Is it possible to customize thick-thin-thin layout myself?
May I know whether it is possible to customise the layout myself instead of using the default layouts provided by ips (e.g thin-thick, thick-thin etc.)
Thank you.
I have tried to search in Administration Guide and Programmmer Reference of iPlanet Portal Server 3.0, but I cannot find anything about DesktopServlet.
Where can I find "guide" for customizing the DesktopServlet?
Where can I find DesktopServlet anyway?
Actualy I want to customize the total width of thin-thin-thin lay-out to a fixed pixel witdh (instead of 100% as it is now).
Thanks in advance.
Similar Messages
-
I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?Thanks for your response,
I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all. Frans Vischer
author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
www.fransvischer.com
pamperedfatcat.wordpress.com -
Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.
MarkWhat was the answer to this excellent question, please?
Mark
Student
Posts: 1
Registered: 05-14-2009
0
Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
Options
05-14-2009 06:56 AM
Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you. -
Is it possible to customize print sizes (8x8) when ordering prints from Apple?
Is it possible to customize print sizes (8x8) when ordering prints from Apple?
No.
Here are the available sizes:
http://www.apple.com/ilife/print-products.html#prints -
Is it possible to customize the playback controls bar in a dvd flash?
Is it possible to customize the playback controls bar in a dvd flash?
I mean is it possible to change the size of the bar? and the size of the controls?
Is it possible to remove (not hide or disable but remove from the bar) some controls as "search", "title" ecc...
Thank You...CS5 greatly improved the options for player configuration.
http://help.adobe.com/en_US/encore/cs/using/WS130B1F01-AE62-4c59-BA44-F29ACD8522EEa.html#W Sf01dbd23413dda0e-3ea68760123ebe30b7c-7ff2
I have not played with this enough to answer your specific questions. Let us know. -
11g ADF Faces w/ADFBC
Is it possible to customize the checks for a Delete binding at the underlying EntityImpl or ViewRowImpl level?
On my page I have a table within a panel collection. On the panel collection's toolbar I have a button tied to a Delete operation on the iterator that provides the table data.
I want the Delete button to be disabled for certain rows based on various data checks. (In my case, checking to see if the DB row is referenced elsewhere in the DB.) Is there some EntityImpl or ViewRowImpl method I can override to perform this check?
(I know I can override remove() to check and throw an exception, but this would occur after the user has pushed the button in the web page.)
(I also know I can get the desired effect to work by creating a method on a backing bean to grab the selected row from the table and invoking my custom checking logic on it. However, I wondered if there was a better way to work with the ADFBC framework to accomplish this.)
Thank you for reading my question.One way of doing it might be to create a transient attribute in your VO that returns true or false based on whether the row can be deleted.
Then in your page have the disable property of the button based on the value of this transient attribute. -
Is it possible to customize dff's with the help of form personalization?
Is it possible to customize dff's with the help of form personalization.
I have added few dffs in a form which users want to be customized according tho their choices.
Can any one help me in this.Pl see MOS Doc 420518.1 - section 10
-
Set automatic billing reminders: is it possible to customize preferences?
Is it possible to customize preferences for when you will receive billing reminders? I found that the default setting reminded me too far in advance, and then only after I was late on a payment. If I could customize when I would receive the email reminders, then I would switch back to online reminders only, instead of paper. I find a week notice is optimal for me, and then if I haven't paid two days before the bill is due, I would also want a reminder.
Hi Keisei,
Are you doing this transaction in ME21N? You may want to post your question in the MM community.
Regards, Mike -
Is it possible to customize the email heading (subject) when using a email submit button
I have created a button for inserting a completed form into an email. Being the button auto inserts is it possible to customize how the button
titles the email & subject upon insertion?You can have more control on the email subject/ to and CC Email address, if you use a regular button and place the code in the click event.
Refer to the attached sample below.
https://acrobat.com/#d=HouRLov3lOntSbqAfsr5Hg
Thanks
Srini -
Is is possible to customize movie genre options?
is is possible to customize movie genre options? At the moment there are a limited amount of options for genres in itunes. I have several more genres than are accounted for ie comedy drama as well as comedy, for which I would like to set a custom icon . I would also like to, for instance, set a genre for a specific movie star. Not giantly important in the scheme of things of course, but it would look much nicer in apple tv.
any suggestions appreciated.
thanksSee this article for the instructions: http://blogs.oreilly.com/digitalmedia/2008/09/custom-genre-artwork-for-itune.htm l
-
I have 2 blogs on my site, I need to customize Blog Post Details Layout diff for each???
Hi,
Unfortunately it is not possible to have multiple details layouts for your blog per site at this stage.
Kind regards,
-Sidney -
Is it possible to create a custom photo layout when creating a photo book in iphoto?
Is it possible to create a custom photo layout when creating a photobook in iphoto? How about adding text boxes?
Yes and no
You can not make a custom template nor can you modify one
You can do a page in other software and then print to PDF using the send PDF to iPhoto option and place the resulting image as a full page photo - See Old Toad's tutorial No.19 for more information.
LN -
Lines getting thick and thin!
I don't have pressure on (It doesen't even work). I use the brush tool to draw a line and when I let the pen off of my tablet the line is thin in certain spots in the line and thick in other spots. I dont see how this is possible since I have no pressure...shouldnt the line be the same size as the dot I selected under lock fill in the brush options?
I think there are settings that are sensitive to speed as well.
-
Webi Thick and Thin Client difference
Experts ,
what are the differences between WebI server thin and WebI Thick client.
Can any one give solid 3-4 pros and cons for the same
thanksHi,
not that much:
- Webi Rich Client is Offline compatible
- You can build Reports on local Dokuments such as .xls or .txt
Regards
-Seb. -
Can any body please tell me in detail what is the difference between a Thick client and a Thin client. Also tell me using either of these in specific occassions.
And it's normally called a 'Rich Client' not 'Thick Client'.No, "rich client" is a newer developer.
s/developer/development/I think it's more than a when Sales/Marketing people wanted to promote thin client solutions (during the fashionable thin 90's) they used devisive language of (Thick/Fat) against the alternative traditional Client Server solutions even though these could be Rich or Thin. I remember when Applets where considered thin, then it had to be Web-Pages to be really Thin and now that things have gone full circle with the introduction of things like AJAX and WebStart they use the old^Wnew terminology, or Rich Clients to distance it from the negitive associations of Thick and Fat.
To me, fashions come and go but they will always be Thin or Rich :)
Maybe you are looking for
-
Is there a Macintosh OS 8.6 or 9.0.4 printer driver for an HP PSC 2355?
Dear Ladies and Gentlemen: I know this is very old {don't laugh}, but I was looking for a Macintosh OS 8.6 or 9.0.4 printer driver for my recently purchased HP PSC 2355 All-in-One printer. I run OS X 10.5.8 on an Apple iBook G4 and also run a Mac OS
-
I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.
-
Cannot select proper domain for group services
Hello- I have a working LDAP/Mail/WWW setup with all OS X servers. I'm trying to setup group services (mailing lists in particular) on our domain. I have created a group, when when I go to the "Enable the following services for this group on" dropdow
-
MDX query for derived measures
Hi, I have a requirement to show data like the below output. Could anyone suggest how do I proceed. For the below report StoreID and Date would be my parameters to the below report. StoreID date Department Total Sales For Dept A Units Sold for De
-
Assertion failed: Incorrect use of AdfRichUIPeer on adf tree
Hi all, I am using adf tree component as given below. <af:tree value="#{bindings.QACodesParentVO.treeModel}" var="node" selectionListener="#{QAReasonCodesBean.denialCodesRowSelection}" rowSelection="single" id="t1" binding="#{QAReasonCodesBean.t1}" c