Is it possible to create group above report between to different data model

Hi,
I am having one problem.. I am working on Bi publisher 10...
I have to create 2 different data models.. which i have done successfully.... its showing xml data perfectly.. but my problem is i want my 2nd data model to be dependent of 1st model...
when i am designing my template ... i am not able to create a group by report..
i want my report like this ...
------------------------------------------------------------ (fetching data from first data model)
abc xyz pqrs
--------------------------------now their it must show the data from second data model... dependent on first model...
simply i want to know is it possible to create group above report between to different data models..

Thanks for your response..
I already tried this.. But its not working ..
i want parent information from data model 1
then all detail information related to parent template ...from data model 2..
but its not working.. its giving me all parent informations first then all details informations..

Similar Messages

Break Column in Group Above Report - Causing Error in Data Groupings

Since I'm required to designate at least one Break Column in my Group Above report, I created a dummy column in my SELECT statement. I did this so that I could designate the required minimum of at least one break column, but I designated one that won't have any impact on how the report is ordered, because it will be the same value (NULL) for every record. So, my SELECT statement starts out looking something like this:
SELECT
NULL break_column,
column_1 column1_name,
column_2 column2_name,
column_3 column3_name,
column_4 column4_name,
column_5 column5_name
I needed for the break column to have no impact on the ordering of the report because I need for the ORDER BY clause to completely control how the report is sorted, w/o any interference by a hard-coded break column. I need this because my intention is to make the ORDER BY clause dynamic, and a hard-coded break column with actual data would supercede the ORDER BY clause, thereby making it static.
Everything is working correctly with regard to how the report is sorting the records designated as group columns; however, the detail columns are getting all messed up as far as what main record they're grouped under.
By this I mean that when I designate only one break column, some details may display under the wrong group, where they're not supposed to. For example, each page consists of demographic info. about a specific record on a table, and the details listed under it should be the individual comments that have been made on that record. The issue I'm seeing is that for some records, it's showing comments from not only the record for that group, but it continues to list out comments made for other requests as well, when those comments should be displayed under their own respective records.
Why is this happening when I designate only one break column, and how can I keep it from doing this?

Did you get a solution for this?
I have the same problem.
Any help would be appreciated.
Thanks,
Madhu

Create groups in reporting services for security?

Is it possible to create groups within reporting services and assign folder/report access to those groups?
sqlserver 2008r2
winserver 2008r2

Hi,
You can create active directory groups and assign these groups in SSRS security for folder/report access
Jiri Neoral

How to create a Group Above report using APEX

I want to create a Group above report with more that one group using APEX. Is it possible to generate such a report using APEX. If so kindly let me know how to go about creating a Group above report with more than one group.

Hello Srini,
Thank you very much for the reply but I'm not into OBIEE... I want the required query to be processed and the output to be shown in xml layout to load into RTF document. The rest I can manage.. but please let me know how to get the .xml output with out using the report builder or the apps environment(concurrent prg submission)..
Please let me know if any... urgent
Thanks in advance
Krishna

Multi-query group above report creates more pages

Hi,
I have a multi-query group above report (paper only), the parent group creates 5 rows(subframes) all onto the same page, but then creates 4 more IDENTICAL pages!!?
at the end I have 5 repating frames and 5 pages.
If I set Maximum Records per Page to 1, I have 5 pages (IDENTICAL) with the first frame only...
any idea?
cheers
Matteo

hello,
you will have to create a counter, that tells you the numbers of students (summary-column, function : count, reset on : course) and create a format-trigger on the heading that hides it when the number of students is 0.
regards,
the oracle reports team --pw

How to display different text for labels in Group Above Report Oracle Repor

Hello,
Is there a way to change the text that is displayed in Labels in a Group Above Report? For example, I have a Group Above report with my columns of data and above the columns I have my column labels, but I would like to be able to display various text, i.e. different labels based on condition. In other words, Column1 label could say Column 1 or This is Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
Thank you.

968277 wrote:
I'm thinking it is possible with a Format Trigger, but I've only ever returned (TRUE) or (FALSE). I am very new to Oracle Reports Builder. Thanks.Hi,
Yes it's possible. and your are in the right place. use this true and false. For example
/*true means display, false means don't display */
if your_criteria_or_condition is ok then
return (TRUE);
else
return (FALSE);
end if;create as many label as your need and control with the code..
Hope this works..
Hamid
Mark correct/helpful to help others to get right answer(s).*

Multi level Group Above Report

I have a multi level Group Above report like this.
School name : xxxx
Course1
Student1
Student2
Course2
Student1
School name : yyyy
etc...
No students are enrolled in some of the courses. I used the Outer Query in SQL to include those courses. Everything looks okay, except the header for the students are still appearing. how do I supress the student heading if no drecords are present?
Can somebody help me.
Thank you
David Smith

hello,
you will have to create a counter, that tells you the numbers of students (summary-column, function : count, reset on : course) and create a format-trigger on the heading that hides it when the number of students is 0.
regards,
the oracle reports team --pw

Group above report problem

hi,
To get clear idea i am using emp table as an example.
I am creating a report using style GroupAbove and save it in .jsp file.
I took empno as group .
My report was displayed in this way:
page 1:
empno 7369
ename job sal comm deptno
simth clerk 800 0 20
empno 7499
ename job sal comm deptno
allen sales 1600 30 30
ramu manager 4000 0 20
and so on...
page2 :
empno 7499
ename job sal comm deptno
raju clerk 500 0 10
empno 7599
ename job sal comm deptno
ramu worker 300 0 40
..... so on
But My result should be in this way :
page 1:
empno 7369
ename job sal comm deptno
simth clerk 800 0 20
empno 7499(problem :Here i dont want to display heading of ename.... and so on)
allen sales 1600 30 30
ramu manager 4000 0 20
page 2:(if next page starts then should start with heading of ename... and so on)
ename job sal comm deptno
raju clerk 500 0 10
empno 7599
ramu worker 300 0 40
..... so on
If any one know this probelm help me soon
it's very urgent
with regard's
vijay

You may have been better to use deptno as the group column in your example, since I'm not sure that grouping on empno makes sense (and hence makes the example difficult to picture).
That said, it seems that the problem is that you only want the details headings to be displayed once per page (for a group above report). This isn't going to be too easy, and will require some coding, but bear with me.
The first thing to do is to create a PL/SQL package with a single boolean variable in it. This will be used a flag to determine whether the headers should be displayed.
In the before report trigger, set this variable to TRUE.
In the format trigger for the frame containing all the boilerplate labels, check to see if the variable is TRUE. If it is then set it to FALSE, and return TRUE.
If it's not then return FALSE (to suppress the display).
In the between pages trigger set the variable to TRUE.
Hope this helps (and that I've understood the problem),
Danny

Group above report - help please

Good Morning,
I'm trying to create a group above report that resembles the following:
LETTER TYPE: 00001
BATCH TOTAL NOREPLY
1234 3 1
2345 2 0
TOTAL VOL. FOR LETTER 00001 5
I've tried using:
select ltrtype, batch, count(reply)
from ltr
where reply = 'N'
group by ltrtype, batch
which does give me the correct figures under the NOREPLY Heading, but I can't get the correct figures for the TOTAL heading (NOTE: The figures in the TOTAL column should be a total of both the reply = 'Y' and reply = 'N' for the ltrtype and batch - the figures in the NOREPLY column should be a total of only the reply = 'N' for the ltrtype and batch.) I hope this explanation is clear
I've also tried eliminating the where clause, but then I get the correct figures under the TOTAL heading, but I can't get the correct figures for the NOREPLY heading.
I've also tried using two queries and a data link, but I couldn't get that to work either.
Any help would be greatly appreciated.
Thanks.

Go to report wizard and check the groups and fields tabs. Otherwise map the repeating frames accordingly.

How to develop a group above report in mailing lable style

i want to know the method to develop a group above report (multi level groups) in mailing lable style like yellow pages on reports 6i e.g.
group 1: country
group 2: province
group 3: Industry
group 4: product or service
mailing lable: Company Name
Address
Contact No
I will highly appreciate if someone can help in this regard
M. Imran Shahzad
[email protected]

Post Author: V361
CA Forum: Formula
I am slightly confused, but perhaps you can create a formula
Then group on the formula. If this is not what you want, could you post some sample data, with the desired results.

Supress repeated labels in group Above reports o matrix group above reports

Hi,
I have a problem, because I´m brand new in reports.
I've defined same reports.
When I defined a Group Above Report or a Matrix with Group Above Report the labels appear repeated in the same page:
Year 2006
Level 1 Range 1-3 months 3-6 months 6-12 months
Age
< 16 1
16-17 1 3
18-24 12 6 2
25 4 5 2Total Level 1: 17 14 5
Level 2 Range 1-3 months 3-6 months 6-12 months
Age
< 16 1
16-17 2 1
18-24 8 12 2
25 5 4 3Total Level 1: 15 17 6
Is it possible not to repeat the labels "Range 1-3 months 3-6 months 6-12 months",? I want them to appear once per page.
How can I do it?
Please may anyone help me?
thanks
Beatriz

Why should that be a bug? You have a custom requirement and have to find a way to fulfill it. But, what is your actual sorting order? Do you have only this three departments? If so, you could add an addtional column in your query like
DECODE(DEPT, 20, 1, 10, 2, 30, 3, 4) SORTINGput that column in the same group as dept and sort after that new column.

Urgent- Group Above Report

Hi,
I am facing problem in Group Above report this can be said in the schema of Scott as follows.
I have developed group above report on Dept,Emp tables. It is showing all the data but the deptno =40 is not showing. The query used is
select * from emp,dept
where dept.deptno=emp.deptno(+)
There I have also used formula column to calculate total salary for each department in front of each department. I case of dept no =40 it is also showing blank

Hi Riaz
The 'emp' table does not have employees in dept 40.
Regards
Sripathy

Is it possible to create a generic report that accepts the SQL as a param

Is it possible to create a generic report that accepts the FULL sql statement as a paramater and returns variable results based on this?
We have a requirement to have a generic export routine to spit out csv's from clicking on a web page hyperlink, which would need to accept a "new" sql statement for every run, each containing different columsn etc that would be needed in the output.
I was hoping could have a generic Oracle report, exporting delimited data format (and as such not using a layout) and somehow pass in the "new" sql statement as a parameter at run time - each sql statement would be different with different columns etc.
Is this possible with oracle reports ?
thanks

If you need a simple dump of data you could try writing a report with a simple query such as
select 'Report title or column headers'
from dual
&data_query
then your &data_query parameter could be
union select col1||','||col2 from data_table
If you are outputing a comma separated data dump the you can concatenate together your data into a single text field.
This would allow you to have a simple heading followed by the actual data. I guess you could extend this so that the 'Report title or column headers' from the first query was also a parameter to output your row headings i.e.
select :column_headings_text
from dual
&data_query
Give it a go and good luck

Is It Possible to create multiple tab report in OBIEE 11g?

Is It Possible to create multiple tab report in OBIEE 11g?

Triple post even! Multiple tabs in a single OBIEE & https://forums.oracle.com/thread/2560266
Stick to one post!

Display Total in Group Above Report

Hello,
I have a group above report with month, product_id, product_name as group above fields I have product_entry_date, description, total_qty, actual_qty etc as display fields in my report.
I would like to have a total and grand total for total_qty and actual_qty for product_id and product_name. Issue I am having is when I add a summary column for total_ qty and actual_qty, total is getting displayed for each month.
How can I display total and grand for total_qty and actual_qty?
Any help is highly appreciable.
Thanks

ponic wrote:
Hello,
I have a group above report with month, product_id, product_name as group above fields I have product_entry_date, description, total_qty, actual_qty etc as display fields in my report.
I would like to have a total and grand total for total_qty and actual_qty for product_id and product_name. Issue I am having is when I add a summary column for total_ qty and actual_qty, total is getting displayed for each month.
How can I display total and grand for total_qty and actual_qty?
Any help is highly appreciable.
ThanksIf you want to display total qty for each month and you already done it. as you says..
total is getting displayed for each month.If not ,
Take a summary column at month group >> at properties .. Summary Function : Sum , Reset at month group.
and for grand total
take a summary column outside the query. >> at properties .. Summary Function : Sum , Reset at report.
Hope it works.
hamid
If someone's response is helpful or correct, please mark it accordingly.

Is it possible to create group above report between to different data model

Similar Messages

Maybe you are looking for