Is it possible to create two multicast DR on the same subnet?

on server vlan 10.24.254.0/24, there are two routers:
R1 is .2 and R2 is .3 with "IP pim sparse-mode" enabled.
R1 and R2 are on two distinct Mcast domains
R1 has
ip pim rp-address 10.25.249.1 acl-one override
R2 has
ip pim rp-address 192.168.2.1 acl-two override
The problem is R2 with higher IP address is now the IGMP and PIM DR. Any multicast app with RP 10.25.249.1 is NOT working because R1 can't receive IGMP join from servers.
In addition, R1 by design can not reach 192.168.2.1 and same for R2 to reach 10.25.249.1
Thus configuring two "IP PIM rp-address" is not possible
how can I make R1 the DR for group IP under acl-one and R2 for group IP acl-two?
or I have to change network topology?

There can be only one DR on a the same subnet.If there are more than one DR on the same subnet it would endup sending duplicate multicast traffic for connected host.For more information refer the URL
http://www.cisco.com/en/US/products/ps5763/products_configuration_guide_chapter09186a0080312878.html#wp1091449

Similar Messages

  • Is it possible to have two DADs that access the same database?????

    Hello,
    Is it possible to have two DADs that access the same database?
    One DAD would be password protected with Authentication mode Per Package and the other DAD would not require a password/login
    If it is possible can you also give suggestions about how to do this
    Thanks
    Doug

    I HAD THE SAME PROBLEM WITH SHARING MY LIBRARY WITH MY SON. WHAT I DID WIAS CREATED A LIBRARY FOR HIS USE ONLY. IN ITUNES CLICK--FILE--NEW PLAYLIST AND THIS SHOULD ADD AN UNTILED PLAY LIST IN YOUR SIDE BAR. CLICK ON IT AND RENAME IT. HE CAN KEEP ALL OF HIS MUSIC IN THIS LIBRARY. SELECT ALL OF HIS MUSIC FROM YOUR LIBRARY AND DRAG IT INTO HIS. ONCE THIS IS DONE YOU CAN THEN REMOVE HIS SONS FROM YOU PLAY LIST. MAKE SURE YOU ONE REMOVE IT FROM YOUR PLAY LIST AND NOT DELETE THE FILE.
    HOPE THIS HELPS
    G4   Mac OS X (10.3.9)  

  • Can we create two dashboard prompts for the same column in the samepage

    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideas

    863997 wrote:
    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideasYou are correct. You cannot build two prompts on the same column. Use this link for instructions on how to build a "between prompt" because of this fact:
    http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/

  • How do I create two iTunes accounts under the same email address?

    I've got my account duplicated -and charged for apps I already own- by using my email address as login instead of apple ID, but I've been told it's my fault so…
    I'm trying to figure out
    *How do I do to create two iTunes accounts under the same email and having different IDs?*
    I mean, two accounts with different purchase history. It doesn't matter if billing address, or credit card are the same (or different) because none of them flag apps as "purchased"
    I tried today from iTunes, but it tells me the email is taken.
    Do you know any way a user can do it from our end? (website, iTunes, iPhone)
    If you've got charged by apps twice, please don't say it here. I don't want my post being deleted again. Thanks.

    Beavis2084:
    Expired .mac accounts HAVE NO EMAIL. You own the id (which iTunes requests to be spelled in form of an email)
    Also, FREE .mac accounts have no email either.
    What you see in the screenshots is what I'm saying:
    There's been a change in the way iTunes wants you to login. The iTunes reps see at their end what you see at the top of the window, which probably is the "migration" of the new login: Old login system, using ID (in form of email for iTunes)
    BELOW you clearly see where says "ID" and both have the email as login.
    (again, that .mac email doesn't exist and NEVER DID)
    That's the NEW login: your EMAIL.
    I'm sorry I didn't explain it better the first time. I wrote about this so many times to iTunes support reps to prevent them to "read" what their system says that I gave it for settled. (not to mention that my first post was removed because "it lacks of interest for others"
    I own an apple ID, given away with the purchase of a new computer (nothing small by the way) and when that happens (and never subscribe for a paid membership), you use ANOTHER email to be related to your account.
    Now that AGAIN apple asks you for using your EMAIL (non-apple in our case) instead of your ID (which you can't use or you will never get a notification again!) the system believes there are two accounts.
    It's like your credit card bank changing the address for sending the payments. You are STILL paying, but getting a higher rate because their CHANGED the address and the check never arrives.
    In this case, signing in with a different string, makes the system believe there are two accounts. And that probably is under the policy which probably states purchases are not charged twice for SAME ID, and SAME iPhone… and you used a different ID, so it must be fair (sarcasm). Who told you to do so? Bad boy!

  • Is it possible to create a Clone database with the same name of source db ?

    Is it possible to create a Clone database with the same name of source db using RMAN ...
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

    user11919409 wrote:
    Is it possible to create a Clone database with the same name of source db using RMAN ...
    yes
    >
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
    Handle:     user11919409
    Status Level:     Newbie (10)
    Registered:     Dec 7, 2009
    Total Posts:     102
    Total Questions:     28 (22 unresolved)
    why do you waste time here when you rarely get any answers to your questions?

  • Is it possible to create two correlation id's for same message in BPM

    Hi All
    Is it possible to define two correlation id's for the same correlation in BPM.. intially we defind one field as a correaltion id but in some rare situations we are getting two fiels at time containing the same correlation id then it is generation two instances for them ,but only one instance is executing and another one is in wait mode,in monitoring its showing TBDL (to be deliver mode)...we added one more field as a correlation id in correlation editor, but its not working only the first id is working.
    Seeking your valuable suggestions.
    Thanks.

    Are you correlatiing on a field whose occurence is more one 1(like 0..unbounded).?
    if you want to correlate on the first occurence of that field  then you have to specify in the XPATH.
    try [1] at the end of xpath
    If the field contains a structure, select Multiline.
    refer [this|http://help.sap.com/saphelp_nw04/helpdata/en/ab/13bf7191e73a4fb3560e767a2525fd/content.htm] for how to specify XPATH

  • How to create two independent index in the same RH project?

    Hello everyone
    I used Rh html 9.
    I created a new index in my project to have two independent and different index, but the two index are connected. When I deleted one word in the new index, the same word is deleted in the first index.
    When I've created the second index, I didn't choose the option "from an existing index", because I wanted a new and empty index but RH created a copy of the existing index and linked with the existing index.
    It is possible toc reate a lot of different table of content and glossary but not different index ?
    If someone can explain me why it doesn't work for index.
    Thank you.
    Florence

    Hi there
    If you click File > Project Settings > General tab, is the index set to have keywords in Topics or the Index file (HHK)?
    If it's set for Index file (HHK) that would likely explain it because the keywords are stored directly inside the topics themselves.
    If the setting is already for Index file (HHK) I'm a bit stumped and can only fathom that maybe you have stumbled across a bit of a RoboHelp bug. I've not tried using multiple indexes before. Perhaps I should try and see.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Is it possible to attach two receiver agreement in the same Service?

    when i configure the receiver determination
    there is one receiver service and one inbound interface
    but i want to send it out with two different agreements
    it seems that i cannot use the two agreement
    except i have two service.
    Is there some advice to handle this?
    Thank you in advance

    <i>there is sender service A, and the receiver service B, but i have two receiver agreements
    in the receiver determination, i only can choose one receiver agreement
    which i want to use the two at the same time </i>
    >>
    A is sender and B is receiver. Then why do you need 2 receiver agreements ?
    there will be one sender agreement for your sender A
    there will only be one recv. agreement. ie a combination of sender service + your inbound interface + your receiver service while you create the recv. agreement for your recv. B

  • Creating two iTunes accounts on the same computer

    I'm moving in with my girlfriend. She has her own iTunes library on her computer. I have downloaded all my music and applications from my iTunes library on my computer to my iPhone. I want to be able to download all music and applications on my iPhone onto my girlfriend's computer while keeping it separate from her music, apps, etc. This way, we hope to be able to manage her iPod and my iPhone from the same computer without worrying that iTunes will sync my music onto her iPod or that my apps won't get deleted by getting synced with her account.
    Is it possible to do this? If so, how? Perhaps this is a dumb question whose answer is right in front of me. But as yet I have been unable to figure out if/how using the online iTunes tutorials. Any help anyone can provide would be appreciated.

    http://support.apple.com/kb/HT1495

  • Somehow created two apple ids on the same email

    Hi there,
    I recently gave my other half my old iPad, however she went to sign into her apple id/ iCloud account and in the process somehow changed my iCloud settings such as my password.
    I tried signing in today and was prompted to enter the new password, which I had, however it seems to have created a brand new apple id, using the same email address as before. I'm unable to access my app purchases and the extra space I bought on the iCloud.
    Some (metaphorical) wires seemed to have been crossed somewhere, I was just wondering if someone could help me out with this.

    UPDATE:
    I've found the email address my other half has changed my apple id to. However when I try to access the icloud it asks me to set it up. All the files I had such as photos and contacts appear to have disappeared, so has the extra storage.
    I've spoken to someone at Apple and they said they can still seem the extra content and all the files, however I'm still unable to sign into the account with the amended email address.

  • Is it possible to realize two different processes in the same time with TDMS?

    Hello all,
    we have one TDMS but a lot of workstreams. Is it possible that 2 different workstreams in the same time realize anonymization in TDMS?
    Thanks in advance!!!
    Ilkin Mammadov

    Hello Anita,
    I am sorry.I mean we have a lot of projects (for example Procurement, Finance, Logistics, etc) and each of them wants to anonymize. But it is existing just one TDMS. Can these projects start with anonymization in the same time or they have to wait till one of projects finished anonymization?
    Thanks in advance!
    Best regards,
    Ilkin

  • Is it possible to create different font styles within the same text field?

    The form I am creating is getting really complex because when different fields require different font treatments (bold, italic, different font size, different font) I have to create a seperate text box and get it to align with the others. This wouldn't be an issue in most cases but this form is really detailed and has many text boxes. Before I stuggle too much longer on it, I thought I would check and see if there is a way to make them all in the same text field. If not, perhaps I am trying to use Acrobat for something it is not meant for. Any recommendations on other programs I could use? Thanks

    Thank you try76. I'm not sure if I did it correctly. As soon as I tick the Rich Text Formatting box it automatically changes the appearance of the text in the field (Helvetica Light to something like Helvetica Heavy) I can't seem to get the font back to Helvetica light or change the font size while the Rich Text Formatting box is ticked.

  • Is it possible to order two different cards at the same time? I do not want to pay shipping costs twice.

    Hi, here's my problem. I made two different Christmas cards that I want to hand over in person. When I order one however, I can not select the other one, despite the fact that I want them both delivered to the same adress. Is there a way to order both as a bundle?
    Thanks a lot
    Best, Stefan

    Afraid not.

  • Creating Two Different Designs for the same site

    I already have a website (www.ernestbuckley) but would like to design an alternate site with the same name and from time to time, just switch between the two for variety. Can this be done? Will I lose any data when I switch back and forth?

    Apnewbie's suggestion is right on track! You already have your domain name ( http://www.ernestbuckley.com ) that you forward to:
    http://web.mac.com/ernestbuckley/iWeb/ernestbuckley/Welcome.html
    If you made another parallel site with the different design and called it "ernest2", all you would have to do is to switch your forwarding to:
    http://web.mac.com/ernestbuckley/iWeb/ernest2/
    You can continue to edit both sites and when you want to switch sites, just change your forwarding again to the other address.
    BTW, if you want to start another site, you might consider using a program called "iWebSites" to help you manage your sites in separate Domain files. That way you keep them completely separate from one another and maintain the ability to edit and publish them independently of one another. Here is the URL for more info...
    http://mistergregg.com/cocoadrillosoftware/
    Let me know if you any other questions...

  • Is it possible to create multiple LDAP server in the same bi11g application

    Hi,
    they are 8 location users are acessing my report.now i am trying to implementing LDAP server for the user security in my obiee11g application. is it possible to configure/implement multiple LDAP server in the same BI server.
    Thanks
    Deva

    YES. refer http://total-bi.com/2011/07/multiple-ldap-authentication-providers-in-obiee-11-1-1-5/

Maybe you are looking for