Is it possible to disable the user acces to online adobe cloud store services?

Hello, i need to know if it is posible to disable the cloud storage options to a designed user
Thank you

TThanks for the info.
CAn can you elaborate on how I would set up a security policy.  Is it with a GPO?
thank you.

Similar Messages

  • Is it possible to disable the users ASGADM DEVELOPER and IBE ADMIN?

    need to know if they can be inactivated system users (ASGADM DEVELOPER and IBE ADMIN)
    We need to know what they are used and if they do not cause any problems with its inactivation
    we have EBS 11.5.10.2

    971780 wrote:
    need to know if they can be inactivated system users (ASGADM DEVELOPER and IBE ADMIN)
    We need to know what they are used and if they do not cause any problems with its inactivation
    we have EBS 11.5.10.2
    Please see:
    Secure Configuration Guide for Oracle E-Business Suite 11i (Doc ID 189367.1)
    Is it Safe To End Date Some Applications Users like GUEST ? (Doc ID 783428.1)
    Thanks,
    Hussein

  • Is it possible to disable the 'edit layout' link on the record detail page

    Is it possible to disable the 'edit layout' link on the record detail page? Not the homepages, I know there is a switch for that, but I thought there was one for the detail pages?
    I want to disable this as I dont want users saving their own layouts, they must stick to the related sections defined in the default layout. The problem is that if they are to have access to certain related lists when an opportunity is of a certain type but NOT other types. If they have saved the layout (using the 'Edit Layout' link), and change the record type, they will see related sections that have been set to 'Not available' in the default layout (ie step 4) for that 'type'.

    Robbo, at this time it not possible to disable the Edit Layout on the record detail page.

  • Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

    Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

    There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.

  • Is it possible to disable the PREV button?

    I need to prevent people from navigating back to the previous page. Is it possible to disable the PREV button?

    It is clear now that choices made are remembered - even when you navigate back and follow another path - until the form is submitted. Indeed, the response table only shows the valid choices. I can see a number of reasons why this was implemented in the way it is because it is less frustrating for a user has completed the responses on a page, but is navigating back and then returns on that page with all the choices made remembered. However, as a forms creator you need to be aware of this and add aditional rules to prevent double or wrong actions as a result of "just remembered" choices. And that is what I did to solve the problem, I added additional rules.
    Thanks for the help!

  • Is it possible to disable the password history parameter?

    Hello,
    We are using NW04s
    Is it possible to disable the password history parameter completely? The current value can be between 1 and 100 only.

    Hmmm,
    since >90% of the users will try to enter their old password (which will be accepted without password history), I think it won't make much of a difference to not asking them
    Anyway, may be you take a look at table USR02 as old passwords appear here. Idea is to write a report which clears the old entries... But to fiddle around with passwords is a very special thing...so it's just an idea...
    Over and out,
    Peter
    Points always appreciated

  • Is it possible to disable the Force closur button from QE11?

    Hi
    Is it possible to disable the Force closur button from QE11 transaction code level?
    Thanks and Regards
    GVD

    Hello Chanti,
    Disabling the force closure button is not possible by creating a security role as security restrictions work on organizational elements like co codes, plant, s loc etc.
    Could you please let me know if the requirement is for all users or few users.
    Also you may want to try the transaction variant/ Screen variant option. The force button is available in program SAPLQEEM and Function ABFO which you need to tick the inactive button during recording. Take help from ABAP if required.
    Thanks
    Sahil

  • Is that possible to display the user selection data in the printable page?

    Hi All,
    I'm going to add a printablepage button on my page.
    Here comes a questions.
    Is that possible to display the user selection data in the printable page?
    For example,
    I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
    Please help.

    Hi Yannick,
    Thanks a lot for the information. It worked.
    The portlet data can be accessible using bindings, but parameter name can be different.
    Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
    Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
    Is this possible? If yes can you please let me know the steps?
    Thanks in advance!
    Somnath
    Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

  • Is it possible to allow the user to highlight specific label in the GUI.

    i have an existing GUI tt allows user to key in records of information eg, patient records in a hospital system.
    and display them based on wat the user key in for the patient's id no:
    is it possible to allow the user to highlight label in the GUI.
    Label as in information like Illness:<Red>Cancer<Red>
    for tt customer only.
    and re open the file to have the color still there.
    i serialized my vector of objects into a file, and have the gui to retrieve them upon execution.
    color wise i m lost.
    one solution is to have a corresponding Color attribute to each of my other attribute in all my other classes.
    besides this, any idea how to do it?
    i also did a search on java map..
    couldn't really find sth useful abt it..
    seems like few ppl know how to use it well..
    API doesn't seems to show how i can use it to reach my objective.
    anyway, i hope the user can highlight A attribute of a record and not highlight the entire record..
    tt's why i find it soo cumbersome to have another Color object created for each atttribute.
    eg:
    patientId, patientName, etc.....
    thanks in advance

    Several Swing components understand HTML tags, eg JLabel, which is VERY useful, as in the previous example.
    Are you asking "how do I highlight a field" or "how do I make it remember the color it has"?
    As Color is itself Serializable, why not store your data in a Hashtable not a Vector?

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes in DRM?

    When in a hierarchy, a user right clicks on a node to crate a new node, he has two options
    -Child
    -Sibling
    Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes?
    Business cases:
    1. different level nodes need to have different prefixes.
    - Thus, the default prefix property definition uses the level number to assign a prefix
    - Also, a validation, to ensure the correct prefix, uses the level number
    But if the user can create a child and a sibling then the default prefix will only be right for a single case and not both.
    Thanks

    If the images are exactly the same size then make sure the layer with the mask
    is the active layer and in the other documents go to Select>Load Selection and choose
    your document with the layer mask under Source document and under channel choose the layer mask.
    After the selection loads press the layer mask icon at the bottom of the layers panel.
    MTSTUNER

  • Is it possible to disable the screen saver for a certain app?

    Is it possible to disable the screen saver just while a certain application is running?
    The app seems to crash when the screen saver comes on.
    Just so you know, application I'm using is Hogwasher; a newsgroup reader.

    Not really. Just disable it manually when you run that application. Then, send off a bug report to the app's developer and tell him to update it for the latest Tiger. Alternatively, use another newsgroup reader.

  • I recently lost my iphone 4 and have an iphone3 on loan until I get upgrade in Aug.  I want to sync my data - contacts most important  - from my itunes account...is this possible?  Is it possible to change the user ID on the borrowed phone to my ID?

    I recently lost my iphone 4 and have an iphone3 on loan until I get upgrade in Aug.  I want to sync my data - contacts most important  - from my itunes account...is this possible?  Is it possible to change the user ID on the borrowed phone to my ID?

    There are no contacts in itunes.
    Your contact should be on your computer in whatever program you have selected to sync.  Just sync them to the new one.
    Click Support at the top of this page, then click manuals
    Changing the itunes account on nthe iphone is covered there as is restoring the iphone as new or from backup.

  • Is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES

    greetings all .... is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES . i have this ....................
    {                  OAMessageTextInputBean bi = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("BI") ;
    System.out.println("BI"+bi.getValue(pageContext));
    if ((bi.getValue(pageContext)) != null)
    {                pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
    null,
    false, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
    OAWebBeanConstants.IGNORE_MESSAGES);
    System.out.println( "PM");
    OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
    String paramPR = prnum2;
    Serializable paramPRParamList[] = { paramPR};
    am.invokeMethod("paidManuallyUpdate", paramPRParamList);
    System.out.println( " THE VALUE OF THE Cancel RB IS " + canx.getValue(pageContext));
    prnum1.setValue(pageContext, "");
    pReason1.setValue(pageContext , "");
    //either one of these confirmations will work . i use one or the other
    throw new OAException("Payment Has Been Updated To Paid Manually", OAException.CONFIRMATION);
    //or
    OAException msg = new OAException("Updated To Paid Manually", OAException.CONFIRMATION);
    pageContext.putDialogMessage(msg);
    the problem is if i include the setForwardURL my confirm messages dont work. if i dont include the setForward they work.
    is there a way to do the setForwars so i can redirect the page and make the table inactive and also use the confimations. i can see its going past my system.prints. it just isnt popping up my confirmations as i believe its due to the IGNORE_MESSAGES.
    any insight ....
    cheers.

    Hi,
    SetForward*()...It lets the current page processing complete. Your following code will complete its processing, after that it will be forwarded to next page.
    ForwardImmediately.... Forwards immediately without letting remaining code process.
    However, a good thing is pageContext of the same page is forwarded. That means, if you did pageContext.putDialog(message), in current page, that will be forwarded in both the cases to next page. Hence, for your problem...
    use putDialog method, as stated in previous post and
    use forward url as CONFIRMATION, NOT AS ERROR OR IGNORE_MESSAGE.
    pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
    null,
    false, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
    OAException.CONFIRMATION); //WHAT YOU HAVE PUT IN DIALOGS AND WANT TO SHOW IS CONFIRMATION.
    Please try this.
    Abdul Wahid

  • Is it possible to disable the optimized compiler in LabVIEW 2010

    Hello,
    I have a project that take 3 minutes in LabVIEW 8.6 to build and now with LabVIEW 2010 it take 10.5 minutes. 3x more longer.
    In fact my project as 61 .lvproj for a total of 4300 vi's that take 1 hour to build. If I interpolate, the entire build process will take 3 hours in LabVIEW 2010. This is not acceptable
    I know that the new compiler optimize the code for better performance, but if I don't need better performance.
    Is it possible to disable the optimized compiler in LabVIEW 2010 with an INI key in LabVIEW.ini.
    Dany Allard
    Dany Allard
    Solved!
    Go to Solution.

    Jarrod S. wrote:
    One Application Builder setting you might try out to make builds go much more quickly is the Remove Unused Members of Project Libraries checkbox and the Modify Project Library File after Removi....
    This can drastically cut down the build times. Note, however, that this option does not work well if your application will load external plug-in VIs when it runs, because the libraries of those plug-in VIs may conflict with the modified libraries in the executable file. If you don't have a plug-in architecture, this will not affect you.
    The "Remove unused members of project libraries" was already selected but not the "Modify project library file after removing unused members" and selecting this cut the build time from 10.5 min to 4 min.
    Thank you Jarrod for this tips
    Dany
    Dany Allard

Maybe you are looking for

  • Events View in iPhoto '08

    When I go to the Events view in iPhoto '08 about half of my events groups do not show the key photos. Similarly, when you drag the mouse across the front of the event window in some instances no photos appear, in others only half appear and the rest

  • How to view semantic css based layouts in design view in dreamweaver?

    Hi all, I havent had a lot to do with CSS based layouts (tables have alwasy just worked for me fine) but I am wondering how do I view the semantic/css based layout in design view in Dreamweaver? As when I write the code, in design view its not showin

  • My MBP 15 inch can't switch off (freeze at blue screen with spinning wheel)

    Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem? I tried booting from the installation disk and repairing disk with "disk utilit

  • Very large webpages turn into a black screen halfway down

    When reading a very large web document, it will suddenly turn black when scrolling down. If the page style is set to 'basic style', it shows this problem. If the page style is set to 'no style', the problem does not show. See attachments for above on

  • E-Recruiting External Candidate login

    Hi, I've got a problem with the external candidate login. System requires a logon prompt instead of taking me directly to the start page. I've got the RCF_UNREGSER service user set up. I DO NOT have this user assign to the HRRCF_START_EXT service. I