Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

Similar Messages

  • I am having problems with saving frames in compressor 4.0 from final cut pro x?

    i get the following error message:
    The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
    thanks

    hi Russ,
    i was trying to export a sequence of frames into compressor.
    since then i applied an update to FCP 10.0 and it is now working.
    thanks.
    Wasim.

  • When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
    Does it play in your Mac?
    What brand of disks are you using?
    Russ

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
    Erin

    The best and only format is mpeg2/m2v.
    The encoding rate for video is based on the length of the sequence in h/m/s.
    They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
    Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

  • Creating FLVs from Final Cut Pro

    I am trying to create an FLV from Final Cut Pro 5.1.4 on an
    Intel Mac. I have intalled the exporter plugin but it does not show
    up as an export option in FCP. Does anyone know why this is
    happening? Do they not yet have an FLV exporter for FInal Cut Pro
    5?
    I am stumped any help would be greatly appreciated.

    The only way I could make it work was to open FCP using
    Rosetta. This opens the program as if it were running on an older
    (non Intel) MAC. The plugin should then show up where it is
    supposed to. I guess they haven't come up with an Intel MAC plugin
    yet.
    To open as a Rossetta program control click on the FCP icon
    and click on Get Info. Then click on the Open using Rosetta
    box.

  • Dvd burned from final cut pro hackes when viewed on Bose dvdplayer

    When I burn a DVD from final cut pro x (disc creator) on my MAC book pro,(MAC IOS lion 10.7.5) it can be viewed on my computer without problems, but hackes when viewede on my Bose dvd player, even though it works fine with purchased dvds. What is the problem?

    Brand of DVD media can cause this.  Not all DVD players will work with all self-burned DVDs.  They are flimsy soft plastic and prone to errors.  This is not an FCPX issue, but simply a self-burned DVD issue.  Try a different brand of DVD media.

  • How do I burn BLU-RAY DVDS from my iMacs?

    I own a video production company and we can burn dvds in compressor, but we can't figure out how to setup a menu with multiple tracks to select different options.  Like a menu page.  Does anyone know how to do this on a Mac or by using an optional software? 
    A couple times compressor has gave us errors on burning a normal mov clip to Blu Ray, so if you recomeend or know any other softwares or even if I have to purchase a PC just to burn Blu Ray DVD's, can you please help me.

    Does anyone know how to do this on a Mac or by using an optional software?
    I do this using iDVD which is no longer available from Apple, but still available as part of iLife 09 and 11 versions from online vendors. You can either use Chapters or (my preference) simply import your videos as separate movies which will then show up as separate entities in the menu (and selectable separately).
    FWIW, Macs do not support burning or playing blu-ray without additional software (and a blu-ray burner) -  Roxio Toast is one that will work.

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • Is it possible to share documents from Final cut pro x on my other mac?

    is it possible to share documents from Final cut pro x on my other mac?

    Yes, use SugarSync, multiple users can open the file at the same time if required.

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

  • Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

    I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
    Have tried with Cyberlink removed from machine.... same problem. 
    Any suggestions??

    The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
    I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size.  It was set-up with simple "Play menu".  It burns up to the point of finalization, then the above error message occurs.
    I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message.  Also tried different brand of discs.
    I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud.   CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
    It seems to be a problem with the Creative Cloud installation on the first computer???

  • Export to Blu-ray from Final Cut Pro 7 with LG BE12LU30 External Blu-ray

    Hi all
    I've got an iMac with Snow Leopard and I'm editing HD video in Final Cut Pro 7. I've created AVCHD discs on DVD to play in my Blu-ray player but now I want to create Blu-rays that will play in a regular Blu-ray player.
    Has anyone got any experience of using the LG BE12LU30 External Blu-ray Re-Writer with FCP 7? I've checked other posts and it seems one user has had success with an earlier LG Model.
    Basically if I connect this drive and use the Final Cut Blu-ray export option in share, will I be able to burn a playable Blu-ray?
    Any help would be much appreciated!

    Hi I have one of those drives too .. I use FCP to edit export the movie using 'current settings' and then import that movie Compressor .. alternative I also have Toast with the Blu-Ray plugin .. it gives a nice menu template and works well. http://www.roxio.com/enu/products/toast/plugin/overview.html

  • I can't burn a normal dvd from final cut pro.Help would be much appreciated!

    Hi.I am having great difficulty burning my final cut pro project to dvd.It is shot in HD and I have compressed it but when I burn a dvd it will not play in a normal/standalone dvd player.Could someone please tell me how to burn my project to dvd.Can HD film be burned to a normal dvd?The final cut pro file is only 1.3 GB.Any help/advice is much appreciated.Thank you.

    >Could you please tell me what the best settings to use when compressing to quicktime or if infact it has to be done at all?
    Matt has already told you twice; his first response (above) gave you step-by-step instruction.
    I'll spell it out for you again but with slightly more detail:
    1. In FCP, render the Sequence fully, then go to File->Export->QuickTime Movie.  (do NOT use "Using QuickTime Conversion).  In the export window, do NOT Recompress All Frames.  You can chose to make the movie self-contained or not.
    2. Use the resulting file in Compressor, where you will chose a DVD preset appropriate for your video's duration.  If needed, you can duplicate then modify any preset to better suit your needs.  Compressor will create two files; an MPEG-2 video file (.m2v) and a Dolby Digital audio file (.ac3).
    3.  Use the two files created by Compressor in DVD Studio Pro to author and burn a DVD.  Do NOT author an HD DVD as these will not play in DVD players.
    -DH

  • Burning a DVD from Final Cut Pro X via Compressor - No audio?

    I have attempted to burn a DVD from a Final Cut Pro X project using Compressor, however the result was silent. 
    I used compressor because my FCPx project is in NTSC and my DVD is for air on Australian TV (PAL).
    Image seemed to burn OK however there is no audio.  Can anyone advise what I may have overlooked?
    This is the first time I have used Compressor, and I am fairly new to FCP X.
    thanks,
    Geoff

    Thanks Russ.  OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file.  Seems to make sense.
    To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me.  No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
    Type:  Final Cut Pro.app  (shouldn't this be a reference to the rendered file/s?)
    Video - showing the same dimensions of my FCPx Project file (NTSC  ..640 x 480)  instead of the MPEG-2 (Pal ...720 x 576).
    Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
    My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
    Thanks,
    Geoff

Maybe you are looking for