Is it possible to customize the size of my iMovie '11 project?

I'm currently editing a video for a client that's sized irregularly - 1016x668 pixels. Ideally I would like it to be kept at the same size once I'm done with the editing. Is that possible to do in iMovie '11?

PamPoxx wrote:
…  1016x668 …  I would like it to be kept at the same size once I'm done with the editing. Is that possible to do in iMovie '11?
not really.
iM supports only the regular standards, 720x480, 756x576, 1280x720, 1920x1080. Done
And, btw, your res isn't 16:9 (nor 4:3) ... but some 'odd' aspect ratio.
but ...
in the Share/Export using Quicktime you could set that weird resolution back again - on Import it will be resized (and slightly distorted) and on Export gets re-distorted (English? ) again .........

Similar Messages

  • Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    No.
    Here are the available sizes:
    http://www.apple.com/ilife/print-products.html#prints

  • Is it possible to customize the playback controls bar in a dvd flash?

    Is it possible to customize the playback controls bar in a dvd flash?
    I mean is it possible to change the size of the bar? and the size of the controls?
    Is it possible to remove (not hide or disable but remove from the bar) some controls as "search", "title" ecc...
    Thank You...

    CS5 greatly improved the options for player configuration.
    http://help.adobe.com/en_US/encore/cs/using/WS130B1F01-AE62-4c59-BA44-F29ACD8522EEa.html#W Sf01dbd23413dda0e-3ea68760123ebe30b7c-7ff2
    I have not played with this enough to answer your specific questions. Let us know.

  • Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.
    Mark

    What was the answer to this excellent question, please?
    Mark
    Student
    Posts: 1
    Registered: 05-14-2009
    0
    Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
    Options 
    05-14-2009 06:56 AM
    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.

  • Is it possible to adjust the size of an inputText to the column size ..?

    Is it possible to adjust the size of an inputText that it correspond to the column size in a af:table.
    Thanks

    I don't need 30% ... i just need that me tree as a mininal width
    Here is my page :
    <af:panelBorder>
    <f:facet name="top">
    <af:panelHeader text="#{res['classification.repository.entryList.panelHeader.title']}"/>
    </f:facet>
    <f:facet name="left">
    <af:panelGroup layout="vertical">
    <af:panelHeader text="#{res['classification.repository.entryList.list.panelHeader.title']}">
    <af:tree value="#{bindings.ClassificationEntryListclassificationEntry.treeModel}"
    var="node">
    <f:facet name="nodeStamp">
    <h:panelGroup>
    <af:commandLink text="#{node.classificationEntryCategoryCode} #{node.classificationEntryCode}"
    shortDesc="#{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart1']} #{node.classificationEntryStatus} #{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart2']}#{node.classificationEntryCodeFullPath}">
    <f:param name="selectedIdentification"
    value="#{node.classificationEntryIdentification}"/>
    </af:commandLink>
    </h:panelGroup>
    </f:facet>
    </af:tree>
    </af:panelHeader>
    </af:panelGroup>
    </f:facet>
    <af:panelGroup layout="vertical">
    <af:panelHeader text="#{res['classification.repository.entryList.node.panelHeader.title']}"
    binding="#{backingRepositoryEntryList.entryNodePanelHeader}">
    <af:showDetailHeader text="#{res['classification.repository.entryList.base.panelHeader.title']}">
    <af:panelForm>
    <af:inputText value="#{bindings.classificationEntryCategoryCode.inputValue}"
    label="#{bindings.classificationEntryCategoryCode.label}"
    required="#{bindings.classificationEntryCategoryCode.mandatory}"
    columns="#{bindings.classificationEntryCategoryCode.displayWidth}">
    <af:validator binding="#{bindings.classificationEntryCategoryCode.validator}"/>
    </af:inputText>
    <af:inputText value="#{bindings.classificationEntryCode.inputValue}"
    label="#{bindings.classificationEntryCode.label}"
    required="#{bindings.classificationEntryCode.mandatory}"
    columns="#{bindings.classificationEntryCode.displayWidth}">
    <af:validator binding="#{bindings.classificationEntryCode.validator}"/>
    </af:inputText>
    <af:inputText value="#{bindings.classificationEntryCodeFullPath.inputValue}"
    label="#{bindings.classificationEntryCodeFullPath.label}"
    required="#{bindings.classificationEntryCodeFullPath.mandatory}"
    columns="#{bindings.classificationEntryCodeFullPath.displayWidth}">
    <af:validator binding="#{bindings.classificationEntryCodeFullPath.validator}"/>
    </af:inputText>
    <af:inputText value="#{bindings.classificationEntryIdentification.inputValue}"
    label="#{bindings.classificationEntryIdentification.label}"
    required="#{bindings.classificationEntryIdentification.mandatory}"
    columns="#{bindings.classificationEntryIdentification.displayWidth}">
    <af:validator binding="#{bindings.classificationEntryIdentification.validator}"/>
    </af:inputText>
    </af:panelForm>
    </af:showDetailHeader>
    <af:showDetailHeader text="#{res['classification.repository.entryList.mainTitle.panelHeader.title']}">
    <af:table value="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel}"
    var="row"
    rows="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeSize}"
    first="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeStart}"
    emptyText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
    selectionState="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.selectedRow}"
    selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.makeCurrent}"
    width="100%">
    <af:column sortProperty="language" sortable="true"
    headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.language}"
    width="20%">
    <af:inputText value="#{row.language}" simple="true"
    required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.language.mandatory}"
    columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.language.displayWidth}"
    inlineStyle="width: 100%"/>
    </af:column>
    <af:column sortProperty="content" sortable="true"
    headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.content}">
    <af:inputText value="#{row.content}" simple="true"
    required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.content.mandatory}"
    columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.content.displayWidth}"
    inlineStyle="width: 100%"/>
    </af:column>
    <f:facet name="selection">
    <af:tableSelectOne text="Select and">
    <af:commandButton text="Submit"/>
    </af:tableSelectOne>
    </f:facet>
    </af:table>
    </af:showDetailHeader>
    <af:showDetailHeader text="#{res['classification.repository.entryList.complementaryTitle.panelHeader.title']}">
    <af:table value="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel}"
    var="row"
    rows="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeSize}"
    first="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeStart}"
    emptyText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
    selectionState="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.selectedRow}"
    selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.makeCurrent}"
    width="100%">
    <af:column sortProperty="content" sortable="true"
    headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.content}"
    width="20%">
    <af:inputText value="#{row.content}" simple="true"
    required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.content.mandatory}"
    columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.content.displayWidth}"
    inlineStyle="width: 100%"/>
    </af:column>
    <af:column sortProperty="language" sortable="true"
    headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.language}">
    <af:inputText value="#{row.language}" simple="true"
    required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.language.mandatory}"
    columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.language.displayWidth}"
    inlineStyle="width: 100%"/>
    </af:column>
    <f:facet name="selection">
    <af:tableSelectOne text="Select and">
    <af:commandButton text="Submit"/>
    </af:tableSelectOne>
    </f:facet>
    </af:table>
    </af:showDetailHeader>
    </af:panelHeader>
    </af:panelGroup>
    </af:panelBorder>

  • Is it possible to adjust the size of the columnes when send alv by mail  ?

    is it possible to adjust the size of the columns when send alv by mail  ?
    i send alv ( list ) by mail  , work fine but all the columns are small and in the
    same size , can i adjust it in the mail   ?
    how to do it in regular alv i know it  .
    LS_FCAT-OUTPUTLEN = 29 .

    is it possible to adjust the size of the columns when send alv by mail  ?
    i send alv ( list ) by mail  , work fine but all the columns are small and in the
    same size , can i adjust it in the mail   ?
    how to do it in regular alv i know it  .
    LS_FCAT-OUTPUTLEN = 29 .

  • Is it possible to change the size of a partitioned hard drive?

    I use an iBook G4 (PowerPC) and partitioned an external hard drive. Is it possible to adjust the size of the partition without losing the contents of the external drive? If so, how?
    Thanks!

    Hi The Zach;
    Please read the requirements of these applications for resizing partitions very carefully! Most of them suggest that you back up prior to using them.
    After reading all of these warning rather then using any of these applications what I simply do is the backup first then change the partitioning with Disk Utilities and restore. I find this method to be quick and inexpensive.
    Allan

  • Is it possible to personalize the size or the Path to your cache, history, temporary files and others?

    Is it possible to personalize the size or the Path to your cache, history, temporary files and others? If it is, how can I do it?
    I explain why. I am willing to create a RamDisk partition where I would place that kind of files with support to a bigger size, that way increasing my speed in Internet, and avoiding permanent writes in the SSD drive.
    I am in i7 920 CPU, with system and programs working in a SSD drive and have 24 GB of RAM memory.

    Hi cor-el
    In my Desktop I have the 9.0.1 version of Firefox.
    I don’t know if it is or not the portable one, but I presume not.
    I couldn’t follow your first link, because page is not found.
    The second link takes me to somewhere where I have already been and that gives no solution to my question.
    I don’t want to disable cache in Firefox. By the contrary, I want it enabled and I’m trying to make it more efficient, making it bigger and placed in a very fast driver (A RamDisk driver, which is a driver made from RAM memory).
    '''''What I want is to configure by myself the place where the cache and other temporary files are placed in my computer, and their size.'''''
    So, I repeat my first question. Is this possible?
    Although I am Portuguese you don´t need to redirect me to Portuguese pages, cause I’m perfectly familiar with English.

  • Is it possible to increase the size of my startup partition?

    Hello,
    I need to know if it is possible to increase the size of my startup partition. I have a 320gig drive that I put in my MacMini. I had given my startup partition 100Gig, and then created 2 other partitions. I've since started getting messages that my diskspace was running low and wondered how that could be. Well, upon using Grandprespective I found I have a 45gig .sparsebundle file, which I believe is related to my use of FileVault. I had tried to turn off File Vault, but it then tells me that I don't have enough space to turn it off. My thinking, if it wasn't taking up so much space I wouldn't have that problem to begin with......
    So then I thought I might be able to adjust the size of my startup partition, but after I shrink the size of the partition next to it, it still will not let me shrink the size of my start up partition.
    Is it not possible to decrease the size of a startup partition?
    Thanks,
    Jeff

    Don't partition.
    Off load files to another drive.
    Clone and backup and then restore to a single HFS+ partition.
    Partitions either don't work, get in the way, or you/I have to be ready to redo them.
    Now, there may be a 3rd party program you can buy, but I'm not sure and of course you should not try anything without backups.
    First thing that comes to mind would of course be "iPartition" but as I said, never used or read anything on.
    The other, to buy yet again another larger or 2nd drive.

  • Is it possible to increase the size of the menu bar?

    My friend just got a nice new 27" iMac. On such a large display the menu bar disappears into oblivian when you sit far enough back to actually use such a large display. Is it possible to increase the size of the top menu bar? I had a look around at preferences and couldn't find anything.
    Thanks in advance
    SR

    In short, no. Just found five or six threads asking this. Here's one.
    https://discussions.apple.com/thread/2602785?threadID=2602785&tstart=45#12374829
    And, zooming the screen is a non-starter, because when you do that the menubar disappears entirely.

  • Is it possible to increase the size of the police in the finder menu in Lion?

    Hezllo,
    Is it possible to increase the size of the police in the finder menu in Lion?
    Thhanks for your reply.

    I see, in Finder you have the ability to see things in multiple views. I would very strongly recommend you use the Find Out How Video tutorials , specifically Finder Basics. You can increase the font size in any view by clicking the View menu - Show View Options where you can increase the font size.

  • In the metadata settings i can find the file size in pix. is it possible to see the size in inches?

    in the metadata settings i can find the file size in pix. is it possible to see the size in inches?

    Yes, that is one way to do it. But you can also do it by doing some simple math. For instance, let's say the you have an image that is 4000 x 6000 pixels. It doesn't matter whether resolution setting is in the file. The image is still 4000 x 6000 pixels. But you can decide what resolution you are going to export your copy. And you would do that for its intended purpose. If you are going for a high quality print then you would probably want 300 PPI in your export settings. With the example I've given the size print you can get had 300 PPI would be as follows:
    4000 (pixels) / 300 (PPI) = 13.333 Inches
    6000 (pixels) / 300 (PPI) = 20 inches
    So if you were really precise in needing a 300 PPI print you can get one that is 13 x 20".
    If you are preparing for display on the screen, the higher resolution isn't needed. Using the same math:
    4000 / 72 = 55.55 inches
    6000 /  72 = 83.33 inches
    By doing some simple math in your head you can determine the resolution that you need and the size that you need and set up your export accordingly.
    Technically speaking a digital image doesn't have a size other than pixel dimensions. Everything else has to be determined by the resolution that you need for the intended purpose of the final image.

  • HT5548 Is it possible to change the size of the icons shown in Launchpad? Mine seem very large.

    Is it possible to change the size of the icons in Launchpad? Mine seem very large.

    Thanks for the reply UKoC. You are close on the size. I would say they are about an inch to an inch and a half in width and only seven across the row. They just seem quite large on my display and I figured there would be an easy way. I kept thinking I just had to be missing the way for adjusting them since everything else seems to be so easy to personalize. Funny thing is that I have watched an online tutorial twice now on Apple's web site showing Launchpad and the icons shown there are smaller and more of them. I just thought I was missing the fix somehow. Thanks for confirming this.

  • Is it possible to change the size of a text box on a photo book page

    I am a first-time user of the photo book application in iPhoto. I am wondering if it is possible to:
    1. change the size of a text box
    2. have more than one text box on a page
    3. move the text box around.
    Thanks, in advance, for any suggestions someone might have.
    newtongrammy

    I am a first-time user of the photo book application in iPhoto.
    I also was a first-time user, so I started using it. Exploring the possibilities, learning my way around.
    Thanks, in advance, for any suggestions someone might have.
    Click the ? icon
    Oops. Sorry, but you're in the wrong forum : iLife > iPhoto

  • Is it possible to customize the GUI of a WIA microdriver?

    Hi,
    I've downloaded the WIA sample drivers and I'm developing a WIA microdriver using the sample as my starting point. One thing I'm having trouble with is the interface, I would like to get rid of the last two buttons and the quality adjustment text if possible,
    keeping only color and grayscale picture, but i have no idea where to change it. I've tried changing the SupportedDataTypes in the pScanInfo structure to only color and grayscale to no avail.
    Here's what my interface is looking like:
    Any tips where should I look so i can customize the interface?

    WIA micro-drivers are a deprecated model which is still supported for legacy device compatibility. The model offers only support for WIA 1.0 (Windows XP) and is limited in functionality
    even compared with real WIA 1.0 mini-drivers (mini-drivers which could replace the common WIA 1.0 Scan Dialog shown here with their own UI Extension Dialog).
    Recommend for the developer to consider moving to a WIA 2.0 mini-driver. If using one of the WDK driver samples as a template (wiadriverex or prodscan) such driver development
    should not that be very much complicated over a micro-driver, without any of the micro-driver limitations.
    The two mentioned WIA 2.0 driver samples in MSDN:
     https://code.msdn.microsoft.com/WIA-Microdriver-1972b1c5
    Sample
    Description
    PRODUCTION SCANNING WIA 2.0 DRIVER  
    The ProdScan directory contains a   sample WIA 2.0 mini-driver. This sample shows how to add Production Scanning   features to a WIA 2.0 mini-driver.
    EXTENDED WIA 2.0 MONSTER DRIVER
    The Wiadriverex directory contains a sample WIA 2.0   mini-driver. This sample shows how to write a WIA 2.0 mini-driver that uses   the stream-based WIA 2.0 transfer model. It also
    shows an implementation of a   very simple segmentation filter, image processing filter, and error handling   extension for the WIA 2.0 mini-driver.
    Best regards,
    Marius

Maybe you are looking for