Is it possible to determine the sender when using a shared mailbox on Office365.

Answer would be greatly appreciated, thanks.

Hi Jamie,
It's not possible, unless you see the signiture in the email.

Similar Messages

  • Mask email address of Sender, when using Batch Bursting option in HFR

    Is there a way to mask the email address of the Sender when using Batch Bursting option in Hyperion Financial Reports?

    Not quite what you asked but you can add an email group, for example [email protected] which shows up as the sender.

  • In Lightroom 4, is it possible to change the resolution when exporting to Facebook?

    Is it possible to change the resolution when exporting a photo to Facebook using either the regular plugin or Jeffrey Friedl's plugin?  I can't seem to do it; I only have control over the image dimensions, not the resolution and the dimensions, as you can see in the screen shots below:
    I have control over both when I export to my hard drive (or a flash drive, etc.), as you can see below:
    I can't find the option to control the resolution when I try to export to Facebook.  Before I got Lightroom 4, I would create whole new low-resolution files of images I wanted to post online using Photoshop.  The image size settings I would use are a longest edge of 10 inches at 72ppi, and I would like to continue doing this.  If I can only set the longest side to 720 pixels (I can't even seem to set the longest edge to an inches value - I can only choose a pixels value) and not change the resolution from 300ppi to 72ppi, then my photos' longest edge will only be less than 3 inches long (right?).  Thus, I really want to be able to upload low-resolution photos to Facebook via Lightroom with the ability to change both the resolution and the image dimensions.  Any idea how to do it without having to export to my hard drive first?  Thanks!

    Rob Cole wrote:
    I'd be inclined to set it to zero so it obviously doesn't mean anything
    You can set it to whatever you like, and it makes no difference. Most of the time (depending on how you saved it), it will still open as "72".
    When you save an image for web, the resolution is usually stripped from the file. It's simply not there anymore. That's probably what happens in the Lr facebook module, and that's why there's no entry for it.
    But when you open that image somewhere else, that default of 72 ppi is assigned. Most apps need to know what to do with a file if asked to print it out. So there is a default, and that's usually 72, mostly by convention. With that default ppi, it prints out at a comparable size to what you see on screen at 1:1 display.
    And when people see that, they think "hey, web images are 72 ppi". But they're not - that figure is just inserted there by the opening application.

  • How to determine the policy, when it is applied?

    Hi!
    Perform Group Policy.
    When do I need to reboot when
    to logoff, and when the policy is executed after
    without further action?
    How to determine the policy, when it is applied?

    Hi,
    Group policy settings that affect computer settings section apply at reboot and refrresh every 90 min (default refresh interval for computers). Group policy settings that affect user settings section apply at user logon to the domain.
    You can use RSOP.MSC or command-line gpresult /? to find out what/which GPO settings have been applied to the computer/user belonging to a domain.
    More information can be found below:
    http://msdn.microsoft.com/en-us/library/aa373481(v=vs.85).aspx
    http://technet.microsoft.com/en-us/library/cc940895.aspx
    Hope this help.
    Regards,
    Calin

  • HT1498 Hi, Is it possible to change the language when renting movies from apple TV?

    Hi, Is it possible to change the language when renting movies from apple TV?

    It depends on how the java code is gnerated. If for example months are given with fixed array .... then it will only be english
    But then agin you have the source code (.java files) open all java files in the oracle.forms froject and alter to your language then recompile and reacreate the jar (easily done with Jdeveloper)

  • Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

    Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

    There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.

  • Is it possible to customise the email address used to send iCal invites?

    Hi,
    I am trying to find out if it is possible to customise the email address used by iCal to send an invite.
    i.e. each user would like their email address to be used rather than a generic one.
    Tks
    Ben

    Sorry, that isn't possible. The email address is used as the account name. If you need to change it, a new account would need to be created.

  • HT4437 Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

    Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

    No.
    I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled.

  • How to determine the purchasing group using BADI BBP_PGRP_FIND

    Hello Friends
    We use SRM Server 5.5 (Classic scenario).
    As you know that, purchasing group has the responsible product categories in PPOMA_BBP, when user creates the shopping cart to determine the purchasing group. 
    In our case, we should determine the purchasing group using other criteria.
    MM side is OK to determine the purchasing group using specific criteria.
    Because Material Master has the purch. Group information. 
    In case of SRM, we should develop the logic using BBP_PGRP_FIND BADI.
    But I’m not sure how to use this badi.
    We want to determine the purchasing group based on the following logic.
    If described shopping cart without product ID
    Do Standard purchasing group determination logic.
    Else
    Assign the purch group from MARC- EKGRP (Purchasing Group)
    Is it possible to determine above the logic?
    If yes, Could you give me some information?
    Thank you,
    Best regards,
    SH
    Message was edited by:
            So Hee Lee

    Thank you for your answer.
    I found the way to develop the our logic using BADI: bbp_pgrp_find.
    But I’m not sure the following logic is correct.
    To differentiate described req. or product id req, We check the E_ITEM – PRODUCT using BBP_PD_SC_GETDETAIL.
    IF E_ITEM – PRODUCT is blank, Read the category ID to find the purchasing group.
    To find the purch. Group, we can use FM:  BBP_OM_DETERMINE_RESP_PGRP.
    Import parameter: IS_RESP_ITEM_DATA – Category _ID
    Export parameter: ES_PURCH_DATA
    ELSE
    CALL the customer function to read the R/3 purchasing group from MARC- EKGRP
    Search the HRT5500-TABNR using purchasing group from R/3.
    Search the HRP5500 – OBJID using HRT5500-TABNR
    Call the FM:  BBP_OM_DETERMINE_RESP_PGRP
    Import parameter: IS_RESP_ITEM_DATA – PROC_GROUP – OBJID
    Export parameter: ES_PURCH_DATA
    Thank you
    Best Regards
    SH

  • How to determine the process alias using condition technique in Transportation & Shipment Scheudling?

    Dear All,
    I am trying to use the functionality Transportation and Shipment Scheduling in GATP.
    I would like to know that how the sytem determines the process alias using condition technique in Transportation & Shipment Scheudling?
    As the Transportation & Shipment Scheduling functionality can be extended further by using the configurable process to overcome the complex scenario. But it needs that process alias should not be determined by using the condition technique.
    Moreover, is it possible to use both functionality simultaneously in the system. i.e. Transportation and Shipment Scheduling using condition technique and Transportation and Shipment Scheduling using configurable process?
    Thanks & Regards
    Piyush Ranpura

    Hi Piyush,
    I have added a small overview in the SCN WIKI which shows you the two ways for the process alias determination and also here as attachment:
    http://wiki.sdn.sap.com/wiki/display/SCM/Time+and+Scheduling+Functions
    Yes, depending on your customizing you can use both scheduling methods in parallel. e.g. you activate CPS just for a specific ITEM category or product and/or customer and/or....what ever you want.
    best regards,
    Michael

  • Emails that I receive are not appearing with the fonts, etc., that the sender is using.

    Emails that are sent to me do not show the fonts, size and color that the sender is using when writing to me. Also, when I look at the emails that I have sent, the font is very small. But, when I am writing an email all appears the way I want it to.
    I do not know how to get my Thunderbird settings to show the exact way emails are sent and received by me. I would appreciate any help so that I can get back to the way my Thunderbird program worked in the past (I had to have a new hard drive installed so Thunderbird was downloaded, again. Of course, I lost all of my address book, too).
    Thank you.
    Carol

    http://chrisramsden.vfast.co.uk/9_Type_sizes.html

  • Captivate 5.5 is setting a Mastery Score in the Manifest when using Slide Views

    We have encountered a problem with Captivate 5.5 where it is setting the Mastery Score in the manifest to match the Quiz score setting even though we are only using slide views to track completion.  This is a problem because if we set the score to zero, our Saba LMS will immediately grant the user credit for the course on the first slide.  If we set the score higher than zero, the user will never get credit for the course as Captivate doesn't send a score to the LMS when using slide views to track completion.  Our LMS seems to ignore the status passed by the course once the Mastery Score is set.  We have compared the manifest behavior in 5.0 and it does NOT set the Mastery Score.  We can edit the manifest prior to loading in the LMS but this is a hassle and we'd like to figure out a way to permanently change the behavior to no longer set Mastery Score when using Slide Views to track completion.

    Hi,
    I believe the easiest way to do this is to edit the manifest.xml file in the Captivate Templates folder.  I posted instructions on doing that here: http://forums.adobe.com/thread/956390?tstart=0
    Hope this solves your issue.  V

  • Is it possible to eliminate Outlook 2008 when using Outlook 2011?

    Is it possible to eliminate Outlook 2008 when using Outlook 2011?

    Sure!
    I personally like AppCleaner (free), a product you could use to remove Office 2008 (I think you meant Office, not Outlook).
    AppCleaner would remove the executables and a lot of the extra stuff associated with the software.

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • How can I prevent my family from having the ability to erase my devices when using Family Sharing?

    When using Family Sharing, it appears that all family members have the ability to lock and erase all devices that are linked to the family account. This does not seem very secure. For example, I wouldn't want my disgruntled family member to arbitrarily lock or erase devices, remotely.

    If you're using iTunes Match you might want to post this question over in the iTunes match forum:https://discussions.apple.com/community/itunes/itunes_match.  They may be able to help you over there.

Maybe you are looking for

  • DVI to S-Video & Composite plug cable needed for output to audio/TV system

    I'm in need of a DVI to S-Video and Composite plug cable to replace the Monster iTV Link cable I used with my 12" Aluminum PowerBook. (http://www.monstercable.com/apple/Computer.asp) I use it to output to my audio/TV system. Whereas the PowerBook use

  • Downloading Past Purchases

    Can someone please explain what this means? I can't download my past purchases whenever I feel like it? This computer is already associated with an Apple ID. You can download past purchases on this computer with just one Apple ID every 90 days. This

  • Can you change a group of PO's for the same Service Receipt Approver?

    When a Manager leaves/moves teams, we run a report via SQ01 to find out which PO's are still open, and manually go into each and change the Service Receipt Approver tot he new Manager's ID. This is to ensure workflow works correctly for approving the

  • Makepkg.conf the same as make.conf

    Simple question really, is makepkg the same as make? If I add in CFLAGS will they be used when compiling packages from source or does makepkg just work when using makepkg.

  • Arabic font become smaller in Pages' PDF in Yosemite

    It seems that Pages (5.5.1) in Yosemite has a bug that makes some fonts become small when exporting or making PDF. I have this problem, both in Adobe Arabic OTF font and a font that an OTF font that I've made myself. Does anybody has any solution or