Is it possible to create multiple LDAP server in the same bi11g application

Hi,
they are 8 location users are acessing my report.now i am trying to implementing LDAP server for the user security in my obiee11g application. is it possible to configure/implement multiple LDAP server in the same BI server.
Thanks
Deva

YES. refer http://total-bi.com/2011/07/multiple-ldap-authentication-providers-in-obiee-11-1-1-5/

Similar Messages

How to configura multiple ldap server to the sun access manager

Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
Mouli

There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard

Is it possible to create a Clone database with the same name of source db ?

Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

Is it possible to have multiple time machines on the same password protected network?

is it possible to have multiple time machines on the same password protected network? any insight would be helpful thanks

Youshould set one of them up to extend the wireless network. That one would not need an Ethernet connection and would allow your network to cover a broader area.

Creating multiple library records for the same song

Is it possible to create multiple entries in the itunes library for a single file, each with different metadata? I have a number of songs which appear on several albums each. I would like to be able to see complete track lists for these albums, but I don't want to uselessly fill up disk space with duplicate files.

I do not think so. The way the music lib XML is setup there is one single reference to a file, and multiple play lists can point to that reference. How may of these files do you have?

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

Creating Multiple iPhoto ibraries on the same hard disk/same folder

Is this possible? Since iPhoto does not support multiple events inside an event, is there a way to create multiple libraries on smae disk and in the same picture folder? I want to separate some pictures into several libraries, but I want them to be on the same external HDD and in the same folder - how do I do this? How do I create another/separate library? Thanks!

Easy. Hold down the option (or alt) key and launch iPhoto. Choose 'Create library'. IF you're going to have them in the same folder be sure to give them distinctive names.
Since iPhoto does not support multiple events inside an event, is there a way to create multiple libraries on smae disk and in the same picture folder?
It's just curiosity, but how does this a: make up for the fact that you cannot nest Events? and b: Won't Albums (and folders of Albums) create the same in a single library - especially as you can only have one library open at a time?
Regards
TD

How to create multiple Purchase Order using the same document number?

HI Friends,
I m in a product which extracts data from SAP and stored in Access database.
For that,while i extracting Purchase Order from the Demo Database (SBODemo_US)for OEC Computers,the same DocNum is used for several Purchase Order using Index Line numbers.
eg:
DocNum for Purchase Order1 -->3000   0 (Index)
DocNum for Purchase Order2 -->3000   1 (Index)
    But i can't create multiple Purchase Order using same DocNum manually in SAP B1,Could anybody please help me <b>to create a Purchase Order using same DocumentNumber?</b>
Thanks in Advance
SooriyaKala.P

Hi,
The problem statement is not quite clear to me.
As far as I understand your statement, I think you want to club multiple orders into one purchase order using the index incrementally.
For this I think once you have created the first purchase order, open the purchase order in edit mode the second time and append the new line items.
If I am getting you wrong please explain the problem statement in more detail.
Regards,
Rara.

Possible to have multiple cluster members in the same JVM (for unit tests)?

Hi,
I'm wondering if it's possible to simulate multiple cluster members inside of a single JVM. I'm looking to unit test my code and it would be great to write cases for various boundary conditions.
This could certainly be done with multiple JVMs but would be more difficult to run in something like cruise control etc.
TIA,
Danny

Hi Danny,
I do not know how to accomplish what you are asking for and run several Coherence nodes in a single JVM, but I have written a JUnit base class that starts a configurable number of nodes (each in its own JVM) and provides some other useful methods for unit/integration testing with Coherence, such as method to clear all caches or to load test data from the CSV file.
It is still a work in progress and you might need to tweak things a bit to make it work in your environment, but it will at least give you a head start.
Shoot me an email if you are interested and I'll send it to you (you can find my email in my profile).
Regards,
Aleks

Creating multiple tab reports using the same query in Web intelligence

Hi All,
I have created a Universe on a BW Query which has fields as below
AGE Depaatment Gender Grade
25       FIN                M            A
27       LES               F            A+
60       SWS            M             A++
Based on this data i have created a WEbi report which shows all of these data under one tab.
Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
Similarly i create two more new report tabs.
in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
2nd report contains only finance data, third contains only Les data and fourth only SWs Data.
Is it possible to create this report using the same query?
Regards,
Raj.

You should use report filters, not query filters.
A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
This is a fairly confusing bit for folks that are new to Web Intelligence.

Is it possible to create two multicast DR on the same subnet?

on server vlan 10.24.254.0/24, there are two routers:
R1 is .2 and R2 is .3 with "IP pim sparse-mode" enabled.
R1 and R2 are on two distinct Mcast domains
R1 has
ip pim rp-address 10.25.249.1 acl-one override
R2 has
ip pim rp-address 192.168.2.1 acl-two override
The problem is R2 with higher IP address is now the IGMP and PIM DR. Any multicast app with RP 10.25.249.1 is NOT working because R1 can't receive IGMP join from servers.
In addition, R1 by design can not reach 192.168.2.1 and same for R2 to reach 10.25.249.1
Thus configuring two "IP PIM rp-address" is not possible
how can I make R1 the DR for group IP under acl-one and R2 for group IP acl-two?
or I have to change network topology?

There can be only one DR on a the same subnet.If there are more than one DR on the same subnet it would endup sending duplicate multicast traffic for connected host.For more information refer the URL
http://www.cisco.com/en/US/products/ps5763/products_configuration_guide_chapter09186a0080312878.html#wp1091449

Is it possible to create different font styles within the same text field?

The form I am creating is getting really complex because when different fields require different font treatments (bold, italic, different font size, different font) I have to create a seperate text box and get it to align with the others. This wouldn't be an issue in most cases but this form is really detailed and has many text boxes. Before I stuggle too much longer on it, I thought I would check and see if there is a way to make them all in the same text field. If not, perhaps I am trying to use Acrobat for something it is not meant for. Any recommendations on other programs I could use? Thanks

Thank you try76. I'm not sure if I did it correctly. As soon as I tick the Rich Text Formatting box it automatically changes the appearance of the text in the field (Helvetica Light to something like Helvetica Heavy) I can't seem to get the font back to Helvetica light or change the font size while the Rich Text Formatting box is ticked.

Creating multiple CUP initiators with the same role (sharing roles)

Has anyone built a CUP workflow where roles are shared across different workflows/paths/initiators?
We have a situation where the users have several roles that are in multiple SAP applications and they want the requests for these roles to go down different workflows based on which application they were requested for.
For example, if role A is requested for application X1, the request should go down workflow A1. But if the role is requested for application Z1, the request should go down workflow B1 instead.
I've tried using two initiators that have both role and application (role A AND application X1, role A AND application Z1). This works fine as long as only one application/role is put in per request. It sends it down the appropriate workflow, A1 or B1, based on the application and role.
However, if I try to build a request with two entries, one for each role/application combination, I get that "multiple initiators" error message.
I guess technically multiple initiators are found for the request overall, but each role/application has it's own path. It should break this request into two parallel requests, one for each path.
Thanks.
P.S. We are on GRC 5.3 SP 11.2.

So we've run into two CUP restrictions:
1. If you want to allow a request to have entries that can split into multiple parallel workflows, you have to use the role names in your initiators.
2. If you use role names in your initiators, you can't have the same role name in more than one initiators.
So basically you can't share roles across workflows, which is what I have been trying to do.
Is any of this documented some where? Would have saved me several weeks worth of work.

Is it possible to create multiple LDAP server in the same bi11g application

Similar Messages

Maybe you are looking for