Is it possible to disable the left and right 10% of the screen?

I know that in the home menu, iOS ignores the 20% or so of the margins if your thumb is there, so that you can use another finger to operate it even with a thumb touching the screen.
Is it possible to disable some portion of the screen to touch? Reading a book, etc, would be much more comfortable if I were able to hold the iPad more inward.

How do I make it so that it CAN?

Similar Messages

Is it possible to disable the screen saver for a certain app?

Is it possible to disable the screen saver just while a certain application is running?
The app seems to crash when the screen saver comes on.
Just so you know, application I'm using is Hogwasher; a newsgroup reader.

Not really. Just disable it manually when you run that application. Then, send off a bug report to the app's developer and tell him to update it for the latest Tiger. Alternatively, use another newsgroup reader.

It it possible to have info on the left and right sides of iweb templates?

When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

Hi
You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

Left and right side of screen does not register mouse clicks.

The left and right side of my screen (when maximized) does not register a mouse click. I would estimate about 10 to 15 pixels in (top to bottom) before a button will register a click.
If I work with in firefox not maximized everything works fine. As it stands I have had to add buttons to the left and right side of my Firefox navigation area to utilize the back and home button. I am also not able to use my scroll bar do to this situation with out connecting an external mouse.
Operating system: Windows 7 Professional (64bit)
Resolution 1280x800
Computer: HP TouchSmart tm2 (1070us series)
This laptop does have the touchpad type mouse, I do not think this is the problem though as it will work if firefox is not maximized.
Assistance with this would be appreciated. I Love firefox but this is to much of an annoyance to deal with continually.

Not sure if its ever overheated... I've never left it in a hot car if thats what you mean. Sometimes it gets very hot if I'm using EDGE for a while. I don't push hard which is why I don't think I caused it...
I will bring it in this weekend and see what they say.
I also think that the speakerphone sounds fuzzy and muffled a lot more than it did when I first bought it. So just another reason to bring it in.

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

My kids use firefox on my computer. Is it possible to disable the private browsing feature so they can not go on and use it ?

I want the computer to keep a history of all the site they have searched, but can not know for sure if they turn on/off the private browsing function. Is it possible to disable the private browsing function and put a lock / password on it ?
Thanks,
David

Even if it was possible to remove or disable "Private Browsing" then that still won't make it impossible to delete private data like visited websites (history) or cache or cookies.<br />
There are a lot of ways to clear such data, either via [[Clear Recent History]] or directly by deleting the History in the Library or sidebar.<br />
Private Browsing makes it easier because all data is kept in memory and nothing is saved to disk, so nothing needs to be removed.<br />
<br />
If you want to see which sites have been visited then you should look at others means outside Firefox like a router or firewall with a password protected logging feature that can't be bypassed or a program like Wireshark.
* http://www.wireshark.org/download.html
* http://en.wikipedia.org/wiki/Wireshark
See also:
* http://kb.mozillazine.org/Parental_controls

Is it possible to disable the camera on the nano 2 gen. My grandaughter is in boarding school and no cameras are allowed.

is it possible to disable the camera on a nano 2nd generation? My grandaughter is in boarding school, and they do not allow any form of camera.

Specs for iPod nano 2nd gen > http://manuals.info.apple.com/en_US/iPod_nano_2nd_Gen_Features_Guide.pdf
No camera.

If my iPhone is stolen and the thief shut the phone down, I wouldn't be able to locate it anymore. Is it possible to disable the possibility to shut down the phone when a passcode lock is set up?

If my iPhone is stolen and the thief shut the phone down, I wouldn't be able to locate it anymore.
Is it possible to disable the possibility to shut down the phone when a passcode lock is set up?
enable prohibition shutdown option, with out a jail break tweek
Apple should think about this, if not already in the new IOS 7

No.
The battery will run out sooner or later anyway, even if you could prevent shutdown.
iOS 7 includes a feature that prevents anyone wiping and then re-setting up the phone without your AppleID and password.

Is it possible to disable the minimize, maximize and close on a Frame?

Is it possible to disable the minimize, maximize and close buttons on a Frame?
Is it possible to make invisible, minimize, maximize and close buttons of the frame?
What methods would I use to do so?
Thank You

The minimize, maximize and close buttons are defined as the windows decoration. To disable the windows decoration,frame.setUndecorated(true);The setUndecorated() method can only be called while the frame is not displayable.
Then you can redesign the look and feel of the rootpane and call
frame.getRootPane().setWindowDecorationStyle(JRootPane.FRAME);

Is it possible to disable the webcam toolbar on the Equium A300D

Is it possible to disable the webcam toolbar on the Equium A300D at all? (i.e. just access the webcam controls from the control panel or start menu orsomething).
Where the toolbar is on the left of the screen it's extremely annoying, as every time my mouse strays to the left of the screen, up pops the toolbar.
On a couple of apps I use there are docked app controls on the left of the screen, and when the toolbar pops out, covering half of them up, I have to wait for the toolbar to disappear again, which can be extremely annoying if I'm rushing to do something.
Is there any way to disable it from appearing?

Yes, you can disable the webcam software from automatic loading.
In RUN type *msconfig* and start this tool.
There you will see the tab called Startup. Go to this tab and disable the webcam software (remove the mark).
Then apply the changes and reboot the notebook.
Now the Windows should boot up without the webcam software.
Bye

Is it possible to disable the 'edit layout' link on the record detail page

Is it possible to disable the 'edit layout' link on the record detail page? Not the homepages, I know there is a switch for that, but I thought there was one for the detail pages?
I want to disable this as I dont want users saving their own layouts, they must stick to the related sections defined in the default layout. The problem is that if they are to have access to certain related lists when an opportunity is of a certain type but NOT other types. If they have saved the layout (using the 'Edit Layout' link), and change the record type, they will see related sections that have been set to 'Not available' in the default layout (ie step 4) for that 'type'.

Robbo, at this time it not possible to disable the Edit Layout on the record detail page.

Is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES

greetings all .... is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES . i have this ....................
{ OAMessageTextInputBean bi = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("BI") ;
System.out.println("BI"+bi.getValue(pageContext));
if ((bi.getValue(pageContext)) != null)
{ pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
null,
false, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
System.out.println( "PM");
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
String paramPR = prnum2;
Serializable paramPRParamList[] = { paramPR};
am.invokeMethod("paidManuallyUpdate", paramPRParamList);
System.out.println( " THE VALUE OF THE Cancel RB IS " + canx.getValue(pageContext));
prnum1.setValue(pageContext, "");
pReason1.setValue(pageContext , "");
//either one of these confirmations will work . i use one or the other
throw new OAException("Payment Has Been Updated To Paid Manually", OAException.CONFIRMATION);
//or
OAException msg = new OAException("Updated To Paid Manually", OAException.CONFIRMATION);
pageContext.putDialogMessage(msg);
the problem is if i include the setForwardURL my confirm messages dont work. if i dont include the setForward they work.
is there a way to do the setForwars so i can redirect the page and make the table inactive and also use the confimations. i can see its going past my system.prints. it just isnt popping up my confirmations as i believe its due to the IGNORE_MESSAGES.
any insight ....
cheers.

Hi,
SetForward*()...It lets the current page processing complete. Your following code will complete its processing, after that it will be forwarded to next page.
ForwardImmediately.... Forwards immediately without letting remaining code process.
However, a good thing is pageContext of the same page is forwarded. That means, if you did pageContext.putDialog(message), in current page, that will be forwarded in both the cases to next page. Hence, for your problem...
use putDialog method, as stated in previous post and
use forward url as CONFIRMATION, NOT AS ERROR OR IGNORE_MESSAGE.
pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
null,
false, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAException.CONFIRMATION); //WHAT YOU HAVE PUT IN DIALOGS AND WANT TO SHOW IS CONFIRMATION.
Please try this.
Abdul Wahid

Is it possible to disable the optimized compiler in LabVIEW 2010

Hello,
I have a project that take 3 minutes in LabVIEW 8.6 to build and now with LabVIEW 2010 it take 10.5 minutes. 3x more longer.
In fact my project as 61 .lvproj for a total of 4300 vi's that take 1 hour to build. If I interpolate, the entire build process will take 3 hours in LabVIEW 2010. This is not acceptable
I know that the new compiler optimize the code for better performance, but if I don't need better performance.
Is it possible to disable the optimized compiler in LabVIEW 2010 with an INI key in LabVIEW.ini.
Dany Allard
Dany Allard
Solved!
Go to Solution.

Jarrod S. wrote:
One Application Builder setting you might try out to make builds go much more quickly is the Remove Unused Members of Project Libraries checkbox and the Modify Project Library File after Removi....
This can drastically cut down the build times. Note, however, that this option does not work well if your application will load external plug-in VIs when it runs, because the libraries of those plug-in VIs may conflict with the modified libraries in the executable file. If you don't have a plug-in architecture, this will not affect you.
The "Remove unused members of project libraries" was already selected but not the "Modify project library file after removing unused members" and selecting this cut the build time from 10.5 min to 4 min.
Thank you Jarrod for this tips
Dany
Dany Allard

How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

myocom,
You can highlight random points in DIAdem as well.
Here is an example:
Use the cursor to move to the point you wish to highlight.
Press the "Set Data Point and Flag" icon on each data point you wish to highlight
When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Report with highlights.zip ‏5 KB

Is it possible to disable the magic mouse scrolling in windows 7?

I've partitioned my hard drive with bootcamp to run windows 7 for a handful of games that aren't mac friendly. The problem is that once I installed the drivers to use the magic mouse, the scroll keeps jumping around at inconvenient times while I'm playing which makes it pretty difficult. How can I turn the scrolling off? I like having the scroll on the trackpad, but I only want the left and right click on the mouse.

I use MagicMouse on iMac with Windows 7 running (installed through BootCamp). Got sick of annoying horizontal scrolling. The solution described above has helped me to disable it. Here is what I've done in steps:
1) go to http://www.autohotkey.com/ and download an app (a script editor).
2) Install and run the program - please note that it will not open as it runs in the background
3) Rightclick on the desktop -> choose "New" -> "AutoHotkey Script" (a new script file will be created on the desktop) -> name it as you wish (e.g. "Mouse_HScroll")
4) Rightclick on the file you've just created and choose "Edit Script" from the menu.
5) Add these three lines below existing text in the file:
WheelLeft::return
WheelRight::return
#MaxHotkeysPerInterval 5000
6) Save file
7) Run "Convert .ahk to .exe" program from the package installed earlier and browse the file you've just created, hit ">Convert<" -> .exe file should be created. Run this file -> the scrolling should be disabled now.
7) You may wish to move this file to Start/"Autorun" folder, so it would be launched automatically each time you reboot your Mac/PC.
Hope this helps! Good Luck

Is it possible to disable the left and right 10% of the screen?

Similar Messages

Maybe you are looking for