Is it possible to display a Bottom 10 on a key figure on values 0 only?

Hi
Is it possible using BEx Query Analyser to display a bottom 10 based on key figure values greater than 0?
I can create a condition which has the Bottom 10 on a Sales Qty key figure, but my problem is that this key figures includes some values of zero and negative values, I want to ignore these.
I have tried creating another condition, values > 0.  This works on it's own but not with the Bottom 10. 
I appreciate a possible solution would be to do this in data provider but we do not have access to this in our new environment.
Any responses appreciated, thanks in advance
        Lloyd  Bower

Arun,
Thanks for the reply, unfortunately your suggestion produces the same effect as one of my original ideas (two seperate conditions on same key figure).  i.e. it only reports those in the original bottom 10 with have a Key figure qty of >0,
e.g. 3 records, as the other of the original bottom 10 have a key figure qty of 0 or a minus figure.
I'm wanting to achieve a bottom 10 of those records with a key figure above zero.
There are sufficient records in my data with a key figure above 0, for a bottom 10 to be reported.

Similar Messages

  • Display technical names of restricted key figures

    Hi everybody,
    In a query, I would like to display the technical names of restricted key figures instead of their description as a heading. Is that possible and how can I do this?
    Thank you for any help, regards, Kathrin!

    Hi Kathrin,
    I believe you can do this in only one query.In the query you want to have the technical name ..Rigth click>properties> description will change the name of the field only in that specific query..not for all the queries..
    Else you can run the query and make changes in workbook format..Even this should serve the purpose..
    Ashish.

  • Display Problem with the Key Figures

    Hi,
    I working on the query where i need to display three Key Figures. I have no problem with the first two Key Figures , but the third Key figure values need to be display by day wise. (0Calday). i.e., the third key figure value should be displayed  based no of days 0Calday has.
    For Example if 0Calday is holding 4 days... then third keyfigure  Value should be display as 4 columns with their respective values by dividing into day wise, remaining first two key figures should not be changed.
    When i am trying to call the 0Calday into the Column, all the three Key Figures values are displaying as many as no of days 0calday has.
    For Example if 0Calday has 2 day....the three Key Figures are values are breaking into two days values and displaying, so totally we can see 6 Key figure values.  But i need first two values should not break but the last key figure should be divide into two days as values and display.
    Thanks & Regards
    Agama.

    Hi Venkat
    This can be achieved by supressing 0 values.
    1) In the Query Designer: Go toquery properties
    2) Select Suppress Zeros
    3) Select option Active
    4) Under Effect On : try with Column or row o (Not infront of system , so cannot exactly remember)
    This will allow you to get the  exact result as per your requirement. We had the same issue and we could resolve this by following this.
    Hope it helps.
    Cheers

  • Is it possible to display a TickLabel on minor tick marks?

    I am trying to figure out whether it is possible to display a label on minor tick marks in a LineChart. I can't immediately gleam from the NumberAxis > ValueAxis > Axis javadoc how / if this could be possible to do. Tried experimenting a bit with making my own custom Axis class seeing if anything would pop when I started overriding methods, but no, not really.
    The issue I'm trying to solve is having the minor tick marks labeled on the chart when it is zoomed in. Currently, if I zoom in on a region contained between two major tick marks, there will be no axis labels at all (except the bottom left corner), which is unacceptable. I need to be able to label those minor ticks at some level of zoom to make the chart more readable.
    If anybody have any ideas on how to proceed with this problem, greatly appreciated.

    Bump. Is there any resolution for this issue?

  • Is it possible to display keyfigures in italics format in report output

    Hi All,
    Is it possible to display keyfigures in italics and bold format in report output?
    Thanks,
    Sri Arun Prian

    you can edit the CSS - there is a CSS class assigned to the key figures.... this is for WAD....
    Edited by: Arun Varadarajan on Feb 5, 2009 2:43 PM

  • Is it possible to display only dynamically selected fields in the out put?

    Is it possible to display only dynamically selected fields in the out put? i need to display set of columns in the selection criteria, but in the output i have display only input given fields. because i need to convert it into .csv file. So i have to display selected fields from internal table. In oracle they are using"execute immediate". is there any equivalent in SAP?
    thanks in advance.

    Hi Remya,
    Are you talking about dynamic programming in ABAP ?
    If yes, there are concepts like RTTS which facilitates it.
    Yes, the select query also supports dynamic selection of fields. ( Please care about ( ) in dynamic sql ).
    Do more research on Field Symbols and statements like ASSIGN COMPONENT OF.
    Regards,
    Philip.

  • Is it possible to display Suffix values in ALV Report

    Hi,
    Is it possible to display a suffix value in the output of ALV Report? If so how I can proceed? Please let me know an example.
    Thanks,
    Sekhar.J

    Hi Siddarth,
    I am sorry for the typo. It shold be Sub Script, Not a Suffix.
    Let  us take an example H2O, If we print it in this way it won't be meaning full, So i want to display this like
    H Subscript 2 O. I have a requirement for a column to always to display this kind of values, Is it Possible?
    Thanks,
    Sekhar.J

  • Is it possible to display LOGO in simple ALV list?

    Hi Guys,
    Is it possible to display LOGO in simple ALV list. If yes plz explain in details.
    Thanks
    Sharat

    Yes it is possible to display logo at the top of the page.
    TYPE-POOLS: slis.
    *     Data Decalaration
    DATA: it_vbak TYPE TABLE OF vbak.
    DATA: g_repid TYPE sy-repid.
    DATA: it_listheader TYPE slis_t_listheader,
           wa_listheader TYPE slis_listheader.
    *     START-OF-SELECTION
    START-OF-SELECTION.
       g_repid = sy-repid.
       SELECT * FROM vbak INTO TABLE it_vbak.
       PERFORM build_alv_header.
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           i_callback_program     = g_repid
           i_callback_top_of_page = 'TOP_OF_PAGE'
           i_structure_name       = 'vbak'
         TABLES
           t_outtab               = it_vbak.
    *&      Form  BUILD_ALV_HEADER
    FORM build_alv_header .
    *  Type H is used to display headers i.e. big font
       wa_listheader-typ  = 'H'.
       wa_listheader-info ='Flight Details'.
       APPEND wa_listheader TO it_listheader.
       CLEAR wa_listheader.
    *  Type S is used to display key and value pairs
       wa_listheader-typ = 'S'.
       APPEND wa_listheader TO it_listheader.
       CLEAR wa_listheader.
    *  Type A is used to display italic font
       wa_listheader-typ = 'A'.
       wa_listheader-key = 'Date    :' .
       wa_listheader-info ='SAP ALV Report'.
       APPEND wa_listheader TO it_listheader.
       CLEAR wa_listheader.
    ENDFORM.                    " BUILD_ALV_HEADER
    *&      Form  top_of_page
    FORM top_of_page.
       CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
         EXPORTING
           it_list_commentary = it_listheader
           i_logo         = 'PARI'.
    ENDFORM.                    "top_of_page

  • Is is possible to display quantity field in FBU3?

    Hi,
    Is it possible to display the quantity field in FBU3? We have activated the quantity field for FBL3N but not able to find the configuration to do it for FBU3.
    Please guide.

    Good Morning Everybody,
    The above question still continues...
    {Please Answer}

  • Is it possible to display the static numerals as Hindi?

    Trying to generate a report using XML Publisher, the report composed of two columns.
    Need to display the numerals in English language coulmn in Arabic numerals and the numerals in Arabic language column in Hindi numerals. Currently they both appear as Arabic numerals in both columns
    Question:
    Is it possible to display the static numerals as Hindi as they had been
    entred in the template or not?
    I understood that on generation these should be variables not static.
    I would welcome any input on this issue.
    Many thanks

    Hmm,
    In templates i guess, you can use multiple font text ..
    same is the case here..
    Arabic and hindi, are you using different font for these ?
    if so, are these fonts available in server too ?
    The test displayed can be static or dynamic, but if the server doesn't know which font to be applied, then its going to apply default font for the text.
    At runtime, the server has to known, for this text which font has to be applied. if this has to happen, font has to be understood by server.

  • Is possible to display Country Name in incoming calls?

    Is possible to display Country Name in incoming calls? If number is saved with country code. Attached is the sample as i mean.

    If you need one more column, then you need to expand the field catalog table and data table as you did for all other fields and you need to code the logic to calculate the subtotals and populate the new column, but if you want to have row, that will be easy. For more info you can [refer |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4063c42a-2549-2c10-fab6-a8c99d98b9b5?quicklink=index&overridelayout=true]this:

  • Is that possible to display the user selection data in the printable page?

    Hi All,
    I'm going to add a printablepage button on my page.
    Here comes a questions.
    Is that possible to display the user selection data in the printable page?
    For example,
    I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
    Please help.

    Hi Yannick,
    Thanks a lot for the information. It worked.
    The portlet data can be accessible using bindings, but parameter name can be different.
    Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
    Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
    Is this possible? If yes can you please let me know the steps?
    Thanks in advance!
    Somnath
    Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

  • Is it Possible to display the output of the ALV list as POP-UP

    Hi Experts,
                     Is it Possible to display the output of the ALV list as POP-UP, if yes then provide some ideas on it.
    thanking in advance,
    Samad.

    Hi samad, it is possible to display alv list as pop-up by using the FM " REUSE_ALV_POPUP_TO_SELECT"
    try this sample code
    CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
          EXPORTING
       I_TITLE                       =  P1_TITLE
           I_SELECTION                   = 'X'
           I_ZEBRA                       = 'X'
      I_CHECKBOX_FIELDNAME          =
      I_LINEMARK_FIELDNAME          =
      I_SCROLL_TO_SEL_LINE          = 'X'
            I_TABNAME                     = 'T_VBAP'
           I_STRUCTURE_NAME              =  'T_VBAP'
           IT_FIELDCAT                   =  T_FCAT2
           I_CALLBACK_PROGRAM            = 'ZTEST_ALV_POPUP'
       IMPORTING
           ES_SELFIELD                   = I_SELFIELD
           E_EXIT                        = W_EXIT
          TABLES
            T_OUTTAB                      = T_VBAP.
    i think it will solve your problem
    Regards,
    Vijay

  • Is it possible to display the entire list in Background ?

    Hi all,
    I have alv report(Oops) , it is grid display and having more than 300 columns , when i execute that report in background i am getting only 132 columns and 65 lines per page, Is it possible to display the entire list , If it is possible then how we can do that? if it is not what is the reason? .
    Thanks in Advance.

    Hi,
    If use Grid in BG u will get o/p In ALV List Itself, second thing is u will get Croped o/p bcos of Print Format 65255 , in this case u have to create/change a new Print Format only for BG jobs like 651000.
    for more info ask ur basis person to create a new print formats in such cases.
    Regards,
    shiva.

  • Is it possible to display the document link for each record  in Report ?

    Hi,
         Is it possible to display the document or Image link for each master record in the Report  with the help of RSA1->Document->Master Data.
    Usefull answers are really helpfull.
    Advance Thanks for the userful answers.
    Regards,
    MRC.

    Hi  JAYASHREE PARASMAL ,
          Thanks for your valuable answers.
          Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
          But i can't able to get the same thing,while i executing the Repory through WAD.
          What setting i need follow in the WAD for getting the same thing.
          Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
          Once again thanks for your helpful answer and awaiting for your suggestion.
    Regards,
    MRC.

Maybe you are looking for