IS it possible to create control file in FAT32

I have an external disk with fat32.The version 9.2 in win2k
Will i be able to create in external hard disk .The Oracle software in installed in NTFS
The create database fails with followin error.
orA-01501: CREATE DATABASE failed
orA-00200: controlfile could not be created
orA-00202: controlfile: 'F:\oracle\oradata\QSNY\control01.ctl'
orA-27040: skgfrcre: create error, unable to create file
osD-04002: unable to open file
oS-Error: (OS 5) Access is denied

It looks like an OS permission problem.
Oracle should have no problem access FAT32 if setup correctly. However, in Installation Guide, it recommended to use NTFS.
Is there any reason you want to have this disk FAT32 ?

Similar Messages

Error while creating control file

hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size                  1250548 bytes
Variable Size             171969292 bytes
Database Buffers          452984832 bytes
Redo Buffers                2940928 bytes
SQL> @c:\study\rose\c.sql
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2      MAXLOGFILES 32
3      MAXLOGMEMBERS 2
4      MAXDATAFILES 32
5      MAXINSTANCES 16
6      MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>

CHETAN YADAV wrote:
hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size                  1250548 bytes
Variable Size             171969292 bytes
Database Buffers          452984832 bytes
Redo Buffers                2940928 bytes
SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2 MAXLOGFILES 32
3 MAXLOGMEMBERS 2
4 MAXDATAFILES 32
5 MAXINSTANCES 16
6 MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>

Is it possible to create a file in servlet context? pls help me

Is it possible to create a file in servlet context? pls help me

Surely it is possible.File file = new File(path, name);

I am getting error while creating Control file for a fla file upoad in HANA

Hi Experts,
I am getting the following error when I try to create crtrol file for a flat file extraction in SAP HANA.
Could not execute 'import data into table P935718."COPATBL" from 'COPATBL.csv' record delimited by '\n' fields ...'
SAP DBTech JDBC: [257] (at 14): sql syntax error: incorrect syntax near "into": line 2 col 1 (at pos 14)
Here is the code I have used to create control file after I creating the table.
import data
into table P935718."COPATBL"
from 'COPATBL.csv'
    record delimited by '\n'
    fields delimited by ','
    optionally enclosed by '"'
error log 'P935718.COPATBL.err'
p935718 is my user ID, COPATBL is my table created, COPABL.CSV is a flat file.
Please help me in this regard.
Thanks,
Guna

Hello,
guessing from the error message it looks that you are trying to execute "import data" as SQL command.
Please note that import data is NOT SQL command but it is syntax for control file. You need to create file with this syntax on server and then use command: IMPORT FROM '/<path>/<filename>.ctl'
In a shortcut:
1.- create comma separated CSV file with your data - <source cvs>.csv
2.- upload CVS file to HANA server
3.- create the control file <filename>.ctl:
import data
into table <schema>."<table name>"
from '<source cvs>.csv'
record delimited by '
fields delimited by ','
optionally enclosed by '"'
error log '<file name>.err'
4.- execute command:
IMPORT FROM '/<path>/<filename>.ctl'
Please check following threads:
How to load CSV files into HANA
Will HANA supports Bulkload
Tomas

Error creating CONTROL FILE

I have a problem while installing 9iAS R2 on RH LInux 8.
When database configuration assistant starts during the installation of 9iAS infrastructure, it gives an error "Error creating CONTROL FILE" followed by many other errors.
Please help me out.
Zulqarnain

I had the same problem, but with RH9
To fix, I ran orapwd from the $ORACLE_HOME/bin directory to create a password file called orapw. Then I moved this file to the directory where the configuration assistant complains it cannot find the file. Fixed. Obviously, just ignore the errors from the configuration assistant about the CONTROL FILE until it tells you the location of the file it is looking for.

11i RW-50004 while creating control file...

Dear all,
Kindly let me know what this log file sys...
I am trying to install 11i on OEL4.6 with 2GB RAM in VMware for Important test purpose. While creating control file in second stage i am getting this Error:,,
RW-50004 : Error code received when running external process.
Check log file for details.
I have check ORALCEHOME/appsutil/log/SID/04270524.log
Please let me know this error.
Regards
GAZA
Creating the control file for abc_apps11i database ...+
SQLPlus: Release 9.2.0.5.0 - Production on Fri Apr 27 06:23:10 2012*+
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.+
ERROR:+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ERROR:+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
SP2-0640: Not connected+
SP2-0640: Not connected+
SP2-0640: Not connected+
SP2-0640: Not connected+
ORA-01012: not logged on+
ERROR:+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
SP2-0640: Not connected+
SP2-0641: "EXECUTE" requires connection to server+
ORA-01031: insufficient privileges+
ERROR:+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
SP2-0640: Not connected+
SP2-0640: Not connected+
SP2-0640: Not connected+
SP2-0640: Not connected+
SP2-0640: Not connected+
exit_code=0+
Checking for errors ...+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ORA-01012: not logged on+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
The database has not been successfully created. Shutting down the instance ...+
SQLPlus: Release 9.2.0.5.0 - Production on Fri Apr 27 06:23:12 2012*+
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.+
ERROR:+
ORA-01031: insufficient privileges+
ORA-01031: insufficient privileges+
Cannot create control file for abc+
RW-50010: Error: - script has returned an error: 9+
RW-50004: Error code received when running external process. Check log file for details.+
Running Database Install Driver for abc instance+

Please make sure the user accounts for the installation (applmgr/oracle) have full privileges.
Oracle Applications Installation Guide: Using Rapid Install -- Page 1-9
http://docs.oracle.com/cd/B25516_18/current/acrobat/r115102ins.pdf
If you still have the same issue, please upload all the log files to any free hosting website and post the link here so we can review it.
Thanks,
Hussein

Urgent: DBrefresh error 354 while creating control file, oracle9i, SAP R3

Hi experts,
I have created trace file in Source system and moved the same to target system and edited and then while executing the trace file to create control file the following eeror is coming
my trace file is like this. . .
STARTUP NOMOUNT
CREATE CONTROLFILE SET DATABASE "P47" RESETLOGS ARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
    MAXLOGFILES 255
    MAXLOGMEMBERS 3
    MAXDATAFILES 336
    MAXINSTANCES 50
    MAXLOGHISTORY 8168
'/oracle/P47/sapdata9/btabd_63/btabd.data63',
'/oracle/P47/sapdata9/stabi_27/stabi.data27',
'/oracle/P47/sapdata9/btabi_122/btabi.data122',
'/oracle/P47/sapdata9/stabd_28/stabd.data28',
'/oracle/P47/sapdata9/btabi_123/btabi.data123',
'/oracle/P47/sapdata9/btabd_64/btabd.data64',
'/oracle/P47/sapdata9/btabi_124/btabi.data124'
CHARACTER SET WE8DEC
i run command like this:
SQL> @/oracle/P47/saptrace/usertrace/control.sql
ORACLE instance started.
Total System Global Area          1249618992 bytes
Fixed Size                                     732208 bytes
Variable Size                             788529152 bytes
Database Buffers                       459022446 bytes
Redo Buffers                                1335296 bytes
<b>354</b>
when I press 'enter' again SQL prompt is comming
Please help
rgds

Hi markus,
thanks for reply . .
control files are not created. . . .
alertSID logs shows as follows
orap47> tail -f alert_P47.log
ARCH shutting down
Thu Dec 13 13:01:51 2007
ARC0: Archival stopped
Thu Dec 13 13:01:51 2007
ARC1: Archival stopped
Thu Dec 13 13:01:54 2007
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
<b>When @/oracle/saptrace/usertrace/control.sql command given in sepearate SQL window</b>
Thu Dec 13 13:03:37 2007
Starting ORACLE instance (normal)
Disable cache advisory with old cache parameters
Thu Dec 13 13:03:37 2007
WARNING: EINVAL creating segment of size 0x000000004b800000
fix shm parameters in /etc/system or equivalent
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 3
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes                = 80
sessions                 = 96
timed_statistics         = TRUE
shared_pool_size         = 704643072
enqueue_resources        = 8000
control_files            = /oracle/P47/sapdata1/cntrl/cntrlP47.dbf, /oracle/P47/sapdata2/cntrl/cntrlP47.dbf, /oracle/P47/sapdata3/cntrl/cntrlP47.dbf
db_block_buffers         = 56033
db_block_checksum        = FALSE
db_block_size            = 8192
compatible               = 9.2.0
log_archive_start        = TRUE
log_archive_dest         = /oracle/P47/saparch/P47arch
log_buffer               = 1048576
log_checkpoint_interval = 0
db_files                 = 354
db_file_multiblock_read_count= 8
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks                = 2500
row_locking              = always
replication_dependency_tracking= FALSE
transactions_per_rollback_segment= 20
rollback_segments        = PRS_0, PRS_1, PRS_10, PRS_11, PRS_12, PRS_13, PRS_14, PRS_2, PRS_3, PRS_4, PRS_5, PRS_6, PRS_7, PRS_8, PRS_9
transaction_auditing     = FALSE
remote_os_authent        = TRUE
db_domain                = world
parallel_max_servers     = 20
hash_join_enabled        = FALSE
background_dump_dest     = /oracle/P47/saptrace/background
user_dump_dest           = /oracle/P47/saptrace/usertrace
core_dump_dest           = /oracle/P47/saptrace/background
optimizer_features_enable= 9.2.0
sort_area_size           = 2097152
sort_area_retained_size = 0
db_name                  = P47
open_cursors             = 800
optimizer_mode           = choose
btree_bitmap_plans     = FALSE
pushjoin_predicate     = FALSE
optimizer_index_cost_adj = 10
newinitial_join_orders = FALSE
optimpeek_user_binds   = FALSE
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Thu Dec 13 13:03:39 2007
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=8
ARC0: Archival started
ARC1 started with pid=9
Thu Dec 13 13:03:39 2007
ARCH: STARTING ARCH PROCESSES COMPLETE
Thu Dec 13 13:03:39 2007
ARC0: Thread not mounted
Thu Dec 13 13:03:39 2007
ARC1: Archival started
ARC1: Thread not mounted
rgds

Rapid install gettin error when create control file

hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
|      0% completed       ^M
/      0% completed       ^M
-      0% completed       ^M
\      0% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0

hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons

Problem while Creating Control files while Cloning the Oracle DB

Hi,
I am failrly new to Oracle Administration. I have got the task of cloning our Production database into a new machine. With the help of various articles found over the web I have followed the below mentioned steps
1)Executed the Alter database command for getting the control file copy.
2) Taken the Datafiles,Control and redo log files copies into the Target machine.
3) Copied the Pfile with the neccessary changes into the target machine.
4) Edited the Create Control file syntax (generated from step 1) and executed the same on the target machine.
Now the problem I face is that I get the following error while executing the create Control file syntax
a)ORA-01503 - Creation of Controlfile failed.
b) ORA-00219 - Required controlfile size 41760 exceeds max allowable size 20000.
I am really stuck. Both my machine configurations and O/S installed are the same.
Please advice me on how to Proceed... Thanking you all in advannce.
Rgds,
SN.

Hi Jaffer,
This is my code........ The control file has been generated by executing the syntax alter database backup controlfile to trace at the source db .
STARTUP NOMOUNT pfile=ORADATA:ORAHOME1\ADMIN\ORACLE\PFILE\INIT.ORA;
CREATE CONTROLFILE set DATABASE "ORACLE" RESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 16
MAXLOGHISTORY 65535
LOGFILE
GROUP 1 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG2ORCL.ORA' SIZE 200K,
GROUP 2 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG1ORCL.ORA' SIZE 200K
DATAFILE
'ORADATA:ORAHOME1\ORADATA\ORACLE\SYS1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\USR1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\RBS1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_DAT.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_LUB_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMBJ01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMAT01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BITPA01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BLUBFSINDEFX01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\TEMP01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_TOOLS.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\IMPORT1.DBF'
CHARACTER SET WE8ISO8859P1
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
#RECOVER DATABASE
# Database can now be opened normally.
#ALTER DATABASE OPEN;
# No tempfile entries found to add.
#

Problem in creating control files

Hi
I am using oracle 9i
I want to import the excel sheet data into the database.
Please let me know how to create the control file for sql loader.
For that i created control file using the following code
set echo off ver off feed off pages 0
accept tname prompt 'Enter Name of Table: '
accept dformat prompt 'Enter Format to Use for Date Columns: '
spool &tname..ctl
select 'LOAD DATA'|| chr (10) ||
'INFILE ''' || lower (table_name) || '.dat''' || chr (10) ||
'INTO TABLE '|| table_name || chr (10)||
'FIELDS TERMINATED BY '','''||chr (10)||
'TRAILING NULLCOLS' || chr (10) || '('
from user_tables
where table_name = upper ('&tname');
select decode (rownum, 1, ' ', ' , ') ||
rpad (column_name, 33, ' ') ||
decode (data_type,
'VARCHAR2', 'CHAR NULLIF ('||column_name||'=BLANKS)',
'FLOAT', 'DECIMAL EXTERNAL NULLIF('||column_name||'=BLANKS)',
'NUMBER', decode (data_precision, 0,
'INTEGER EXTERNAL NULLIF ('||column_name||
'=BLANKS)', decode (data_scale, 0,
'INTEGER EXTERNAL NULLIF ('||
column_name||'=BLANKS)',
'DECIMAL EXTERNAL NULLIF ('||
column_name||'=BLANKS)')),
'DATE', 'DATE "&dformat" NULLIF ('||column_name||'=BLANKS)', null)
from user_tab_columns
where table_name = upper ('&tname')
order by column_id;
select ')'
from dual;
spool off
and after then i have written in the commond prompt like
C:\sqlldr username/password@host controlfile
then it is giving like this
Commit point reached - logical record count 1
Any Help?
Thank you

What does it say in the .log file?
What records are in the .bad file?
How many records in the data file - if 1 then it's all good.
Excel often puts column headings in the .csv file - you may need to SKIP the first record (look it up in the docs).
Don't hard code the filename into the control file - it's easier to do that when you load:
sqlldr u/p control=controlfile data=datafileRead carefully what FLOAT and DECIMAL mean. Unless you are dealing with binary datatypes (you aren't) you probably don't need these. Only DATE needs careful treatment.
Also, consider pulling the data in using an external table (if it is on the Oracle server already). Again, look it up in the docs - you'll still have to get the control definition right...
Regards Nigel

Is it possible to create a file object from a resource?

Hi all
Is it possible to create a File from a resource call rather than from a path
e.g.
File myFile= new File("C:/j2sdk/sampledir/mypage.htm");is how im doing it now
how can i call it from a resource something like
File myFile= new File(this.getClass.getResource("mypage.htm"));

you may be right
im trying to load a file into a string then display that string
my resource thingy isnt working anyway :s
[code[
URI pTURI=null;
URI pBURI=null;
try
pTURI= new URI(this.getClass().getResource("/resources/prev_header.htm").toString());
pBURI= new URI(this.getClass().getResource("/resources/prev_fullpac.htm").toString());
catch(URISyntaxException e)
warnUser("URI Error");
File previewTop = new File(pTURI);
File previewBtm = new File(pBURI);
im getting this error
java.lang.NullPointerException
at cssCreator.cssCreator.setPreview(cssCreator.java:1263)
at cssCreator.cssCreator.<init>(cssCreator.java:48)
at cssCreator.cssCreator.main(cssCreator.java:1681)

Is it possible to create .ncd file without using MAX?

Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
Thank you

Hi,
the NI-CAN driver software does not provide functions/VIs to generate
*.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
look at the example.ncd file that gets installed with NI-CAN
(<ProgramFiles>\National Instruments\NI-CAN\):
<?xml version="1.0" encoding="UTF-8"?>
<nican_config version="0.1">
<saved>8/8/2005,17:58</saved>
<message name="TransmissionFluids">
<id extended="0">82</id>
<dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
<conflicts>0</conflicts>
<bytes>6</bytes>
<interface>1</interface>
<comment></comment>
<channel name="ClutchPressure">
    <conflicts>0</conflicts>
    <bitfield start="0" bits="8" order="0" type="1"/>
    <linear_scaling factor="1.600000e+001"
offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
default="0.000000e+000" unit="kPa"/>
    <comment></comment>
</channel>
</message>
</nican_config>
Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
-B2k

Is it possible to create controls dynamically.

Hai,
Is it possible to create control or arrays dynamically in LabVIEW.That means i want to create controls at run time depending on the dynamic data.
Please help me in this regard.

Ben wrote:
Christian's "Create Controls on the Fly"
Just for reference, Here's the original fly post. Makes it easier to find my old stuff.
(Of course there could be other interpretations of "on the fly": The 1971 album cover of "Sticky Fingers" but the Rolling stones comes to mind. )
LabVIEW Champion . Do more with less code and in less time .

12c Create Control File for Entire CDB (CDB-root + PDBs)

Hi,
In 12c, I understand that there is a single redo log and a single control file for an entire CDB. My question is what datafiles should I use to create control file for the entire CDB. According to Managing Control Files, I suppose I should use all the datafiles (the result of query from CDB-Root: select name from v$datafile), but in practice, the control file creation process can only be successful when I use CDB-Root databfiles. Thanks in advance for any advice.

The actual error message is duplicate tablespace (system, sysaux), but the root-CDB and PDBs should have separate system and sysaux. The following is the script I used.
CREATE CONTROLFILE REUSE DATABASE "CDB" RESETLOGS ARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 1024
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/cdbdata/cdb/redo01.log' SIZE 50M BLOCKSIZE 512,
GROUP 2 '/cdbdata/cdb/redo02.log' SIZE 50M BLOCKSIZE 512,
GROUP 3 '/cdbdata/cdb/redo03.log' SIZE 50M BLOCKSIZE 512
DATAFILE
'/cdbdata/cdb/system01.dbf',
'/cdbdata/cdb/sysaux01.dbf',
'/cdbdata/cdb/undotbs01.dbf',
'/cdbdata/cdb/pdbseed/system01.dbf',
'/cdbdata/cdb/users01.dbf',
'/cdbdata/cdb/pdbseed/sysaux01.dbf',
'/cdbdata/cdb/pdb1/system01.dbf',
'/cdbdata/cdb/pdb1/sysaux01.dbf',
'/cdbdata/cdb/pdb1/pdb1_users01.dbf'
CHARACTER SET WE8MSWIN1252

How to create Control file.

Being a new bie plz help me.
Can you let me know steps to create a new
control file. Create control file is always
giving error messages and if i have all data
and REDO logs intact how can i recover my
data base again using new control file
please help ....
null

hai,
for creating control file we proceed to ways:
1. create controle file using sql command as sys or system users
sql>alter database backup controlfile to trace;
system itself creates controlfile and keeps in udump directory.
2. using the old backup copies, edit the currect file locations, parameters manually.
Then run this script at nomount mode, to create the controlfile
murty
null

IS it possible to create control file in FAT32

Similar Messages

Maybe you are looking for