Is it possible to delete datas

HI Gurus
Is it possible to delete the old datas from  the cache server.
if iam deleting the old datas from the content server and now the cache server shows the datas, is it possible?. if possible how can i delete the datas from cahce server what are the steps to be followed
regards
kannan

Hi Kanna,
If your query is still not resolved, kindly refer the following method. It may help.
You can delete a document info record in CV02N, by setting the deletion flag in the header of the document info record. If the document could be deleted the deletion indicator turns green. For removing the document from the database tables you have to run report MCDOKDEL which removes all document info records that have set the deletion indicator.
Regards,
Ravindra

Similar Messages

  • Is it possible to delete data selectively from Business content cubes

    Dear Experts,
             Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
    When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
    A RAISE statement in the program "SAPLRSDRD" raised the exception  condition "X_MESSAGE".                                                                               
    Since the exception was not intercepted by a superior program, processing was terminated.  
    and i tried  with few more Technical content cubes but the same thing happens.
    Pls let me know how to selectively delete data from Business content cubes if it's possible?.
    Thanks in advance for your favorable assistance.
    Regards,
    Ramesh-Kumar.

    Hi Ramesh,
    Follow below steps for selective deletion:
    1.     Transaction code: Use the Transaction code DELETE_FACTS.
    2.     Generate selective deletion program:
    A report program will be generated of the given name, here .
    3.     Selection screen:
    Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
    After executing it will take you to a selection screen:
    As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
    Click on the technical information button (marked in red box above) you will get below screen:
         ABAP program to carry out the Calendar week calculation
    Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
         Transaction code: Use T-code SE38 in order to create a program.
    Logic: Suppose we need to delete the data older than 100 weeks.
    a.     Get the number of weeks and system date in variables and calculate the total number of days :
    lv_week = 100.      *number of weeks      
    lv_dte = sy-datum.     *system date
    v_totaldays = lv_week * 7.      *total days
    b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
    lv_calday = lv_dte - v_totaldays. *corresponding calday.     
    c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
    Get the sales week time elements
      call function 'DATE_TO_PERIOD_CONVERT'
        exporting
          i_date                      = lv_calday
          i_periv                     = lc_sales
        importing
          e_buper                     = lv_period
          e_gjahr                     = lv_year
        exceptions
          input_false                 = 1
          t009_notfound               = 2
          t009b_notfound              = 3.
      if sy-subrc = 0.
        ls_time-calweek(4)      = lv_year.
        ls_time-calweek+4(2)    = lv_period.
      endif.
    v_week = ls_boots_time-calweek.
    Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
    d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
    Submitting the Data deletion program for ZEPBGC01 and key field
    SUBMIT ZDEL_EPBG WITH C039 LT v_week.
              Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
    Hope ... this will  help you..
    Thanks,
    Jitendra

  • Is it possible to delete data from a block based on a view?

    I have a data block based on a view. I have set the delete allowed property to 'yes' using the object navigator, have set the database permission to allow delete, done a search through all the code to see where the delete_allowed property on the block may be reset in some trigger yet cannot delete records from the block.
    Any ideas?

    There are at least two/three ways to do this...
    Put an on-delete trigger on the block of the view with code something like this...
    delete from mytable where mytable_id = :myblock.mytable_id;
    ...or...
    dont do the above and add an instead of trigger to the view in the database. The instead of trigger intercepts the delete statement that would fail and executes code that you write in the trigger to go delete in mytable "instead of" the view.
    ... or...
    if you want to base a block on a procedure.. See this thread... Notice the metalink id in the thread..
    Re: Data block based on a procedure..
    Message was edited by:
    Mark Reichman

  • Is it possible to select an area on a graph and to delete data directly from it?

    Hi,as written in the message subject, I'm interesting in the possibility of delete data directly from a graph, using two cursors on the x-axis, or selecting directly an area.
    In fact I don't know how to link the cursor position to the data position in an array, in fact if I'm able to do this, I can use the cursors to select an interval on the x-axis and then with the help of a control on the front panel, delete the data from the array, and obtain a new graph without the selected area.
    Thanks for your kindly attention
    Best regards
    Michele Maria Marotta
    PhD students
    University of Salerno-Italy

    I'm assuming from your question that you have an XY graph built from an array, and I'm also assuming the array is sorted by the X axis.
    Create a property node for the graph (Right-click on the terminal and select Create>>Property node). Now you can either select the Cursor>>Cursor position and Cursor>>Active cursor properties to get the coordinates of the cursor(s), or you can select the Cursor List property to get an array of clusters that holds the data for all the cursors. Assuming you only have two cursors, you can use a for loop and place an Unbundle by name VI in it to get the cursor position. Now that you have the positions for both cursors, go back to the original array and remove the data that's between these values.
    Try to take over the world!

  • How to delete data-records with BI-planning in BEx?

    Hi folks, masters and gurus,
    we just upgraded some of our functions from BPS to BI-Planning.
    Only one thing I could not resolve up to now:
    In BPS (web based) it was easily possible to delete data-records by choosing a radio-button beside the data-entry-field and click the "delete"-button (a red "-") on the top.
    When I tried to find a delete-function in RSPLAN now I only found one that deletes the data, but not the record itself.
    Does anyone know how to build a function that I can use to delete data-records?
    Thx in advance for your help,
    Thomas

    Oh yes ... it´s not necessary as it is easily possible to supress lines with only 0 in it with
    query-properties / rows/coloumns / supressing Zero / activ ...
    Edited by: Thomas Kejik on Jan 19, 2009 9:46 AM

  • Is it possible to delete the diagnostics&usage data?

    First of all...i'm new in this community so hello to everybody :-)
    Please excuse my "creative english" I'm german but I do my very best.
    My question...
    Is it possible to delete the data in diagnostics&usage? If it's possible, how can I do this?
    I didn't allow the device sending data to apple but it always saves crash data or whatever.
    Theres no use of it for me and i don't want the iphone spend memory for this.
    I just read the handbook an started internet search but i couldn't find anything special about this.

    Why doesn't apple tell us, the people who paid for these products, how to delete the information that just keeps growning. COME ON APPLE, fix this.

  • All the data on my Ipad3 is wiped out. is it possible to delete all the data from my ipad if somebody knows icloud-ID and password

    All the data on my Ipad3 is wiped out. is it possible to delete all the data from my ipad if somebody knows icloud-ID and password

    It sounds like a remote erase was sent via 'Find My Mac', to check please go to www.icloud.com and login. Is there any data there?
    If it was a remote erase only someone who had the ID and password could have done it. And in that case the data is gone, it is not recoverable I'm afraid.

  • Delete data from DSO only with a part of the key

    Hi experts,
    I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
    Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
    I already found this thred in SDN but this is for BW 3.5:
    Delete data from ODS with only part of the key
    Thanks
    Ralf

    Ralf,
    the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
    Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
    Arun

  • Delete data from a flat file using PL/SQL -- Please help.. urgent

    Hi All,
    We are writing data to a flat file using Text_IO.Put_Line command. We want to delete data / record from that file after data is written onto it.
    Please let us know if this is possible.
    Thanks in advance.
    Vaishali

    There's nothing in UTL_FILE to do this, so your options are either to write a Java stored procedure to do it or to use whatever mechanism the host operating system supports for editing files.
    Alternatively, you could write a PL/SQL procedure to read each line in from the file and then write them out to a second file, discarding the line you don't want along the way.

  • Table for vendor deletion date

    Hi all,
    I want the table name that stores the vendor deletion date as per xk06 transaction. but not the LFA1 table as it just indicates deletion of vendor.
    thanks in advance,
    prash

    Deletion Date is being not caputered in any table.
    The only possible solution is that If you found deletion flag in any of the obove field then go into CDHDR any input Object as "KRED" and Object Value Vendor number and find the date. Take consideration of CHPOS table also.
    Regards,
    Rajesh koladiya

  • How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

    how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

    option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

  • How do I partition an external HD without formatting it or deleting data on it?

    I'm using OSX Lion and have an external HD, which is about 40% full. I'd like to add a partition without reformatting it or deleting data if that's possible.
    Anyone know how to do this? I've opened up Disk Utility and clicked on the Partition tab and have tried to use the re-size corner to change the size of the current partition, but it is greyed out and I can't sem to get it to work.
    Any thoughts on how do to this? Right now my drive is one big partition. I'd like to divide it into two partitions, again, without deleting data if I can avoid it.
    Thanks!

    John C Lin wrote:
    I'm using OSX Lion and have an external HD, which is about 40% full. I'd like to add a partition without reformatting it or deleting data if that's possible.
    Very possible. However, requires that the HD's formatted as OS X Extended, has the GUID partitioning scheme, and has journaling enabled. If those conditions are met, Disk Utility will do it.

  • Deleting data from a partition in a table

    There is a requirement to delete data from a particular partition in our PROD Env.
    Please let me know the syntax for the same.
    Also is it possible to truncate a partition?
    The DB version is 10.2.0.4 and OS is Solaris 10
    Regards,
    Narayan
    Edited by: user7202581 on Apr 14, 2013 12:11 AM

    Hi, You can use the following Syntex.
    -- For Truncate
    ALTER TABLE <table_name> TRUNCATE PARTITION <Partition_name>;
    -- For Delete
    DELETE FROM <table_name> PARTITION <partition_name>;

  • Is it possible to delete a relationship from the BP ?

    Hello experts,
    I'd would like to replace a function partner SH (having the same number as the DO) by another  from R3 to CRM5.
    At the begining i have in R3 this partner
    AG 3901007
    RE 3901007
    RG 3901007
    WE 3901007
    In R3 by the transaction VD02, I replace the partner SH by another
    After the modify i have in R3.
    AG 3901007
    RE 3901007
    RG 3901007
    WE 5000000
    When the replication is done in CRM using BDOC, i can see, by the transaction BP
    the new ship to party partner(5000000) .
    The trouble is :
    When customer access to ISA (standard version) to order product, he can select the partner 3901007 as shipping adress.
    By ISA, he should have the partner 5000000 only.
    Is it standard or is it a sap trouble ?
    Is it possible to delete a relationship from the BP ?
    I don't want to delete the BP partner, i just want to delete the relationship when then BDOC arrive in CRM.
    i have found the oss note 596334 497146 757955 too but it doesn't bring me a solution.
    Best regards
    Christophe

    Hello
    When you delete a Partner Function in R/3 the corresponding relationshipdoesn't get deleted in CRM. This is standard SAP behavior and not a
    bug. Reason for this behavior has been explained in Note 490454.
    You can change this behavior by implementing Note 497146. Also check
    the note 682427 which will help you in clearing old data.

  • How to delete data older than three years from DSO

    Hi  all,
    We needs to keep historical data in the DSO only for three years. One way of doing this is by selective deletion we can delete data older than three years but we want to make it authomated. Is it possible to add a process or ABAP program to delete data older than three years.
    If it is p[ossible by ABAP code then can you please give me sample code.
    Many Thanks in advance.
    Harman

    Some time for in case of huge volume of data selective deletion is not works, Try for "prunning" option.
    It's work as follows
    1)     Create DSO which is same replica of your Source DSO.
    2)     Create two transformation
         a) from Source DSO to Copy DSO
         b) Another is from Copy DSO to Source DSO
    3)     Transprort Last 3 years records to Copy of Source DSO using DTP Filter range for time.
    4)     Once data loading from Source DSO to Copy DSO get completed delete all data from Source DSO.
    5)     Now load data from Copy DSO to Source DSO.
    6)     After complete loading delete entire data from Source DSO.
    I use prunning process to one of my client and it's work perfectly.
    Regards,
    Sushant
    +919820849482

Maybe you are looking for