Messages

Maybe you are looking for