Is it possible to create this type of EFFECT in After Effect

http://www.simonbronson.com/#326097/hmv-xmas-2009
Is it possible to do This type of Graphic Effect in After Effect..?

I assume that you're referring to the twisty 3D ribbons.
Zaxwerks 3D Serpentine is good for that:
http://zaxwerks.com/3dserpentine/index.shtml

Similar Messages

Is it possible to create this type of 'Rule'....

Hi,
The spammers have got me good this time!! I am getting tens of emails a day asking if I want to buy gold. The problem is that I can't seem to create a rule to filter these out. The subject and sender are always different, and usually garbage. Also the email has no content, rather a gif image which is 8kb in size. I do tend to get a lot of emails from people who are not in my address book, so that option is not available to me. The only way I could imagine filtering these messages was to create a rule that if message contains attatchment 8kb (they are always the same size in my experience), then move to junk. Of course this rule seems impossible. How do you guys filter these messages out. I was already at the end of my tether with the gold stock options, but now I am also getting emails asking to buy a ring of some sorts!!!..... Any help please! Thanks

Hello Gwyn.
No single strategy is completely effective when it comes to managing spam. People who are intent on sending spam are ingenious at coming up with ways around any filtration schemes.
You can add a number of rules in an attempt to resolve the problem but doing so in regards to spam is like a dog chasing his tail.
In case you have unintentionally/unknowingly added to the problem regarding this increase in spam received, check Why was I "spammed" at my .Mac Mail address? which applies to any email account and How HTML Email Messages Relate to Unsolicited Commercial Email ("spam") which applies to any email client such as the Mail.app.

How to create this type of cursive font?

Is this done with brushes?
What would be the best way to create this type of handwritten look?
thanks

You could use an art brush to assign ink stroke like these to a line.
Create a brush type shape that's in a straight horizontal line with the desired beginning, end and edges.
Then Brushes > New Brush > Art Brush will create an art brush. (whilst the shape is selected)
With just one brush you will be quite limited, but with a selection of brushes generated in this way you can create a selection of brushes to deal with the various requirements of building a brush font that has some integrity.
You will find that despite automating the brush process to an extent, that to create lettering like you examples, you will have to make a lot of tweaks.

Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

Creative Cloud Plans
https://creative.adobe.com/#plans

If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

Here is a link to a page that shows all of the Cloud applications...
All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html

How can i make this effect in After Effects?

hello guys, im new to this awesome program, im using the trial version so ive limited time to learn XD
can you tell me ho can i replicate this effect in after effect?
http://tinypic.com/player.php?v=2ajnybc&s=6
looks like speed effect... is there a way to replicate it in after effects?
thank you

CC Bender is really easy to use. Just take the default settings and animate the amount with about three keyframes.
We can make it a lot more complicated with something like liquefy, or even Time Displacement.

----- Is it possible to create this mask shape effect in FCP X?

I've been playing around with some masks in FCP X, but I cannot figure out how to create this effect..is it possible?
I am interested in creating a mask shape where I can use it to identify something on the screen inside the shape with the surrounding area darker.
In FCP 6/7, I used to just add a slug on top of the clip, add a mask shape, tweak it, invert it and lower the opacity.
Any thoughts?
Thank you.

AppleUsur wrote:
… I am interested in creating a mask shape where I can use it to identify something on the screen inside the shape with the surrounding area darker.
in FCPX no masks nor additional tracks needed:
select the clip
in the Info board, select the Color Correction
there's a built-in Mask tool - select that
switch on the Color Board, here comes the trick: …
you are allowed to select WHERE the correction is applied: inside or outside the mask
(in my German interface Innen/Außen)
drag down the general exposure
there are handles to define size, shape, position
you can drag the outer circle (no handles) to define blurr gradient
you can even animate that highlight by key-framing it ....
with the same tool, you can e.g. apply super-fast some simple 'grading' such a 'CSI Miami-style Blue Sky':

Is it possible to make this type of network with router i have?

I have Linksys WRT54GC router at home and i share internet to all my PCs through the router.
Is it possible to share internet firstly through my PC, and then through this router to all other pcs? If it is possible how i should configure my router? If not - do i have to buy some kind of switch to make this type of network?
Example scheme:
(Net)
---------------------------- PC1 (with 2 NIC)
(routing) /
router ------/
| |___ PC2
\___ PC3
I have now this configuration of my PC's and router, but internet on PC2 is not working, but PC2 and router see each other. But ping between PC1 and router (192.168.0.1 192.168.0.2) says "no response":
MY FIRST PC:
http://www.improx.info/mypc.JPG
http://www.improx.info/mypc_2.JPG
Router:
http://www.improx.info/router_1.JPG
http://www.improx.info/router_2.JPG
http://www.improx.info/router_3.JPG
PC2:
http://www.improx.info/pc2.JPG
or i tried this:
http://www.improx.info/pc2_var2.JPG
http://www.improx.info/router_var2.JPG
Sorry for bad english.
Best regards,
Arnas
Message Edited by imuk on 12-19-2007 07:24 AM

It is not clear to me what the exact problem is. The screenshots show that everything is correct. The second PC should have internet with this setup. PC1 won't be able to ping the router on 192.168.0.2 if you block ICMP (anonymous WAN requests) on the router. That setting should be on the Security tab.
I would suggest to set up the WRT as simple wireless access point. That way you still have full LAN connectivity between all your computers. To do that, you have to temporarily wire a computer to a LAN port of the router. Unplug the gateway computer from the router! There is only a single computer connected to the WRT at the moment.
Open http://10.10.10.1/ or whatever LAN IP address you have set on the WRT at the moment. On the Setup tab, change the internet connection type to "Automatic/DHCP", change the LAN IP address from 10.10.10.1 to 192.168.0.2, disable the DHCP server. Now press the save settings button. You'll loose the connection to the router. That's OK.
Now rewire the router. Connect a LAN port of the router to the gateway computer. Do not use the internet port on the WRT! That is the basic setup.
Now wired computers connected to the remaining 3 LAN ports on the WRT should have LAN and internet access. In the same way, wireless clients connect into the ICS LAN and have internet.

Is it possible to create sub-type of siteConfiguration in SiteRepository

I am trying to create sub-type of 'siteConfiguration', but the OOTB Site Repository configurations doesn't allow except one type of siteConfiguration. Have anyone tried this and it worked out???

Why do you want to subtype, why can't you just extend the OOTB siteConfiguration
I don't really know if ATG allow subtyping siteConfiguration and how its going to work with multiple siteConfiguration type, but I would suggest you to extend the siteConfiguration if that is something which works for your requirement.

How can i create this type of texture?

Hey
I'm trying to replicate/create the texture in this poster. It looks to me like a fresh paint brush strokes or some plywood.
Any help would be great thanks (:

Mylenium is an After Effects kind of a guy, which apparently is the go to app for fractal noise, although Render Clouds and fibers are also considered to be fractal noise. I actually tried to duplicate the texture, and while I got close, it was not close enough to put up as a suggestion. This has a base layer of a mid green, with an overlaying layer in which I used Render Clouds with blend mode set to Vivid Light. The trick is in selecting the right foreground and background colours, and then repeatedly using Ctrl Alt f to reapply render clouds with new random settings.
This is the same layer with some 90° Motion blur applied, and high settings of Smart Sharpen. Also set to Vivid Light.
Something else to try is adding some noise to your render clouds if you are going to use Motion blur, because it gives motion blur something to work on. After adding the noise, you need to soften it just a tiny bit (Blur > Blur more). Then Smart Sharpen again, but you'll need much lower settings this time.
I know that several requests for better Photoshop fractal noise have been put on the Photoshop feedback site, but the master of this stuff is Bert Monroy, and I can't actually remember him using Render Fibers (the other noise generator along with clouds and difference clouds). Bert tends to use noise and motion blur, because you get more predictable, and definitely more even results than from render fibers.

Will it be possible to create new version of document only after releasing

Dear Expert,
is it possible to create a new version of the document only after release of the document...i don't want document version should be created other then release status.
Bhuwan

Hello,
Since you are a technical consultant also, probably you are in a better position to deside how to achieve this.
You will have to develop a user exit which will check status/ Release Indicator of Document when new version option is clicked through CV01N/ 2N/ 3N/ 4N transaction and take necessary action.
Regards,
Milind Dumbre

How to create this png overlay-on-swf nice effect in DW CS4?

Hi - any ideas on how, in DW CS4, to create this very well done effect?
It has a png alpha image overlay on top of a swf video, and looks nice:
http://www.digitaljuice.com/products/products.asp?pid=1154
Not sure the exact code to use w/flashvars, z-axis settings, tables to achieve this. Any ideas?
Thanks!

If you look at the page's source code, the answers are all there.
The Flash is embedded using a setting of wmode="transparent", which sets it up for a couple of useful purposes... it makes the Flash's background transparent (which is probably not the purpose sought in the instance)... and it makes the Flash embed in the page such that objects can be placed atop it.
Just below the Flash embedding code (~line 838) you will find the code for the image (~line 847) and the identification of the css id assigned for it ('overlay-image'). All of the css code is included in the source code, so you just need to search for that definition to see the properties assigned for it.

Creating and Selecting a line in After Effects CC?

OK, So I suppose this is a two part question...
But there is a little thing in After Effects CC that is annopying me alot, and it could just be me, and the way I've been doing things...
1) The way I have creating a simple Line in After effects, is by using the pen tool, placing two points, and then just using a stroke on the Shape Layer, and no fill. Is this the most efficient way to creating a line in After Effects? It's what i have always done, and it's not until CC that it has been a pain.
2) The reason why it's inconveniencing me is when i try to select that Shape Layer in the Comp Viewer! For some reason, in CS6, when i wanted to select that line, i could just click on it, and it selects the layer, Now, when i click on the line i just made, nothing happens, no where in the line that i can click or highlight will it select the layer of that line, Instead, I have to click the very center of the composition for some reason. there is small unseen point there that i either have to click exactly, or click and drag in that area, in order to select the layer, which gets annoying if there are many line at any given moment. This point is also where the anchor point for the layer is placed.... Is there any way to change this? To be able to change some setting so that when i click on the line itself, it selects it, and to have the Anchor point be placed in the center of the two point i make?

But I do this kind of thing all the time. The last 5 projects involved 8 stroked horizontal and vertical shape layers drawn with the path tool that I had to move around the screen. I also had a bunch of little shapes that were only 5 X 5 pixels. These layers are nearly impossible to grab in the comp window at even 200% zoom factor without inadvertently grabbing the wrong layer or scaling the layer when you try to move it in the comp window.
It is like trying to drive a screw with a hammer. It will kind of work but you will do a much better job if you use a screwdriver and the screw will remain undamaged. Hence, selecting small assets in the timeline and moving them around with the transform properties from the timeline is using a screwdriver. Using the direct selection tool is just the wrong tool for this and it always has been. You have to have some real estate to grab on to if you expect to move a layer without scaling it.
You can mitigate the scaling problem for small layers by adding a simple expression to scale so the layer always stays at 100% but this will just automatically fix the scale problem and won't help moving the layer around in the comp window very much.

How do you do this effect on after effects?

I want to animate a video making so as to make it look like a painting is painting itself in front of our eyes.
Take for example this picture
Starting from a white image, do you know a way, with after effects, to make it look as if an invisible brush was painting it before our eyes?
Please do tell me if i'm being unclear or imprecise about what i want and i will elaborate.
Thanks

You use animated track mattes. The trick is creating the track matte. You can use dozens of techniques but most if not all involve a bunch of hand work.
Here's what a Google search turned up as the first offering when searching "After Effects reveal painting tutorial." I didn't watch the tutorial but it should get you started. As I said in the first sentence, there are hundreds of different ways you can do this technique but all involve animated track mattes.

How to Create and export motion data from After effects CC to Flash CC

Hi there ,
Basically what I've got here is as follows.
I have a small character animation (about 100x100 px) - that is running inside a screen of 1280x720 px.
I want to hold the caracter in one position (so that I can get ridd off the useless alpha. i guess i will do that manually by keyframing)
and also to give a motion data to be used in Flash CC - to assemble the original animation.
Can anybody help me out with this?

Yeah, that's one of the reasons that we removed it: no one was using it. And it was terrible.
Here's more information:
http://forums.adobe.com/message/5555577
Of course, if you _do_ want this feature, it's relatively easy to save the project back to After Effects CS6 and then use After Effects CS6 to create an XFL file. Keep in mind that all Creative Cloud subscribers have access to CS6 versions, too.

Is it possible to create this type of EFFECT in After Effect

Similar Messages

Maybe you are looking for