Is it possible to define multiple Initial Extract Date' for Different modules ? INITIAL_EXTRACT_DATE

HI
We are configuring BI Apps 11.1.1.7.1 For HRMS and Financials. HRMS data should extract from '2010-01-01' and Financials Data should extract from '2012-01-01'
is it possible?
Source system: EBS 12.1.3
OBIEE: 11.1.1.7
BI APPS: 11.1.1.7.1
ODI: 11.1.1.7.0
OS: Windows server 2008 R2
by default 'Configure Initial Extract Date' to set the value of INITIAL_EXTRACT_DATE to '2005-01-01'.
http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e16814/overview.htm
Regards
Sher ullah

HI Srini VEERAVALLI
ITs confusing point. Cause on Configuration manager i am able to see 'Initial Extract Date' for HRMS also and in Financials also.
I created two separate Implementation projects respectively HRMS and Financials. so whether 'Initial Extract Date' can be setted Different for both.
Regards
Sher

Similar Messages

Is it possible to define a seperate number range for purchase requisitions

Hi Experts,
Is it possible to define a seperate number range for purchase requisitions that come from Forecast vs normal MRP requisitions so that our purchasing department can identify the origin of the document?
Thanks
for the thoughts
Sreeni

You'd need to figure out manually how forecast PR's are different from MRP PR's (the field from PR tables ) and then in the user exit I mentioned the program looks at the table T161 and field NUMKI, and if the PR getting created is from forecast change that NUMKI in the program to a different one else keep it as it is. If you're know abap programming it won't take long to figure out the logic else work with your developer to implement it.

Missing dimension members - - initial extract date question

We are configuring and implementing the out-of-the-box analytics. In the DAC, we set the initial extract date to be Jan 1 2006. It appears that when we run our initial full load ETL, it only loads suppliers that have been modified after Jan 1 2006. Suppliers prior to that are missing.
Considering that there are facts that can be associated to suppliers before that initial Jan 1 2006 date, we are noticing a problem. Is my understanding correct and how do we resolve this?
Thanks in advance.

Hi Ed,
Yes, I have set this $$INITIAL_EXTRACT_DATE parameter as you mentioned, but this is working fine in case 1 and NOT working in case 2.
I am using the same versions of DAC, Informatica and BI Apps in both the cases. Only the source system is different.
In case 1, its not an initial full load.
in case 2, its an initial load.
Thanks,
Harish.

Difference between the XML for the "Initial System Data" in the module ERM

Hello,
I wan to know what's the difference between the XML for the "Initial System Data" in the module ERM of SAP GRC AC 5.3.
RE_init_clean_and_insert_data.xml
RE_init_append_data.xml
RE_init_methodology_data.xml
And what "Initial System Data" do I have to put?? the rule set?
I'm new in SAP GRC.
Thank you very much.
Pablo Mortera.

Pablo,
I am sorry but I am not able to get the question so I will explain as per my understanding. All of these three xml files contain necessary out of the box data which is required for ERM to function. Without this data, your ERM would not work so this is the first thing you want to do in ERM after successful installation.
After that, you will have to create connector and landscape and then synchronize transaction code, auth objects, fields, values etc by running through each background job one by one.
Regards,
Alpesh

Using multiple apple id's for different purposes

We are a family of 4 with numerous devices. Here's the setup we've been using to manage different aspects of our apple life!
Each of us has an individual apple id, which we use on our individual devices for storage/backup, photo stream, facetime, calendar etc
We have one apple id, used on all devices for all app store/itunes purchases
We entered this id on each device with everything turned off except "find my iphone". This way we could be logged into the find my iphone app with one id and be able to see all our devices.
This has worked really well for us as a family. Well, yesterday my kids updated their phones (one 5 and one 4s) to ios 7. I have not done it yet. It does not seem to allow for the above setup, specifically where "find my iphone" is concerned. When I enter in that specific apple id as an additional icloud account, it doesn't offer the option of find my iphone. My ios 6 device says "only your main account can use photo stream, documents & data, and backup". Their device adds "find my iphone" to this list.
Does anyone know if this is a specific change apple made, or something that went wrong when initially setting up their updated phones.
TIA!

Thanks for your reply. But what I don't understand is, can I no longer have multiple icloud accounts, to be used for different purposes? Like I said, we have been using one apple id/icloud for storage etc and one for find my iphone.

Error in extracting data through function module

Hi All
         Need ur help .I am extracting data from crm thru function module.I have copied RSAX_BIW_GET_DATA_SIMPLE and modified it by using code.I am getting an error while testing extraction
Structure I have created ztest_01
Data Source :zmgc_ds1.
There 3 crm tables from where data is picked crmd_orderadm_h,crmd_customer_h,crmd_order_index.
I am attaching the code,can any body help me in correctring the error.Tell me if tthe placing of the code in the template is correct.please give details.
Error which I got:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "RSA3_GET_DATA_SIMPLE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRSA3" contains the CALL FUNCTION statement.
The name of the function module to be called is "ZRSAX_BIW_GET_DATA_SIMPLE_01"
but "ZRSAX_BIW_GET_DATA_SIMPLE_01" cannot be found in its function group.
Possible reasons:
a) The function module "ZRSAX_BIW_GET_DATA_SIMPLE_01" has not been activated.
Therefore,
    it cannot be found at runtime.
b) The Function Library contains an incorrect entry for
"ZRSAX_BIW_GET_DATA_SIMPLE_01".
c) The function module contains no code, even FUNCTION ... ENDFUNCTION
    is missing.
You help would be appreciated.
Don't worry about points,.

Did you create your function module without problems...assigned the Z* function group? activate the function module? i assume that you copy the function module code and the variables definition on TOP include of RSAX_BIW_GET_DATA_SIMPLE
Regards
Message was edited by:
        Oscar Díaz

How to upload multiple company codes data for single vendor by LSMW Idoc

Hi ,
My requ is like this.
uploading data by LSMW Idoc method
In source file we have two company codes data for single vendor.
It should create vendor for two company codes.
But its not creating its showing error.
How to handle this?
Thanks in Advance.

have you ever see this docu:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1a/178ac72d3011d3bc3500105a6588b2/content.htm
You can use the recording function to create a new object (or a new "import method") if neither a standard batch input program nor a standard direct input program nor the BAPI/IDoc method is available for a data object.
Recordings are static, thats why you cannot do such flexible things like multiple company codes at the same time.
But with IDOC method it is certainly possible, I have done it several times already.
Unfortunatly the creator of this thread did not say what error he got with the IDOC method. Maybe he will add this. Otherwise I dont think that anybody can help

Error while extracting data using function module

Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
Steve

Hi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit

One billing document for multiple deliveries which are for different PO

Hi All,
I have a scenario where i need to create one billing document for multiple deliveries.
Payer is same
Ship-to is same
PGI date different
Sales area is one
PO different
In standard SAP it will create seperate billing document for different PO
Please advice if there is a different copy routine which will combine all the POs in one billing document.

Hi Mr. Bhat,
Go to VTFL --> Select the combination of your delivery type and billing type --> Double click at Item(Left side) --> Select your item category --> Click at details
In the feild "Data VBRK/VBRP" --> I think the routine assigned is 601 (Inv.split - PO Num.) --> Now change it to 3 (Single invoice)
Then try your process, Hope it helps.
Regards,
MT

No data comes when extracting data for 2LIS_06_INV

Hi,
I am trying to extract data from 2LIS_06_INV into my BI system.I see the invoice numbers in RSEG table as created from SRM 5.0 into my R/3 system but unfortunately no data gets extracted.Please provide some pointers if some setting needs to be done for the same.
Joy

Hi,
It is working fine I tried with out activating in LBWE.
Thanks!
Surendra.

How to extract data for 0FI_GL_50

hi guys,
we need to use datasource 0FI_GL_50, delta is not supported for this datasource, how can we extract data from ecc?

Hi Ester,
If the datasource doesn't support delta load.....then you can't help this.
For ODS it will not be a problem if you keep the aggregation type as "Overwritten"....
But if you want Aggregation Type summation in the ODS level then you have to delete the content of the ODS before loading.....
For Infocube level duplicate records will be there......but you can avoid duplicate records in the following way...........
Use a Full DTP to load from ODS to cube and in the Process Chain you include the Process " Delete Overlapping Requests from infocube".....it will delete the previous request.......then there will be no duplication of records......
Actually what I feel is......there shoukd be three stage of loading.....
a) In the first level a ODS should be there with Aggregation Type Overwrite, so no need to delete the content..
b) 2nd level ODS with Aggregation type Summation, deleteion of the content required...
c) Then from ODS to cube.....include the step " Delete Overlapping Requests from infocube" at the end..
Regards,
Debjani.....

Reg: Extract Date for the closed periods

Hi,
In FI/CO, Every Financial year accounts have been closed.
Now issue is I want do extract the data for a particular period of which is closed (2002) By using some standard prog. It is giving an error msg that the input date is closed. How to over come this as a technical guy. They require the data for 6 months in 2002.
Regards
Reddy

Hi Santosh,
Thanks for your Questions. Below are the explainations:
1. Can you expalin how your system is behaving at the moment?
A. Presently the GR Processing time is 1 day for a material in Plant. So, if the user wants to produce on Wednesday (Planned date in PR, provided by the MRP run), then the delivery should be on Tuesday (Because GR processing time is 1 day). In the same way, he dont wants the delivery to be on Friday. I mean, if he wants to produce on Monday, he wants the delivery to be on Thursday.
Only Friday, he don't wants to make the Delivery.(The delivery date should not show Friday in PR's).
2. Pls explain your original MRP view and planning calendor setting...
A. For solving of the above issue, we changed the Lot size to copy of "PK" - Period lot size acc to planniong calendar. Then we maintained the Planning calendar, in which the periods are for every Monday, tuesday, wednesday and thursday. Expecting, the delivery should be excluded for friday, the friday in the planning calendar is not given as a period.
The scheduling paramter in the Lotsize is tried with both the options (period start = Deliery date and period end = Delivery date).
Later removed "PD" in MRP type and tried with "R1" Time phase req. But, the precondition for this is to maintain "Forecast req". This is also done. But, then, the system for this material is not responding to the MRP run. It is asking to run the forecast model. We ar not using SOP.
3. The results thst you get with current setting?
A. For the planned date in PR of Monday, the delivery date in PR is on the day before monday. i.e., Friday (Saturday and sundays are holidays).
4. Expected results...?
A. For the planned date in PR of Monday, the delivery date in PR should be Thursday (the day before monday production).
Hope, i am clear in my explaination. Please revert back, if you need any more information.
Thanks and Regards
Surendra Chakka

Is it possible to define multiple web services in one project?

I'd like to publish multiple components within one project as web services. but when I try to create it using the project New menu, it only prompts me and allows me to select one component . So does this mean only one web service can exist in one project?

Sunil
Thanks for the prompt reply.
I think I should have worded my question more clearly.
I have a project with multiple Java classes. I'd like to convert two of them into web services.
There are two ways to co this.
1. I right click on each class and select the Generate J2EE Web Service option. This will work correctly and allow multiple web services to be generated.
but this is not what I want to do .
What we are trying to do is to generate web services at the project level. I am following instructions in OTN web services tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
So , this is what I do :
1. Right-click on my project and select New from the context menu.
2. In the New Gallery, expand Business Tier in the Categories list and select Web Services, then select Java Web Service from the Items list. Click OK.
3. In the Select J2EE Web Service Version dialog, select J2EE 1.4 (JAX-RPC) Web Service, then click OK.
4. Click past the welcome page
5. This brings me to the page where I can select the web service and class.
This is where I am stuck - it seems I can only select one web service here . Unless I am missing something.
Or should I just repeat the process multiple times - running the wizard once for each class ?
Thanks for the help.

Defining multiple Crystal Report Data Consumer connections?

I am creating a Xcelsius object that uses data from Crystal Reports.
To do that, I define Crystal Report Data Consumer connection. With this I can use Crystal to connect to the data source, create table of data (crosstab) and pass it to the flash object.
But I can only define one such connection. Why can't I define more that one?
I would like to pass two different sets of data and use them in different parts of the dashboard. Trying to get all the data into a single crosstab may not be possible.
Is there another way to do this?
Thanks.
Tim

I have found that I can pass any number of tables of data from CR to XC using flashvars, either XML or CSV.
XML is easy, but you chew up 17 chars (64 bytes) in XML chars per column marker. And with a 64KB string max, you're left with at most 1K data points, and that's with no data!
CSV is old school XC 4.5, converting an array in to a row-order string, not nearly as convenient as a Crystal Report Data Consumers, but it works and you have only a 4 byte overhead per column (the comma.)
Converting cross-tabs to strings, though, can be a bear because cross-tabs are evaluated column-order and you may not know how many columns you are going to have.
So use the Crystal Reports Data Consumer for the intricate cross-tab and CSV flashvars for the other tables.
And then hope it all loads in less than 7 seconds.
Tim

Is it possible to handle multiple events using Jscript for a button in Apex

Hi,
I've application wherein in one of the pages for a button, I need to trigger 2 events as: 1. redirect to a new page upon 'click' of the button
2. display a set of values on 'mouse over' that button.
I'm able to handle both separately, but not in one button. I would like to know if there is any limitation in Apex that we cant handle multiple events? Currently I've put a text item near the button, and called the Jscript for mouse over event in that as a temporary workaround. Can someone let me know if this is feasible? If not any other alternative to handle this?
Thanks in advance,
gsachidh

Hi Gsachidh,
well interesting problem you're facinng. Indeed, it can't be specified using the 'Button Attributes' So we have to come up with an workaround.
A quick en dirty solution would be to specify it with the 'Optional URL Redirect options'. In a normal button, with processing on same page, this would be 'no target'. but in case of additional things to be done this can be used, using an target URL. I used this many times, in example with popUp windows for refreshing the caller object when changes are made. In your case we have to add next to the href an onmouseover event. this can be done with;
Target set to => URL
URL - target => javascript:doSubmit('<button_name>');" onMouseOver="javascript:showTooltip('tooltip');"
Here the " is the key, letting ApEx know the target (href) is doSubmit('<button_name>'), just like when no target would be specified and adding a new javascript event; onMouseOver.
Although this is a dirty solution in my opinion, it is the best i could come up with. I have another idea in how to do this, that is by adding this event dynamically with javascript with an addEvent. But i don't have an example at the moment for this scenario.
Simon
Message was edited by:
S1M0N

Is it possible to define multiple Initial Extract Date' for Different modules ? INITIAL_EXTRACT_DATE

Similar Messages

Maybe you are looking for