Is it possible to cut out a certain part of a photo and add it to another

hi everyone
im a new aperture user and was wondering if anyone can help , is it possible to remove a certain part of a picture and insert it into another and if so how would i do it?
also is there more tools that are avalable i purschased the version off of the app store for mountain lion
thanks mark

I am sure that there will be other recommendations, but I like PSE because it can do most of the things that Photoshop can do, but it has a "guided mode" and good help files to walk you through. I also like "The Missing Manual" for PSE, it also explains things in a clear and simple manner.
One thing to point out, is that PSE works *with* Aperture. You would use Aperture to organize and do basic editing chores, and, when necessary, Aperture can send the image to PSE for additional work when done PSE sends it back to Aperture.

Similar Messages

Cutting out a round image from a photo and placing it on another image using a Mac

I have a mac and use PS elements ... I am battling to cut out a circular image and stick it onto a different photo... I ideally dont want the back ground hence the cutting out but I'm just not able to cut it out and then transfer ... I get as far as shaping it using the marquee tool and then it doesnt do anything further... I'm a novice at PS - Need some step by step help ... My short cut keys dont seem to work like pushing space bar to resize image or using shift to resize image??
Help

My short cut keys dont seem to work like pushing space bar to resize image or using shift to resize image??
Those are not PSE shortcuts. If you want to resize the view, press command plus the plus sign, and to make it smaller press command plus the minus sign. The space bar switches you over to the hand tool so you can move your image around to see a different part of it. When you release the space bar you go back to the tool you had before you pressed it.

Cutting out a certain part of video

Basically I want to know how I can cut out a certain part of a video and then put it onto another video, for example someones face onto someone else body.

You might find some of Curt Wrigley's tutorials handy for this:
http://www.wrigleyvideo.com/videotutorial/tutdes_slipsthrustill.htm
http://www.wrigleyvideo.com/videotutorial/tutdes_ppro2_smoothface.htm
Neither is exactly what you want to do, but the techniques are the same. You just need to read between the lines a little bit.
Now, your video source files can help you get really close, or can get squarely in the way. It might help for you to tell us what your video source files are. Be VERY specidic, as .AVI is but a wrapper, and doesn't tell us anything.
If you have AfterEffects, it will also give you much more power, but it can be done in PrP.
Hunt

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

Make your selection and then use Refine Edge.
See this video tutorial from Bob Gager.
https://www.youtube.com/watch?v=xrl3Qwg6zSc

Cutting out part of a photo and reshaping

Dear illustartors,
this may be a photoshop or illustartor question, I'm not sure. Here's what I want to do:
take part of a photo and cut it out - the shape isn't regular, something of a rough rectangle
take the cut out shape and reshape it, I need to move two oof the corners in to form a rough trapezium
I want the contents of the cutout shape (part of a photo) to shrink appropriately within the reshaped object... Imagine the shape is an old door, The shape wouldn't exactly be a rectangle because it's a bit beaten up; having cut it out I want to make the new shape but still see the edges, coners and panels, he new shap will be the same hieght on the left-hand side but reduced on the right-hand side - as if creating perspective.
Is this possible somehow?
thank you......................... liz

Thank you wade I will have a go!
UPDATE: yes that's good. I created a "sunray" using a line which I transformed to have as many lines as the mesh I used (actualy it had half the number plus 1 for the lower half of the sunray, then repeated the operation fo an identical line on top of the first but wit the ange of transformation = to 360 - the angle of the first line's transformation) and made the line long enough to get the perspective right, this I then used as a guide to move the mesh lines. The only thing I would have liked is to a) lock the verticalsin the mesh so I didn't move them inadvertently and b) if I could have moved the beginning and end point of a mesh horizontal and said now redrawn the line between these two points it would have been quicker. (I was using illustrator)

I'd like to wipe out my current LR of all photos and re upload new files. How do I go about this?

I'd like to wipe out my current LR of all photos and re upload new files. How do I go about this?

Option 1. Create a new catalog.
Option 2. Select all images, hit the delete key and choose Remove. Then select Import.

Check 2 tables(Table A and Table B) and figure out new columns present in Table A and add these new columns to Table B

How to check 2 tables(Table A and Table B) and figure out new columns present in Table A and add these new columns to Table b.
DDL-
Create table A
( A INT,
B INT,C VARCHAR(2)
Create table B
A INT,
B INT
Any advice on the best approach or method to achieve this.
I understand that I need to check the schema of the columns and then do a match between 2 tables and find new columns and then alter my target table
Mudassar

Can you try this..
CREATE TABLE A ( A INT, B INT, C VARCHAR(2) )
CREATE TABLE B ( A INT, B INT )
Declare @ColumnVar nvarchar(128),@DatatypeVar nvarchar(128)
SELECT @ColumnVar=x.COLUMN_NAME, @DatatypeVar=x.DATA_TYPE
FROM INFORMATION_SCHEMA.COLUMNS AS x
WHERE TABLE_NAME = 'A'
AND NOT EXISTS ( SELECT *
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'B'
AND COLUMN_NAME = x.COLUMN_NAME )
Declare @SQL VarChar(1000)
SELECT @SQL = 'ALTER TABLE B ADD ' + @ColumnVar + ' '+ @DatatypeVar
Exec (@SQL)
select * from B
Please Mark This As Answer if it helps to solve the issue
http://stackoverflow.com/questions/2614101/alter-table-my-table-add-column-int

Very much a beginner. How do I cut someone out of a group photo and move them to another part of the same photo?

I have a group photo and I would like to move someone from one side of it to the other. I would like to know how to select that person, cut him out, and paste him in a different place on the picture. Is that possible? If so, how? Thank You!

Try this
Photoshop Help | Content-Aware Patch and Move

HT1349 iTunes radio frequently cuts out in the middle of a song and rebuffers--a lot! This is really annoying.

I have a dual platform system and when I use iTunes on the PC side, it frequently craps out. It suffers from constant dropout and needs to rebuffer. I went on here to create a post about it and found the choice of communities disappointing. Furthermore, the MAc side also suffers from this issue. Anyone have any ideas as to why this is always happening?

Hey Ariddel,
I don't have the issue, but I am curious what's different between you and me. If you use nslookup in Command Prompt on Windows or use Network Utility on OS X to lookup pri.kts-af.net - what does it say?
Is it a particular genre or station that you're testing, or did you try several?
Could you share one of the streams you listen to and see this with that so I can test?
Does it happen at all hours, or are there only certain hours you listen to the radio in iTunes?
I know I mostly listen in the office - maybe it only happens when everyone is at work and listening to the radio?
Thanks for helping me with my curiosity problem.

Is it possible to uninstall Adobe Premiere Elements 13 from one computer and put it on another PC, using the same serial number?

I had installed Adobe Premiere Elements 13 on my laptop, which is slow. Is it possible to completely remove the program from my laptop, and reinstall it on another PC, using the SAME installation disc?

Tomquer
If all you have is the Premiere Elements 13 purchased activated serial number on one Windows computer, you can go ahead and do nothing else but install the program from the disc on the second Windows computer with the same purchased serial number.
That will leave you with the purchased activated serial number on two of your computers.
Adobe allows you the same purchased activated serial number on no more than 2 of your computers. So, nothing to do but to use one at a time.
Lots of scenarios beyond.
1. Deactivate Premiere Elements 13 from computer 1. Do not bother to uninstall. Deactivation is not the same as uninstall.
To deactivate, in an opened Premiere Elements 13 project, go to Help Menu/Sign Out. Close out of there.
Then do nothing, leave the program in the deactivated/installed state.
2. Deactivate and Uninstall Premiere Elements 13 from computer 1.
Any questions or need clarification, please let us know.
Thanks.
ATR

Acrobat 8 - Cut off x cm of the right side and add x cm to the left side of a PDF

Hello,
I've got a a large PDF and I'd like to cut off x cm of the right side of every second page of that document and add x blank white cm on the left side (binding margin). How do I do that (Acrobat 8, Win XP SP3)? Some guidance would be really nice sicne I couldn't find any solution on the internet.
Unfortunately, I don't have the original document or a printer which could do that. And please don't just post "use the crop function".
Thank you very much in advance.

Does nobody have an answer?

Can I make movies out of photos and add voice over as well as text?

Hi, I want to make movies out of some photos, and I want to add both text and voice over.
Is this something I can do with iMovie and if so, how?
Thank you.

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Mic is too sensitive, calls constantly cut out. People tell me y loud, and it sounds like I'm in a tunnel. Any background noise, and call is completely cutting out. This occurs all the time, but more so using earphones with in cord mic.

I have iphone5 ios6 and the Mic is too sensitive, and calls constantly cut in and out. People tell me there is loud background noise and it sounds like I'm in a wind tunnel. Any background noise, and call completely cuts in and out and sounds as if call is dropping. This occurs all the time, but more noticeable while using earphones with in cord mic. I never had this problem with my old iphone4. Has anyone experienced this, and is there a setting that can correct this problem?

Same problem for me. So bad in fact that I can't really use my headphones for calls. I have tried it with several sets of headphones. My primary are the Bang and Olufsen headphones which were great with the previous iphone 4 and 3.
Apple please address this issue.

I'm trying to cut out the introductory part of a song that I imported from ITunes and not start the song from the beginning

Has anyone ever imported a song from Itunes and deleted the first part of the song so that it starts at a certain location?

Sure. Drag the song into your Project from the Music Browser and drop it on the clip where you want it to start. It should appear as a ribbon underneath your video clips. You can then drag the left edge if the clip to the right, until it starts where you want it to.
This video Tutorial may help.
http://www.apple.com/findouthow/movies/imovie08.html#audioclips
Another way. Once you drag in the music clip, click the gear icon on the clip to open the clip trimmer. You can change where the clip starts there.
See iMovie Help here for all the details.
http://help.apple.com/imovie/#mov3b0fa95d

I am trying to cut out an image with the pen tool and when i make a selection it selects the whole image and not the cut out. How do i stop this?

The selection basically inverts when I dont want it to do that! Any help would be great, its becoming very annoying.
Thanks

It sounds like you need to change your path operations?
Is it showing:
change to:

Is it possible to cut out a certain part of a photo and add it to another

Similar Messages

Maybe you are looking for