Is it Possible to Create Custom Report in SOLMAN

Hi Experts,
I am new to SOLMAN. I have one question. Is it Possible to create our own custom Reports in SOLMAN. If possible
tell me the variuos types of reports and how we can create.

Hi
SAP Solution Manager can be used for entire ALM so you need to clearly specify which area and what report you are talking about
http://www.sdn.sap.com/irj/sdn/alm-getting-started
General transaction code for reporting is
SOLAR_EVAL
it helps you to build the entire project report phase wise or for service desk or for charms or test management etc
check if that you are looking for.
regards
Prakhar

Similar Messages

Need help in creating custom reports

hello,
I am using EM 10.2.0.2 on windows 32-bit.
All EM components are installed on a single machine.
Have installed AGENT 10.1.0.5 for managing targets which are on LINUX 2.1
Please help me in getting the solution for the following queries:
(a)I need to create a custom report regarding the CAPACITY MANAGEMENT .
(b)I have some UDM defined but I am not able to use these UDM while creating custom report.
(c)Also is there any possibility that we can use views other than REPOSITORY VIEWS. What I meant was : instead of using REPOSITORY VIEWS can we use the tables of the target instances.
Thanks in advance.

Same post
Need help on repository views for creating custom capacity planning reports

Problem with creating customized report layout

Hello,
I want to create customized report layout. However, it doesn't work. Can somebody help me?
I have a page 24 in apex.oracle.com(workspace: houbcm, username: apex, password: apex1). Here is the code in my .xslt.
<?xml version="1.0"?>
<fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format">
<fo:layout-master-set>
<fo:simple-page-master master-name="content"
page-width="210mm" page-height="297mm">
<fo:region-body/>
</fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="content">
<fo:flow flow-name="xsl-region-body">
<fo:table table-layout="fixed" width="100%">
<fo:table-body>
<fo:table-row >
<fo:table-cell> <fo:block text-align='right' > <fo:inline> Product Name: </fo:inline> </fo:block> </fo:table-cell>
<fo:table-cell> <fo:block text-align='left' > <fo:inline> <xsl:value-of select='.//PRODUCT_NAME' /> </fo:inline> </fo:block> </fo:table-cell>
</fo:table-row>
<fo:table-row >
<fo:table-cell> <fo:block text-align='right' > <fo:inline> Description: </fo:inline> </fo:block> </fo:table-cell>
<fo:table-cell> <fo:block text-align='left' > <fo:inline> <xsl:value-of select='.//PRODUCT_DESCRIPTION' /> </fo:inline> </fo:block> </fo:table-cell>
</fo:table-row>
<fo:table-row >
<fo:table-cell> <fo:block text-align='right' > <fo:inline> Category: </fo:inline> </fo:block> </fo:table-cell>
<fo:table-cell> <fo:block text-align='left' > <fo:inline> <xsl:value-of select='.//CATEGORY' /> </fo:inline> </fo:block> </fo:table-cell>
</fo:table-row>
<fo:table-row >
<fo:table-cell> <fo:block text-align='right' > <fo:inline> Availability: </fo:inline> </fo:block> </fo:table-cell>
<fo:table-cell> <fo:block text-align='left' > <fo:inline> <xsl:value-of select='.//PRODUCT_AVAIL' /> </fo:inline> </fo:block> </fo:table-cell>
</fo:table-row>
<fo:table-row>
<fo:table-cell> <fo:block text-align='right' > <fo:inline> List Price: </fo:inline> </fo:block> </fo:table-cell>
<fo:table-cell> <fo:block text-align='left' > <fo:inline> <xsl:value-of select='.//LIST_PRICE' /> </fo:inline> </fo:block> </fo:table-cell>
</fo:table-row>
</fo:table-body>
</fo:table>
</fo:flow>
</fo:page-sequence>
</fo:root>
Thanks,
Jen

Hi,
Thanks for the reply. I have created following report definition.
SELECT Call_Type.EnterpriseName, Call_Type.Description AS DNIS, Call_Type_Interval.CallTypeID,
SUM(Call_Type_Interval.ServiceLevelCallsOffered) AS CallsOffered,
SUM(Call_Type_Interval.CallsAnswered) AS CallsAnswered,
SUM(Call_Type_Interval.TotalCallsAband) AS TotalCallsAband,
SUM(Call_Type_Interval.ServiceLevelAband) AS ServiceLevelAband,
SUM(Call_Type_Interval.ShortCalls) AS ShortCalls,
SUM(Call_Type_Interval.CallDelayAbandTime) AS CallDelayAbandTime,
SUM(Call_Type_Interval.AnswerWaitTime) AS AnswerWaitTime,
SUM(Call_Type_Interval.AnsInterval1) AS AnsInterval1,
SUM(Call_Type_Interval.AnsInterval2) AS AnsInterval2,
SUM(Call_Type_Interval.AnsInterval3) AS AnsInterval3,
SUM(Call_Type_Interval.AnsInterval4) AS AnsInterval4,
SUM(Call_Type_Interval.AnsInterval5) AS AnsInterval5,
SUM(Call_Type_Interval.AnsInterval6) AS AnsInterval6,
SUM(Call_Type_Interval.AnsInterval7) AS AnsInterval7,
SUM(Call_Type_Interval.AnsInterval8) AS AnsInterval8,
SUM(Call_Type_Interval.AnsInterval9) AS AnsInterval9,
SUM(Call_Type_Interval.AnsInterval10) AS AnsInterval10
FROM
Call_Type (nolock),
Call_Type_Interval (nolock)
WHERE Call_Type.CallTypeID = Call_Type_Interval.CallTypeID
AND Call_Type.CallTypeID in (:calltype_list)
AND Call_Type_Interval.DateTime >= :start_date
AND Call_Type_Interval.DateTime <= :end_date
GROUP BY Call_Type.EnterpriseName,
Call_Type.Description,
Call_Type_Interval.CallTypeID
For this definition i wanted to create a customized report which is apparently not possible.

Creating custom reports with Pie Chart

Hello,
I've got a little problem while I'm creating custom reports with SQL Chart.
For example, I want to have a Pie Chart that represent the distribution of the version for a software, i wrote my query with no problem, the result is in good format.
My Pie Chart is fine except there are no percentage displayed. The legend on the right is fine with correct count of different version, but no percentage on the pie chart.
Any idea?
Thanks in advance,
Fab

Hello,
well, I think this is not possible to ask OEM to print the percentage over the chart.
Anyway, I sugget you to rewrite your query to compute the % in the query itselft thus to have the pct displayed on the rigth.
Let's say you want to display the database files' size with such a query: select file_name name,bytes val from dba_data_files;
This is the way to display the % of each file size over the total (remark the above query has been embeded in the new one).
select name,ratio_to_report(val) over() pct
from ( select file_name name,bytes val from dba_data_files )
order by val desc
It is quite easy to adapt such a tip to your own query.
Regards,
Noel Talard

Restrict User to Create Custom Reports

Hi
Can we restrict a user from creating custom reports in SPM, If yes how? We want that user can does not see the Create New Report Option
Regards
Neel

HI,
If the dashboars and reports for users are already so well defined, wouldn't offline Briefing Books give them the same information?
Also, if ad-hoc reporting and business user empowerment is not what you are looking for, it would also be easy to use SAP BusinessObjects BI tools, such as Xcelsius, on top of SPM data to provide those centrally defined dashboards and reports.
Finally, BW authorizations are very flexible and comprehensive. You can limit a user to a few dimensions on which he can drill down, to certain Key-Figures, to specific levels of the hierarchy. If you don't have such authorizations in place and want to control instead the selections the user can do, then using Xcelsius on top of SPM could give you that possibility.
Regards!
Ricardo Vieira

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

Want to create custom report under report field in OEM 11G

Dear all
I would like to create custom report on OEM 11G. I have query which is executed and verified from TOAD. But after placed report element it shows an error that table/view not exits. But it doesn't ask any database user name and password.So let me like to know how to do this. I want add more and more reports after the success of this.. Ho can it be done?Please advice.
Note:-
The data is getting from OEM repository i think so.. But i need a report which is get data from various apps and system tables. So how to display result from this table and shown to EBS reports.
Regards,
Gobinath.R
Associate consultant
Petrofac Information Services Private Limited
Chennai.
Edited by: Gopinath on May 18, 2012 4:23 AM

Report should be based on tables in repository database. Mostly sysman tables we will be using for reporting. If you need other database tables then you need to create dblink to those targets in sysman schemas. To my knowledge that's the only way you can refer to other db tables in reports.
Regards,
Satheesh Shanmugam

How to create custom report in crm 2013

Hi,
I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
is an example of display record

Hi Aamir,
Have a look at below link it shows step by step how to create custom SSRS report.
http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

How to create custom report plugin using child region report metadata

Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?

Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                     P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                     P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
    VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
    VCOLCOUNT       NUMBER;
    VCOLNAMES       VARCHAR2(2000);
    VAJAXIDENTIFIER VARCHAR2(100);
    VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
    VJSCODE         VARCHAR2(32767);
BEGIN
    VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
                                                    P_MIN_COLUMNS    => 1,
                                                    P_MAX_COLUMNS    => 999,
                                                    P_COMPONENT_NAME => P_REGION.ID);
    VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
    FOR I IN 1 .. VCOLCOUNT LOOP
      VCOLNAMES := VCOLNAMES || '{name: "' ||
                   UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
    END LOOP;
    APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
    RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
    WHEN OTHERS THEN
      APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
      RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala

Is it possible to create custom buttons in CRM Ondemand?

Hi,
Is it possible to create custom buttons in CRM Ondemand in any detail page like the inbuilt buttons like 'New', 'Delete' etc? If possible then how?
Thanks
Arpita

You can add a button using custom javascript. but this could potentially have performance issues. please test the performance and functionality if you implement a lot javascript
see this link : http://helponmyproject.com/TTOCOD/
Regards,
Royston

Best way to create custom reports

Good Afternoon,
I am completely new to UCCX 9 and Crystal reports, so double newbie. I have been attempting to create customs reports that will not be run by the Historical Reports. I've used the Historical Reporting Admin and Dev Guide along with the DB Schema pdfs, to no avail. Is there a better option? I've seen that the DB can be accessed via SQL applications. The reports that have been requested are rather complex (IMO),
Number of calls accepted and abandoned, with available (Ready and Not Ready) Agents per hour vs scheduledI've been able to create this with two different reports
Calls taken by Agent by hour and status through out the day including times spent in different Ready Codes, Talk times, hold times, etc.
Essentially, can any one guide me to a better resource or option? I appreciate the help. Thank you.
- Jose

Hi,
there's a number of solutions available, you may wish to browse the Solutions Catalog.
Alternatively, you can build your own - there's a number of free and commercial solutions available. Personally, I prefer BIRT.
G.

How to create custom reports.

Hi ,
Could you please let us know how to create custom reports which are data based and not analytics. Which is the best method , is it to devlop reports in sites or integrate with OBIEE reports. could you please let us know the best practices for this approach.
Thank you,
Sashank P.

Hi Jiri ,
Thanks a lot for your support. Below are my answers for the request:
1) what data you want to report on? Is it data from a database? file system? Web service outputs?
Ans : The Data would be mostly from Database only.
2) what is the overall purpose of your solution?
Ans: The overall purpose of this solution is to generate reports with sorting capability and should be able to export in different format documents.
3) what is your architecture?
Ans :
4) why Sites?
Ans: The customers login into our site and can be able to view the different reports and the present site is already a webcenter site. and the reporting capability is an enhancement .
Can you please provide the right approach here. We have an option of using ADF or even we can use Webcenter Portals. So which would be the best approach to go. And can you please guide us any approach or examples for integrating Webcenter Portals and Sites and even integrating ADf with Sites.
Thank you,
Sashank P.

Is it possible to create a Report Object in a menu?

Hi all,
I 'm working on an oracle report wherein the user will not give any parameter.
They would like to view the report by clicking on the menu option for this report and it should then open the report in an new browser window
in pdf format.
My question:
Is it possible to create a report object in the menu?how can we do this?
I'm working on Oracle reports version Report Builder 10.1.2.0.2
TIA

Thanks for your prompt reply.
Through form I'm able to create report object and report is displayed successfully.
I'm using the following code:
DECLARE
          report_id Report_Object;
          ReportServerJob VARCHAR2(100);
          rep_status VARCHAR2(50);
BEGIN
          report_id:= find_report_object('Report1');
          SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'vouno='||:vouno||' paramform=no');
          ReportServerJob:=run_report_object(report_id);
          rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
          LOOP
                    rep_status := report_object_status(ReportServerJob);
          END LOOP;
          IF rep_status = 'FINISHED' THEN
          WEB.SHOW_DOCUMENT('http://sushma:8889/reports/rwservlet/getjobid'||
          substr(ReportServerJob,instr(ReportServerJob,'_',-1)+1)||'?'||'server=rep_sushma','_blank');
          ELSE
                    message('Error when running report');
          END IF;
END;
I'm not able to use the same code in Menu, as there is no way to create report object "Report1"
Or is there any was to create object.
So in place of report_id:= find_report_object('Report1');
I used report_id:= find_report_object('c:\.... *.RDF');

Is it possible to create dynamic reports using iReports in netbeans ?

Hi
I want to know that is it possible to create dynamic reports using netbeans? Dynamic reports means based on user selection(for eg. say by selecting values from combo boxes) some query will be genatated and fetch the query result from data base and displayed results in iReports only my problem is i am working on Netbeans IDE and i have installed iReports as plugins in netbeans IDE. and i am not able to find any tutorial that show me how to work with iReports under netbeans IDE. and how to create dynamic reports in iReports. If u know any such tutorial then can you send me link plz...!
Thanks

What do you mean by "in Start Menu"? Do you mean Live tile? See https://msdn.microsoft.com/en-us/library/windows/apps/hh465403.aspx
https://msdn.microsoft.com/en-us/library/windows/apps/dn468032.aspx
Best Regards,
Please remember to mark the replies as answers if they help

How to create customer report class

Hi all,
As per my requirement i have to create customer report class.
can u plz give ur suggestions regarding this.
Regards
Rama.

Bala this is my question.
Use the IMG to create a customer report class 000000## (where nn = group number) for the logical database PNP. Sorting and matchcodes are permitted and the start and end dates are permitted entries for both the data selection period and the person selection period.
Select the following fields for the first page of the SELECT-OPTIONS:
u2022 Personnel number
u2022 Employment status
u2022 Company code
u2022 Personnel subareas
u2022 Employee group
u2022 Employee subgroup
u2022 Cost center
1-2 Assign the new report class to your report.
Regards
Rama.

Is it Possible to Create Custom Report in SOLMAN

Similar Messages

Maybe you are looking for