Is it possible to display the values of variables in the "Process Success"

Process Success Message location?
I have a single page which allows two different things which might be accomplished depending on what the user does. I'd like to give a confirmation message to the user as to what it is they just successfully accomplished.

Ok I see. I should use &var.
Edited by: xerosaburu on Aug 18, 2009 11:37 AM

Similar Messages

  • Is it possible to display default values in input ready query.

    Hi Guys,
    Is it possible to display default values in input ready query.

    HI,
    Select the particular Variable.....in the right hand side u will find the default values tab....in that u can give the values...and save...if u run the query then it will show the default values for that Variable.selection....
    Thanks/Tarak

  • Is it possible to display the static numerals as Hindi?

    Trying to generate a report using XML Publisher, the report composed of two columns.
    Need to display the numerals in English language coulmn in Arabic numerals and the numerals in Arabic language column in Hindi numerals. Currently they both appear as Arabic numerals in both columns
    Question:
    Is it possible to display the static numerals as Hindi as they had been
    entred in the template or not?
    I understood that on generation these should be variables not static.
    I would welcome any input on this issue.
    Many thanks

    Hmm,
    In templates i guess, you can use multiple font text ..
    same is the case here..
    Arabic and hindi, are you using different font for these ?
    if so, are these fonts available in server too ?
    The test displayed can be static or dynamic, but if the server doesn't know which font to be applied, then its going to apply default font for the text.
    At runtime, the server has to known, for this text which font has to be applied. if this has to happen, font has to be understood by server.

  • Is that possible to display the user selection data in the printable page?

    Hi All,
    I'm going to add a printablepage button on my page.
    Here comes a questions.
    Is that possible to display the user selection data in the printable page?
    For example,
    I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
    Please help.

    Hi Yannick,
    Thanks a lot for the information. It worked.
    The portlet data can be accessible using bindings, but parameter name can be different.
    Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
    Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
    Is this possible? If yes can you please let me know the steps?
    Thanks in advance!
    Somnath
    Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

  • Is it Possible to display the output of the ALV list as POP-UP

    Hi Experts,
                     Is it Possible to display the output of the ALV list as POP-UP, if yes then provide some ideas on it.
    thanking in advance,
    Samad.

    Hi samad, it is possible to display alv list as pop-up by using the FM " REUSE_ALV_POPUP_TO_SELECT"
    try this sample code
    CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
          EXPORTING
       I_TITLE                       =  P1_TITLE
           I_SELECTION                   = 'X'
           I_ZEBRA                       = 'X'
      I_CHECKBOX_FIELDNAME          =
      I_LINEMARK_FIELDNAME          =
      I_SCROLL_TO_SEL_LINE          = 'X'
            I_TABNAME                     = 'T_VBAP'
           I_STRUCTURE_NAME              =  'T_VBAP'
           IT_FIELDCAT                   =  T_FCAT2
           I_CALLBACK_PROGRAM            = 'ZTEST_ALV_POPUP'
       IMPORTING
           ES_SELFIELD                   = I_SELFIELD
           E_EXIT                        = W_EXIT
          TABLES
            T_OUTTAB                      = T_VBAP.
    i think it will solve your problem
    Regards,
    Vijay

  • Is it possible to display the entire list in Background ?

    Hi all,
    I have alv report(Oops) , it is grid display and having more than 300 columns , when i execute that report in background i am getting only 132 columns and 65 lines per page, Is it possible to display the entire list , If it is possible then how we can do that? if it is not what is the reason? .
    Thanks in Advance.

    Hi,
    If use Grid in BG u will get o/p In ALV List Itself, second thing is u will get Croped o/p bcos of Print Format 65255 , in this case u have to create/change a new Print Format only for BG jobs like 651000.
    for more info ask ur basis person to create a new print formats in such cases.
    Regards,
    shiva.

  • Is it possible to display the document link for each record  in Report ?

    Hi,
         Is it possible to display the document or Image link for each master record in the Report  with the help of RSA1->Document->Master Data.
    Usefull answers are really helpfull.
    Advance Thanks for the userful answers.
    Regards,
    MRC.

    Hi  JAYASHREE PARASMAL ,
          Thanks for your valuable answers.
          Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
          But i can't able to get the same thing,while i executing the Repory through WAD.
          What setting i need follow in the WAD for getting the same thing.
          Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
          Once again thanks for your helpful answer and awaiting for your suggestion.
    Regards,
    MRC.

  • How can I display SQL%ROWCOUNT in the "Process Success Message"

    Hi all;
    I am trying to display SQL%ROWCOUNT in the "Process Success Message" of a custom update Process.
    Any ideas?

    Chris,
    I assume,
    ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID );
    is a package / procedure you call to do something. Change the procedure and add an
    out parameter to it, which will get the
    SQL%ROWCOUNT
    value. Then, call this package like this:
    DECLARE
      in_DEPARTMENT_UID NUMBER;
    BEGIN
      in_DEPARTMENT_UID := :P4_DEPARTMENT_UID;
      ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID,  :P4_ROW_COUNT );
    END;Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Is it possible to automate the process...?

    Dear members!
    Is it possible to automate the process of subtitling? For example if I have MS Word file with the following table:
    Starting Timecode
    Ending Timecode
    Language of Original
       Local       Language   
    0001
    00:00:06:00
    00:00:06:01
    0002
    00:01:10:18
    00:01:12:02
    0003
    0004
    Is there any way to put that file on timeline in Premiere to superimpose subtitles with dialogues (for example) of Original Language? Can anyone give me step-by-step instruction on how to do that? I can edit text file in MS Word and delete unneeded column. Manual making of a few thousand titles is so boring!
    As a result I have to export AVI file with superimposed subtitles on screen.
    Thanx in advance to everybody!

    I believe that using After Effects is a lot easier because you can change the source text with keyframes.
    Take a look at this thread and watch the tutorial I did to demonstrate this.
    http://forums.adobe.com/message/4770932#4770932

  • Is it possible to display Suffix values in ALV Report

    Hi,
    Is it possible to display a suffix value in the output of ALV Report? If so how I can proceed? Please let me know an example.
    Thanks,
    Sekhar.J

    Hi Siddarth,
    I am sorry for the typo. It shold be Sub Script, Not a Suffix.
    Let  us take an example H2O, If we print it in this way it won't be meaning full, So i want to display this like
    H Subscript 2 O. I have a requirement for a column to always to display this kind of values, Is it Possible?
    Thanks,
    Sekhar.J

  • Is it possible to display the content of complex mutlidimensional datastructures (e.g. std::vectors (dim = 2) of (non-primitive) types) in Xcode debugger?

    Hi,
    First, let me say that I like Xcode and coding in OS X. However, there is something I miss:
    Let me demonstrate what i mean:
    This is the representation of a 2D-Vector in Xcode Debugging environment:
    v          'std::vector<std::vector<int, std::allocator<int> >, std::allocator<std::vector<int, std::allocator<int> > > >'          [{...}]
    0          'std::vector<int, std::allocator<int> >'          [{...}]
    1          'std::vector<int, std::allocator<int> >'          [{...}]
    2          'std::vector<int, std::allocator<int> >'          [{...}]
    3          'std::vector<int, std::allocator<int> >'          [{...}]
    4          'std::vector<int, std::allocator<int> >'          [{...}]
    5          'std::vector<int, std::allocator<int> >'          [{...}]
    6          'std::vector<int, std::allocator<int> >'          [{...}]
    7          'std::vector<int, std::allocator<int> >'          [{...}]
    8          'std::vector<int, std::allocator<int> >'          [{...}]
    So, the above representation is what I would call bad (even useless).
    The problem is that the current Linux Kernel (3.1.1) has some problems with the new MBA 2011 (which is really sad) so I can not show you the representation of a 2D-Vector in Qt-Creator for Linux right now (I'm not sure if the Qt-Creator for OS X could display the content properly, since I've never tried it). But you can believe me, that the represantation would look something like the one in Eclipse (which would be a good representation).
    So my question: is there a "fix" for this?

    What you want is a custom data formatter. I would give you some links, but my iPad wants to convert them into the documentation viewer.
    You aren't going to find much help with C++ debugging. While Apple's Clang has made great improvements in C++ support compared to GCC, C++ is really not something that Mac or iOS programmers typically use. The Cocoa containers and objects are so much more versatile. You kind of have to have a masochist streak and a 7 year development schedule to use C++. C++ is experiencing a bit of a resurgence, especially in defense markets. For a long time, compilers had such poor support for C++ that it just wasn't possible. After simplifying the language a little, compilers can now compile and link C++. Consultants have realized they can provide C++ services and burn though billable hours better than any other language on the market. Independent developer, however, don't have those schedules and budgets so they tend to use NSArray. Xcode supports it better in the debugg and, chances are, you don't need to debug it anyway. There are a number of matrix classes built on Cocoa.

  • Is there any possible to display the text in big font in screen painter

    HI all!
    i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me reply

    HI
    CALL METHOD o_dyndoc_id->initialize_document
          EXPORTING
            background_color = cl_dd_area=>col_tree_level1.
        DATA : dl_text(255) TYPE c.  "Text
        CALL METHOD o_dyndoc_id->add_text
          EXPORTING
            text         = 'Flight Details'
            sap_style    = cl_dd_area=>heading
            sap_fontsize = cl_dd_area=>large
            sap_color    = cl_dd_area=>list_heading_int.
    * Display document
        CALL METHOD o_dyndoc_id->display_document
          EXPORTING
            reuse_control      = 'X'
            parent             = cont
          EXCEPTIONS
            html_display_error = 1.
        IF sy-subrc NE 0.
        ENDIF.
    by using these methods you can achieve i hope..
    have a good day.
    regards
    sarves

  • Is it possible to display the size of a folder in a cell??

    Hi,
    i would like to know if there is any way or function to assign to a cell for display for example the size of a folder on the hard drive.....
    so whenever the folder size is changing, the cell is updated......
    another example, is to display the number of files inside a specific folder......
    Any way to do this????
    Thanks for your precious help.
    Marco

    Hi everybody,
    i did some step forward, but i'm blocked in a step....
    this is the script I build so far:
    tell application "Finder"
              if disk "Data" exists then
                        set peso010 to get physical size of folder "010 - Foto" of disk "Data"
              else
                        set peso010 to 0
              end if
              tell application "Numbers"
                        open "/Users/asialimarco/documents/test.numbers"
                        set the value of cell "B2" to peso010
              end tell
    end tell
    The first portion is getting correctly the size of my folder on external drive, a value when the disk is plugged in, 0 when is not.
    The second portion is where i get an error. It does open Numbers, it does open my file, it selects (the blue square) the right cell, but doesn't write on it anything. The Apples script returns an error which is:
    error "Numbers founds an error: Can't set cell \"B2\" at 0." number -10006 from cell "B2"
    I tried many times by also setting the value of the variable manually, but the error is always the same.
    What I'm missing? why i can't write on that cell (or anyother), with the on-line documentation it semas i need to open the file with write permissions, but i can't figure out how to do that.
    Anyone can help me?
    Thanks to all of you.

  • Possible to display domain value range descriptions rather than values?

    Hi All,
    We're using ECC6.
    I have a context input field on my view, which is  bound to a data type that is bound to a domain.  The values are brought back from the domain automatically but when the user selects a row, the fixed value is displayed rather than the description, i.e. the code for the value is displayed rather than the short description.
    This is not acceptable.  Before I go off and code something for this instead is there a parameter I can set to tell it to display the description rather than the code.
    Many thanks,
    Liz.

    HI Liz,
    You can read the domain name i guess, then you can use the Function Module DD_DOMVALUES_GET, make the call as
    CALL FUNCTION 'DD_DOMVALUES_GET'
           EXPORTING
                domname        = i_dom_name
                text           = 'X'
                langu          = sy-langu
           IMPORTING
                rc             = lv_rc
           TABLES
                dd07v_tab      = t_dd07v
           EXCEPTIONS
                wrong_textflag = 1
                OTHERS         = 2.
    you should get the short description in the field ddtext of result t_dd07v.
    Now instead of creating a domain you can provide these values to the valid values for your context dynamically.
    Hope this helps.
    Regards
    Vineet

  • HT5557 Is it possible to display the title of the book or PDF when viewing them in the library? I can only see a title if my PDF's first page contains the title.

    I would like to be able to display the title of the PDF or book while in library mode. In iTunes, you can click and hold on the song to get the full title information. I would like to see the same feature in iBooks if it doesn't already exist.

    You can omit the title altogether in the URL (together with the succeeding slash, of course). For example, my own podcast URL in the Store is
    https://itunes.apple.com/gb/podcast/the-sound-of-78s/id166389425?mt=2
    but this works perfectly well:
    https://itunes.apple.com/podcast/id166389425
    Indeed you can even put your own title:
    https://itunes.apple.com/podcast/any_old_title/id166389425
    So it's as simple as that!

Maybe you are looking for