Is it possible to create the social networking site with adobe muse?

Where users can create their own pages with their self information

Sort of .... you can do the layout, but then you would have to let Dreamweaver take over for the technical stuff. First you would need to upgrade to the eCommerce plan in Business Catalyst to allow for web apps. If you are advanced in knowledge of Business Catalyst you could use Muse but would have to create the dynamic content that uses the web apps within the Business Catalyst administration. Then place those web apps into content holders and place the content holder within your Muse page.
So while technically I don't see a reason it couldn't be done with Muse and Business Catalyst it would take some extensive knowledge of how Business CAtalyst Works.

Similar Messages

Adobe Muse: Is it possible to create a Social Network type website using Muse?

Hey everyone,
So ive recently came up with what i believe to be a pretty nifty idea for a social network type website, but i was just wondering is it possible to create such a website using muse? Ive created a few websites with it but never integrated features such as profile pages for users, searching options and other common things found on a few of the more well known sites such as Facebook, Twitter and so on. I dont really want to say what my idea is for obvious reasons, but if anyone knows if you can create a social network style website using Adobe Muse that can incorporate these such features, Id love to know. and if so can you point me in the direction of how to go about it, or to some instructional videos or sites that will help me out. thank you so much everyone,
Callum

Hi Prabha Sharma,
I am afraid that at this stage this is not possible via Muse as that requires server side coding. You can start off creating a skeleton/template for your social networking site via Muse and then use that further with your own custom code. however, I will not recommend that you continue making your site with Muse as you will face issues in altering the muse generated code.
- Abhishek Maurya

Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?

Hi All,
I am facing issues in creating adhoc network in Windows 8.1. After searching in internet, I found that adhoc works with
netsh commands.
1. I have tried neths commands and able to get it work on windows 8.1,
but I want to do it through the WLAN APIs ie. WlanConnect ,
2. I am able to initiate the adhoc network(on Windows 8.1) by using WlanConnect API and other device are also able to connect to the Windows8.1 initiated adhoc network but the DHCP is not working.
-> clients are not able to get the IP address.
Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?
Thanks
akhil

Hi,
Did you mean to write a program to implement that creating adhoc via UI? This should be development issue.
But this is Windows 8.1 client forum and there is no professional on develop.
To help you better, I suggest you submit a new case on MSDN forum to help to check your code as they will be more professional on your issue:
This is the MSDN forum link.
http://social.msdn.microsoft.com/Forums/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Kate Li
TechNet Community Support

Please! can anyone tell me if after I create a site with adobe muse, is there anyway for my client t

Please! can anyone tell me if after I create a site with adobe muse, is there anyway for my client to edit and update text and to a lesser extent images on the website?
I don't care if the client text/image editing and updating doesn't update in my Adobe Muse, as long as my client can update the text online.
Please help me answer this question, I have used adobe for decades (2) and am a print designer. I want to use Muse for websites but if my clients can't update text and images, I don't see how I can make it work.
If I have to use Business Catalist too; I don't care. I just want to be able to use this great software.
Sorry if I soud desperate but I'm holding on starting a website for a new client and need to get this answered first.

At the moment you can't using Muse's widgets, though you can insert html! So, you could have photo galleries linked to flickr that the client can update to, for example. I'm sure there are other options for slicker slideshows that can be updated client side!
For text, I'm too much of a novice, unless you were wanting a blog style: http://www.muse-themes.com/blogs/news/7257782-creating-a-blog-in-adobe-muse-powered-by-nab ble
Basically, I think you need to find the right html to embed for your purposes

Why am i not able to view comments from the social networking site Tagged

I have an account with the social network known as Tagged. I was advised to download Mozilla Firefox browser which I did.
Quite recently, whenever I visit my Tagged page, there is an error message - Error on Page. Tagged again advised me to use Mozilla Firefox browser.

an error appears which says sth
"sth"? Is that a word?

Create a web site with adobe muse

Greetings friend.
I am creating a website with adobe muse and I would do the following:
I want to split the page in half, vertically, and dereco side is solid while the web has scroll on the right side, you can do it with muse??
I want the contents of the entire ladoderecho froze while the left does scroll, not me myself clear. greetings
urges me some help

I did not explain well, shipping screenshot to explain better.
the web that is attached as an example the left fixed at no images, menus .. shown on the right side with the left scroll while still immobile.

How create a carrosel photo gallery with Adobe Muse widgets?

I use Adobe Muse 3.2 build 2, and I need create a photo gallery with many photos (around 60) like a carrosel (with photos and thumbnails that slides both from left to right). There is some way to create or insert a widget of this kind in Muse? If possible, in which Muse version?
I wanted a solution that works inside of Muse, to not create a HTML page separated, with the gallery, and after embed it into the Muse.
Thanks for any reply.

It is currently not possible to create a functional carousel using the out-of-the-box features available in Muse. You will need to look online for third party code or a widget from a Muse widget developer for something like this.
Cheers,
Vikas

Social networking site

Can someone share a link with me on any tutorials about creating a social networking site with JDeveloper
Thank you

@ O.P.,
You multi-cross-posted this same question six different times.
Since those posts were to different forums, that was deliberate.
As per the forums FAQ and also the OTN Terms Of Use that is the same as spamming the forums.
... not very good etiquette.
Five of those posts have been deleted and this one has been locked.
You have an answer here. It will have to suffice.

Connecting to Social networking sites via weblink

Hi
We have a req where in the user needs to go to the contacts Likedin profile from his contact page. In all the social network sites each profile is marked by a specific id. I tried using that id and passing it in the weblink whereby its working fine and I can view the contacts social net profile, But that id no user will know , I wanted to know how can I pass the contact name or email id and then view their profile page(I am assuming here that the contact name and the likedin profile name is the same).
Kindly give me inputs on the same.
Thanks
Meena

Please look at the following information for additional comments on this
Integration with LinkedIn

How would you use these Apple devices to create the best network?

I have the following devices and want to create the best network for my 3 story home:
Time Capsule 3GB, latest generation (needs to be located on middle floor in a corner room by the Comcast modem)
Time Capsule late 2009
Airport Express 2010
More data, the devices that connect to this network:
New MacBook pro (in same room with new Time Capsule)
New iMac (in same room with Time Capsule)
2009 iMac (on second floor)
Iphone 5 and 5s
ipad Minis
ipad Airs
Apple TV second generation
I've done some testing and the signal is pretty good on the second floor (meaning that the download speeds on the second floor iMac are the same as those in the same room with the new Time Capsule). But the upstairs bedrooms have speeds cut by 50%.
There is no reasonable way to connect the new Time Capsule by ethernet to any other devices.
Would it be helpful to extend the wireless network "wirelessly" with the old Time Capsule in an area upstairs with strong signal? Would the old TC then "re-pump" the signal into the bedrooms which don't have line of sight with the new TC?
How would I best do this?
Thanks for any help you can offer.

Time Capsule 3GB, latest generation (needs to be located on middle floor in a corner room by the Comcast modem)
Time Capsule late 2009
Airport Express 2010
So, the old Time Capsule and AirPort Express are near the new Time Capsule and connected to it with an Ethernet cable.....or are the old Time Capsule and Express not even in use at all?
Would it be helpful to extend the wireless network "wirelessly" with the old Time Capsule in an area upstairs with strong signal?
While it would be better if you could connect the old Time Capsule to the new Time Capsule using a wired Ethernet connection, the old Time Capsule might help things out a bit in the bedroom area if it is located where it can receive a strong wireless signal from the new Time Capsule.
This is one of those situations where performance cannot be predicted and you simply have to try it out in your home to see how well it will work. It could not hurt to use the old TC to extend the signal wirelessly to the bedroom area, if you want to give that a try.
You did not mention the AirPort Express, but it could possibly be located downstairs if you need more wireless signal coverage in a given area. The trick again, is to find a location where the Express can both receive a strong wireless signal and also provide additional wireless coverage.
Setting up the old Time Capsule or Express will only take a few minutes if you want to give things a try. Post back if you need more details on "how" to do this.

HT204053 the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/

the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/

Isa Garduño wrote:
the only way to creat an icloud account is with a ipad, iphone or imac Apple computer.
As you already knew, no, you cannot create a new iCloud account from anything but the above devices.
http://support.apple.com/kb/HT4436

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

The Social Networks app for N8 needs an update

The social networks app for N8 is OK, but one very critical example is that you can't see notifications on facebook, which basically is one of the most important things, to be able to see how people have directly interacted with you.
What's nice about an update like this is that it wouldn't need to be included in a firmware update, it could be a separate update for just this app.
What do you think needs to be improved?

Hi...
Tap Settings > General > Reset > Reset All Settings
You won't lose any data or media as a result of a reset.
If that didn't help, tap Settings > General > Reset > Reset Network Settings then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

Is it possible to create a 1 D array with the "build array VI"? when receiving random number

Hello all,
Is it possible to create a 1 D array with the "build array VI" when receiving random number?
I am receiving random data and the build array VI always create a 2D array which might cause some problem if you want to compute certain type of operation after.
Any example will be welcomed.
Thank you,
Israel

Hello Lynn and Yamaeda
First I want to Thank you Lynn for your linguistic contribution indeed "Build Array" is a primitive and not VI, thank you for the education. In reality what I am doing is simple.
I have two arrays of complex elements Array1 and Array2.
Array1 conains the complex elements ""(a0+ib0) ; (a1+ib1) ;...(an+ibn) ;
Array2 conains the complex elements ""(c0+id0) ; (c1+id1) ;...(cn+idn)
What I want to do is the multiplication of the first array by the conjugate of the second array element.
Array1*(Conjugate Array 2)" for the first element the results is "(a0.C0-b0.d0) + i(b0c0-a0d0)" and the etc...
and then taking the square root ([(a0.C0-b0.d0) power of 2]) + [(b0c0-a0d0) power of 2])
I was wondering if there were some dedicate primitive that could solve the computation above which is the cross correlation in Frequency domain.
Thank you very much.
Israel

Insufficient privileges to create the RDF NETWORK

Hi,
I am using user scott to test a rdf database using oracle 11.2.0.2 contained in oracle developer days. I granted resource, create session, create table, and create tablespace to scott. I am able to create a tablespace under scott. I also used the OEM panel to grant many privileges in roles, system privileges and object privileges to scott. However, I am still not able to create the rdf network under scott. The error says insufficient privileges to create the RDF NETWORK. How can I grant a priviledge to scott to create a rdf network? Thanks a lot.
hong

Hi Hong,
Yes. This is the correct order. You must first create the semantic network as a user with DBA privileges. After that, you can create semantic models with a less privileged user.
You can find more information in the Quick Start Section of the user guide:
http://docs.oracle.com/cd/E11882_01/appdev.112/e25609/sdo_rdf_concepts.htm#CHDEDFFA
Hope this helps,
Matt

Is it possible to create the social networking site with adobe muse?

Similar Messages

Maybe you are looking for