Is it possible to disable DHCP on Airport when using PPPoE?

Hi,
I wish to use the Airport to dial PPPoE and act as a router but I want it to use a static IP address and use my DHCP server.
Is it possible to set this up?
Currently the router mode option is set to "NAT and DHCP" but is greyed out so that I cannot change it..

Sorry, but it is not possible to do what you ask when the AirPort is configured to connect using PPPoE settings.

Similar Messages

Kindly Is it possible to disable DHCP in this product wap4400n ?

Dear Engineers and Technicin,
Good Morning,
Kindly I need support for wap4400n and I did not find it in the user guide and the administration guid.
Is it possible to disable DHCP in this product?
I want the wap4400n Access Point to distribute DHCP from the windows server.
Best regards,
Asad
Refrence:
http://www.cisco.com/en/US/products/ps10052/index.html

I dunno the product, but I might be this ...
http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf
page 25 ...
STEP 1 Click Setup > Basic Setup .
STEP 2 From the IP Settings drop-down menu, select one of the following options:
• Static IP Address—Select this option to assign a static or fixed IP address
to the access point.
• Automatic Configuration—Select this option to automatically configure
the IPv4 network settings of the access point using a DHCP server on your
network. Also select this option to automatically configure the IPv6 network
settings of the access point using an IPv6 RADVD device enabled on your
network.
But i think it is just a brigde, hence your DHCP server is external to the device.
So you have nothing to disable so to speak:
From the Frequently Asked Questions, in the above PDF:
Q. Can the access point act as my DHCP Server?
No. The access point is nothing more than a wireless hub, and as such
cannot be configured to handle DHCP capabilities.

Is it possible to disable the play button when exporting to exe or app files?

Is it possible to disable the play button when exporting to exe or app files? Can the app just boot up without the playbutton?

Are you talking about auto play option or the play button on Playbar?
I just checked the EXE ran fine without requiring any play button to start as per my settings.
Is this waht you are looking to achieve?
Thanks,
Anjaneai

Disabling Java popoup messages when using internet browser

As of late, the new JRE 1.7 displays security popup messages asking the user to allow the usage java application when used via an internet browser.
Our customer base is using our application via intranet with a local server, those popup are becoming a annoyance as well as creating issue in our application. For example, with have a timeout to automatically log out of the application which now requires the user to validate it prior running, which against governmental requirement in our case.
Is there a Java setting that would allow to disable those messages? If not, is there a solution to register our application as safe to run through Java. As of now the solution is to run older version of JAVA (7u3) to allow proper usage.
Thanks

Hi,
have a look at this thread: The specified item was not found.

Is it possible to get a black background when using Picture Book layout in iphoto?

I want to customize the layouts more in iphoto--either be able to use a black background when using the Picture Book layout, or have more layout options in the Photo Essay layout. Are either of these possible?
Thanks!

Yes.

Qosmio X770-11C - how to disable on board speakers when using Line Out?

Hi,
Is there any way to disable on board speakers when the line out is used.
Currently if I plug in a cable to the hadphone socket and choose lineout on the realtek control panel, the sound is output to the line out as expected but also through the internal speakers.
Is there any way to stop this, and only have sound going out through the line out?
thanks
Graeme

If you want to hear sound on headset only you must choose Headphone option.
Disconnect cable and connect it again. When you see small window on the screen where you can choose between headphone and line out options choose headphone and you will hear sound on external device only.
In case you have disabled this popup dialog you can activate it manually. Open Realtek manager connect external device and when you see activated black point on the right side make double click there and change settings.

Is it possible to disable clicking a window to use?

This is a bit of a strange question, so I'm not sure where to find the answer.
When I'm developing a website often I have multiple applications open, let's say for example a .txt file and a browser. I want to move text content from the .txt to the browser and I need to do this many times. But each time I want to copy some content from my .txt file in need to click once to make it active, only then can I select the text and copy it. Now I need to click my browser to make it active and paste the content into an online form. I need to do this hundreds of times a day... I don't even know from a usability standpoint if this is possible but it would reduce the number of clicks i need to make by half if I didn't have to "activate" the window before working with it.
Has anyone come accross this before? and what are my possible solutions? maybe active on a mouseover, that would be pretty awesome i think but again i don't know anyone that has ever tried this.

Google search for "mac os x focus follows mouse" comes up with
MondoMouse
Zooom/2

Is it possible to disable the "pop" sound when adjusting the volume?

It's just plain annoying.

Thankfully, the solution is very simple. To silence the volume-changing beep, hold down the shift key while pressing the volume-up or volume-down key. (This doesn’t work when you use your mouse to select the volume menu on the right side of your menu bar.) If you’re using an iBook or a PowerBook, and you’ve set the Keyboard & Mouse preference pane to require the fn key in addition to the volume-changing key, don’t worry: adding the shift key still silences the beep and doesn’t require too much in the way of finger gymnastics.
Ray...I knew I'd find something

Is it possible to cancel a message request when using find my iphone?

Is it possible to do this?

No, once you send the message, it will arrive at the soonest opportunity.

Is it or will it ever be possible to hide the notifocation bar when using firefox? Either with an extension or as an included setting?

is there an option i havent found that will allow me to hide the notification bar while using firefox (similar to whats possible with opera mobile) if not is it likely to be added in a future update? as i dont think extensions have enough permissions to hide the notification bar.

hello, there's the fullscreen addon: https://addons.mozilla.org/mobile/addon/full-screen-252573/

Possible for Oracle to consider constraints when using bind variable?

Consider the following table with a check constraint listing the possible values of the column
create table TEST_TABLE(
my_column varchar2(10));
insert into TEST_TABLE select 'VALUE1' from dba_objects;
alter table TEST_TABLE
add constraint TEST_TABLE_CHK1
check (my_column in ('VALUE1', 'VALUE2'));
begin dbms_stats.gather_table_stats(ownname=>user,tabname=>'TEST_TABLE');END;Let's see the number of logical I/O's needed for the following SQL statements.
(The value was obtained by the delta ofselect m.value from v$mystat m, v$statname n
where name='session logical reads' and m.statistic#=n.statistic#)
If string lateral is used:
declare
   n number;
begin
select count(*) into n from test_table where my_column='VALUE1';
end;
Consistent Gets: 21
declare
   n number;
begin
select count(*) into n from test_table where my_column='VALUE2';
end;
Consistent Gets: 21
declare
   n number;
begin
select count(*) into n from test_table where my_column='VALUE3';
end;
Consistent Gets: 0Oracle can eliminate the table if it knows the queried value can't satisfy the constraint. Good.
(Actually, the execution plan for the last query included the 'FILTER' operation.)
However, if bind variable is used:
declare
   n number;
   x varchar2(10);
begin
x := 'VALUE1';
select count(*) into n from test_table where my_column=x;
end;
Consistent Gets: 21
declare
   n number;
   x varchar2(10);
begin
x := 'VALUE3';
select count(*) into n from test_table where my_column=x;
end;
Consistent Gets: 21Oracle can't eliminate the table using the constraint. I can understand that because bind variables are used, Oracle can't directly eliminate the table when generating the execution plan. However, is it possible to eliminate the table, or at least employ some shortcut in runtime? If not, will this be a performance loss compared with using values laterals when check constraint exists?
(And is it possible to use autotrace on PL/SQL block in sqlplus?)
Oracle:
     10.2.0.4 SE
     11.2.0.2 SE
OS:
     RHEL5

However, is it possible to eliminate the table, or at least employ some shortcut in runtime? I can't see how to do this. Oracle has a sqltext that has an embedded bind variable in it. And for this sqltext it has an execution plan in the shared pool that will be used irrespective of the actual bound values at runtime.
Maybe in 11G, with adaptive cursor sharing / plan bind awareness, Oracle might be smart enough to introduce a second execution plan for the VALUE3 case.
If not, will this be a performance loss compared with using values laterals when check constraint exists?Only if you submit the dumb query and search for records with VALUE3... Normally your application code would not hold/generate these queries.
Will it?
For columns whose values are bound by a CHECK constraint, one might even consider to never use bind variables, since very likely you will have few versions of queries that use these columns.
Not?
Edited by: Toon Koppelaars on Jun 22, 2011 1:20 PM

Unlink o disable auto windows start when Use fingerprint on Power On

Disbale the "unique start from safe startup"
its located in control center of fingerprint
Message Edited by Belenus on 01-08-2008 01:05 PM

Hi,
You can type "services.msc" in Start >> RUN, and double-click the Oracle Services starting with OracleService<database name> and change the STARTUP TYPE to MANUAL or DISABLED.
While creating a new database, you can also use ORADIM -e -sid <SID> STARTMODE=M at command prompt to do the same.
Hope it helps.
Regards,
Zaffer Khan

Is it possible to specify the window size when using opendocument?

Does anyone know how to specify the window size for a child report launched from a hyperlink that uses opendocument? Is it possible?
I have looked all of the posts I could find and have not found anything that would work, please help.

So I have come up with the following URL based on the suggestions in this post, but it still isn't doing what I would like it to.
It does launch a smaller window but posts the child report in the same window. Is there something else I should do?
Thanks for your help.

Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

I'm using SCVMM managing my Hyper-V machine.
I have three physical network adapter on my hyper-v host as below:
I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
I can access the internet but i got the windows update error as below
If i NAT the internal virtual adapter traffic to the WIFI physical internal facing adapter, windows update is fine.
I'm using my hyper-v server windows NAT feature.
I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
if anyone here can help, that's would be much appreciated.
2013-03-27   18:38:25:627   868   ba4   AU   ## START ## AU: Search for updates
2013-03-27   18:38:25:627   868   ba4   AU   #########
2013-03-27   18:38:25:627   868   ba4   AU   <<## SUBMITTED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:25:627   868   934   Agent   *************
2013-03-27   18:38:25:627   868   934   Agent   ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:25:627   868   934   Agent   *********
2013-03-27   18:38:25:627   868   934   Agent      * Online = Yes; Ignore download priority = No
2013-03-27   18:38:25:627   868   934   Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-03-27   18:38:25:627   868   934   Agent      * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2013-03-27   18:38:25:627   868   934   Agent      * Search Scope = {Machine & All Users}
2013-03-27   18:38:25:627   868   934   Agent      * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
2013-03-27   18:38:25:627   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
2013-03-27   18:38:25:627   868   934   EP   Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
2013-03-27   18:38:25:627   868   934   Setup   Checking for agent SelfUpdate
2013-03-27   18:38:25:627   868   934   Setup   Client version: Core: 7.8.9200.16465 Aux: 7.8.9200.16451
2013-03-27   18:38:25:799   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
2013-03-27   18:38:25:799   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:25:815   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:25:815   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:26:002   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Setup   Skipping SelfUpdate check based on the /SKIP directive in wuident
2013-03-27   18:38:26:002   868   934   Setup   SelfUpdate check completed. SelfUpdate is NOT required.
2013-03-27   18:38:26:440   868   934   PT   +++++++++++ PT: Synchronizing server updates +++++++++++
2013-03-27   18:38:26:440   868   934   PT      + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
2013-03-27   18:38:28:846   868   934   WS   WARNING: Nws Failure: errorCode=0x803d0014
2013-03-27   18:38:28:846   868   934   WS   WARNING: Original error code: 0x80072efe
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error receiving the HTTP reply.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the remote endpoint was terminated.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the server was terminated abnormally
2013-03-27   18:38:28:846   868   934   WS   WARNING: Web service call failed with hr = 80240440.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Current service auth scheme='None'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2013-03-27   18:38:28:846   868   934   WS   FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: PTError: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: Sync of Updates: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncServerUpdatesInternal failed: 0x80240440
2013-03-27   18:38:28:846   868   934   Agent      * WARNING: Failed to synchronize, error = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent      * WARNING: Exit code = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent   *********
2013-03-27   18:38:28:862   868   934   Agent   ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:28:862   868   934   Agent   *************
2013-03-27   18:38:28:862   868   934   Agent   WARNING: WU client failed Searching for update with error 0x80240440
2013-03-27   18:38:28:862   868   598   AU   >>## RESUMED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Search callback failed, result = 0x80240440
2013-03-27   18:38:28:862   868   598   AU   #########
2013-03-27   18:38:28:862   868   598   AU   ## END ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU   #############
2013-03-27   18:38:28:862   868   598   AU   All AU searches complete.
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Failed to find updates with error code 80240440
2013-03-27   18:38:28:862   868   598   AU   AU setting next detection timeout to 2013-03-27 12:38:28
Ricky

some more interesting article i've found so far
http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
Ricky

Is it possible to preset to JPEG High when using 'Save for Web...'?

Hi,
I am using photoshop elements 10. When I am ready to save an image under 'SAVE FOR WEB..' can I preset it to 'JPEG HIGH' cos right now it will pop up 'GIF'.
When I am using PSE2, I am able to launch it as JPEG HIGH. Now, I have to click on the popdown menu to select 'JPEG High'.

You need to right-click on the PSE desktop icon and choose "Run as Administrator".
Then, open a file in PSE, use Save for Web and change all the settings to what you prefer. Hold down the Alt key and the "Done" button will change to a "Remember" button. Click it and then save your image. The settings will be saved and you do not have to run PSE as an administrator again.
Ken

Is it possible to disable DHCP on Airport when using PPPoE?

Similar Messages

Maybe you are looking for