Is it possible to customize Siri's voice?

Just wondering, is it possible to have a little personality in Siri's voice.
I tried find out: can I personalize your voice?
She responded, "I don't really like these arbitrary categories"
Okay then.

Luke Tookey wrote:
Go onto Settings>General>Siri>Language and then you can choose any of the English ones and they work fine!
However, if you are in the U.S. and you change the language to anything other than the U.S. version of English, you will lose access to location based services with Siri.

Similar Messages

  • Siri change voice

    Does anyone know if it is possible to change Siri's voice? I mean .... without jailbreaking!
    Thanks
    Alberto

    Why is British English Siri only male while (or maybe whilst) one can choose male or female for American English? Is the gender choice only for us Yanks?  I was thinking that speaking with a Bristish lady might be nice for a change, but I have no choice. What's this all about?
    George

  • Is it possible to load Siri on a 3GS?

    Is it possible to load Siri on a 3GS?  Since the answer is a NO does anyone know of an app in the store for Siri-like voice control for the 3GS?

    Siri is ONLY on the iPhone 4S. Not the 4. Not the 3GS.

  • Is it possible to get Siri to work with 'old' Car handsfree systems?

    Is it possible to get Siri to work with 'old' Car handsfree systems?
    Unless I'm missing something - Siri doesn't work well with older handsfree car systems - as typically the cars built in system handles the voice control and relays the request to the phone over bluetooth protocols.  I tried initiating siri standalone while connected to the car and it failed.
    I was hoping I might be able to do some sneaky like 'Call Siri' to enter Siri mode but it doesn't seem to work.
    I'm guessing future Car handsfree systems will be Siri aware - but making Siri work with older systems (and my car isn't old - it's a 2011 model) would be very useful.
    Has anyone come up with a workaround?  I really don't want to have to buy or use a bluetooth ear piece
    Thanks
    Adam

    I never heard anything on this and so am still unable to use Siri without touching my phone.

  • Why is the mic not working working on speaker mode, even though siri and voice memos are working?

    I bought my iphone 4s from canada about less than a month ago. It worked perfectly fine, until i recently discovered that the mic on speaker mode stopped working. That means, when i speak to someone on speaker  during a call, they are unable to hear me.However Siri and voice memos are working fine.  I could initially face-time but now i cant. I have also tried restoring my iphone a few times.
    As i am based out of india, I contacted apple in India, they refused to touch the phone as it was purchased in Canada and the warranty is apparently applicable only in the country of purchase. I can in no way go back to canada to get the phone replaced. Does anyone have any ideas as to how I can resolve this? Shouldnt apple be able to get this sorted since its a brand new phone under warranty?

    Hello jaymc04_463,
    The following article details a number of troubleshootings steps that may help restore normal audio to your iPhone.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Allen

  • Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.
    Mark

    What was the answer to this excellent question, please?
    Mark
    Student
    Posts: 1
    Registered: 05-14-2009
    0
    Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
    Options 
    05-14-2009 06:56 AM
    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.

  • What's wrong with Siri and Voice dictation?

    Neither Siri or voice dictation is working today.
    Any idea what the problem is?

    I was having problems with dictation for days - the 3 dots would just vibrate a second, and then disappear.  It wasn't an internet connection issue at all.
    Finally found a (bizarre) solution on another site - use Siri to dicate a text (e.g., activate Siri; tell it to send a text to ________; then she'll ask you for the content and you say what you want), then tell her to send it.
    Voila, now if you go to use dictation, it works again.  (At least, that bizarre method worked for me -- I tried dictating an email and it didn't work; used Siri to send a text; then went back and tried dictation again and it was working perfectly.)

  • Is it possible to use Siri to send text messages to groups? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts.

    Is it possible to use Siri to send text messages to groups (categories, distribution lists)? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts. What app(s), if any, would I need? Is this in anyway dependent on my carrier?
    Thanks in advance for your help.

    Hmmm, that's strange - just checked again and it is 1066288.
    Note 1066288 - ESS LEA:Workitem XXXX cannot be executed in status COMPLETED
    Perhaps you can't see it because it is a "Pilot Release"?
    Release Status: Pilot Release
    Released on: 26.02.2008  04:54:32
    Priority: Correction with high priority
    Category: Program error
    Primary Component: PT-RC-UI-XS Self Services Web Dynpro

  • Is it possible to ask Siri a question in English and have it respond in another language?

    Is it possible to ask Siri a question in English and have it respond in another language?

    Not that I'm aware of (yet!) but who knows what Apple will develop for Siri

  • Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    No.
    Here are the available sizes:
    http://www.apple.com/ilife/print-products.html#prints

  • Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??

    Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??

    It sounds as if you have Voiceover activated. You should be able to turn it off by triple tapping the Home button.

  • Is it possible to text siri?? not text using siri-- but actually text siri

    is it possible to text siri??? not text using siri---but actually text siri

    No Siri is not a real person

  • Is it possible to customize the playback controls bar in a dvd flash?

    Is it possible to customize the playback controls bar in a dvd flash?
    I mean is it possible to change the size of the bar? and the size of the controls?
    Is it possible to remove (not hide or disable but remove from the bar) some controls as "search", "title" ecc...
    Thank You...

    CS5 greatly improved the options for player configuration.
    http://help.adobe.com/en_US/encore/cs/using/WS130B1F01-AE62-4c59-BA44-F29ACD8522EEa.html#W Sf01dbd23413dda0e-3ea68760123ebe30b7c-7ff2
    I have not played with this enough to answer your specific questions. Let us know.

  • Possible to customize #{bindings.Delete.enabled} checks at ADFBC level?

    11g ADF Faces w/ADFBC
    Is it possible to customize the checks for a Delete binding at the underlying EntityImpl or ViewRowImpl level?
    On my page I have a table within a panel collection. On the panel collection's toolbar I have a button tied to a Delete operation on the iterator that provides the table data.
    I want the Delete button to be disabled for certain rows based on various data checks. (In my case, checking to see if the DB row is referenced elsewhere in the DB.) Is there some EntityImpl or ViewRowImpl method I can override to perform this check?
    (I know I can override remove() to check and throw an exception, but this would occur after the user has pushed the button in the web page.)
    (I also know I can get the desired effect to work by creating a method on a backing bean to grab the selected row from the table and invoking my custom checking logic on it. However, I wondered if there was a better way to work with the ADFBC framework to accomplish this.)
    Thank you for reading my question.

    One way of doing it might be to create a transient attribute in your VO that returns true or false based on whether the row can be deleted.
    Then in your page have the disable property of the button based on the value of this transient attribute.

  • How do you slow down Siri's voice speed?

    How do you slow down Siri's voice speed?

    Hi. On my IPhone 4S, press the home button, General, Accessibility and then Speak Selection. 

Maybe you are looking for