Is it possible to customize dff's with the help of form personalization?

Is it possible to customize dff's with the help of form personalization.
I have added few dffs in a form which users want to be customized according tho their choices.
Can any one help me in this.

Pl see MOS Doc 420518.1 - section 10

Similar Messages

Is it possible to block an iPhone with the help of the support?

Hi there,
I was robbed last night. So they got my iPhone. I am in Ireland right now but the phone still runs through Vodafone Germany where I have a contract with.
I called them and asked them to block my phone through the IMEI. So now it is not possible to call through Vodafone networks if I can believe this.
I called the Apple support before that and they couldn't help me. But I have heard that it is possible that Apple blocks your phone so you are not able to use the phone any more. Unfortunately, I haven't used iCloud or iPhone search....

If you had a passcode on your phone, it will have to be forced into recovery mode & restored to remove the passcode. This will erase all data on the phone. If running iOS 7.0 or higher, the phone cannot be re-activated unless your Apple ID/Password is known. The phone will be nothing but a useless paperweight.

Is it possible to play civilization V with the macbook air

Is it possible to play civilization V with the macbook air

Civ V system requirements: http://www.aspyr.com/product/game_specs/125
Check against the tech specs of your MacBook Air http://support.apple.com/specs/#macbookair
Stefan

Portege R600 - Is it possible to make a call with the SIM?

Hi,
I wonder if its possible to use the Wireless connection manager 5 and to make or receive a call?

Hi,
I see that nobody answered so i will try to explain what i meant -
Is it possible to make audio call with the Wireless Manager by the GSM modem module?
I succeed to send SMS and to connect to HSPA data services but i dont find any reason why i can not connect to the GSM and make a call.
I have Portege R600 model PPR61E-01C00NG3
I even succeed to use the GPS that probably installed in the GSM/HSPA modem (wireless manager 5).
If anyone can explain how and if it possible to make a call please send your reply ... i wnat to use the laptop with BT instead of cell phone ....
Thanks
Yan

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

Not if it's not the original computer you registered it on.

Is it possible to downgrade to mountain lion with the help of a time machine backup after having updated to Mavericks?

Is it possible to downgrade to mountain lion with the help of a time machine backup after having updated to Mavericks?

Just to be clear, if by downgrade you mean uninstall, then the answer is technically, no.
You can't uninstall an OS. You can erase and re-install the old OS, but if you don't have a prior backup of your data, you'll lose it during the erase procedure.

Is it possible to use 2 displays with the mac mini

is it possible to use 2 displays with the mac mini

I wanted an extended desktop using 2 monitors.
I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution. I have a Mac Mini 10.8.2 i7 Late 2012.
I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
I am also using the included in the box HDMI to DVI-D Adapter from Apple.
Initial configuration was:
Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
I switched the monitor connections.
The connections that works:
HDMI out to HDMI in on the LG using a standard HDMI cable.
Display port | Thunderport to DVI-D on the Dell's DVI-D in.

How do you customize your sync with the new itunes?

How do you customize your sync with the new itunes?

Connect the device
Tap the icon for it towards the top right of the iTunes window
Same as before...
tt2

Custom report templates with the help of BI Publisher.

Hi All,
I have created custom report templates with the help of BI Publisher it is working as we excepted.
refered : https://blogs.oracle.com/kyle/tags/reports
But our requirement want to change the color of heading and include filters in output report, It is possible, if yes pls share you comments?
Best Regards
Pradeep

how silly of me!
just restarting the tomcat sorted the problem!!!

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

How to find the interface with the help of target table name

Hi friends,
Whether with the help of target table name, is it possible to find the interface name that invokes this target table in ODI 11.1.1.7.
Thanks in advance.
Regards,
Saro

highlight the datastore in the navigator, expand its sub tree, there is a 'populated by' node, under the node, it will list all datastores which are used as sources to the current datastore
then expand 'used by'->interfaces, it will show all interfaces which include current datastore(but maybe current datastore is used as source)
that's all you can get from UI, otherwise I suppose you can use SDK.

I bought Napoleon Total War from iTunes on 13 July. It downloaded properly and appeared on my iMac. Now, four days later I cannot find the application on 'Applications' or anywhere else on the computer, even with the help of Spotlight. Help.

I bought Napoleon Total War from iTunes on 13 July for £20.99. It downloaded properly and appeared on my iMac. Now, four days later I cannot find the application on 'Applications' or anywhere else on the computer, even with the help of Spotlight. Help.

A refund may not be possible since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you.
Good luck.

Using pc broadband internet in n85 with the help o...

Hi,
i have n85 and a pc broadband internet. i want share my pc internet in my N85 phone and laptop using wifi with the help of wireless router.Is it possible?????
plz suggest what equipment i need to use my pc internet into my n85 using wifi.
Solved!
Go to Solution.

You're going about it the wrong way.
You should connect the wireless router to the internet and then let both the PC and the N85 connect to the router and gain access to the internet through it.
The PC doesn't share the connection, the router does.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Is it possible to customize dff's with the help of form personalization?

Similar Messages

Maybe you are looking for