Is it possible to do Automatic spooling?

Hi All,
Can i set automatic spooling for specific users? In this case users are not aware regarding to spooling.
If yes, please guide me, or is any option to track the user like which commands he has fired?
Regards
Sandeep.

YOu can have automatic spooling for sqlplus sessions. you just have to add spool command in ORACLE_HOME\admin\glogin.sql file. Whenever you will start a new session it will create a new file or append a spool file at given location.
SPOOL c:\spool.log
It will automatically create a spool file for every session .
Edited by: Gj on Jan 11, 2010 5:32 PM

Similar Messages

Is it possible to have Multiple Spool requests in one batch job overview?

Hi,
While running one of my z program in back ground, there are two spools generated (one by write statement and one by OPEN_FORM statement and both the spools are available in SP01 Transaction), but when i see the job overview in transaction SM37, I only see one spool request (that of the last spool request). Can any body in the group please tell me is it possible to see multiple spool requests in the job overview of one Abap program and if yes, how?
Thank you.
Abinash

Hi Jayanthi,
Thank you for the link. But probably that discussion was also an unsolved one.
Anyway, does any one in the group think that display of multiple spools per one step job is dependent on client / SAP Server setting? Because as evident from the chain of mails in the link provided by Jayanthi, some people say that they see multiple spool requests for one program in batch mode job overview (SM37)? If yes, can some body tell me the required configuration?

Hi! I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no. There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks

Hi!
I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no.
There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks
The url is sometingh like this (this is correctly loaded, but it could be longer)

Firefox should have problems with long GET data appended to an URL (long would be over 64k).<br />
If there are problems then it is possible that an extension is the cause of that.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Is it possible to add automatic insertions in a RH 7 template?

I'm new to RoboHelp and to HTML altogether, but learning quickly. I'm developing a help system with both General help and How to's. I was wondering if it possible to add automatic insertions in a RoboHelp HTML 7 template, as you would in a Word .dot with macros, or if I need to repeat creating tables and numbered steps all the time.
Your support is greatly appreciated.

Hi again
Okay, clearer now what you need to accomplish.
You could take a couple of approaches.
Approach one - Create a topic and define a table. Configure as you would like to see it. Then when you need it, you open the topic containing the table, copy it and paste it where you need to use it.
Approach two - Create a Table Template. Instructions for this are found on fellow Adobe Community Expert Peter Grainge's site at the link below.
Click here to visit Peter's site
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Column name of custom columns is possible of translating automatic

In SharePoint 2013 is possible of translating automatic the column name of custom columns with machine translation services or it is necessary create resource files or source site and target site?

Hi,
When you create a column, the name you enter is just a constant string. SharePoint does not do translation based on known words. Internationalization is based on resource files.
Here are the steps I would take for creating international-able columns through the browser:
Create the column with the name you want as the internal name (ie, no spaces or symbols to avoid
_x0020_ and other encoding replacements).
Edit the column by changing the column name to a resource string that you know if defined in each language you want to support.
Here are similar posts, you can use as a reference:
https://social.msdn.microsoft.com/Forums/sqlserver/pt-BR/06742b53-ccc9-4d2c-ac61-fbba37e60be1/how-to-translate-custom-column-names-in-the-target-variation-site-in-sharepoint-2013?forum=sharepointdevelopment
http://sharepoint.stackexchange.com/questions/30226/how-to-display-column-names-in-several-languages-in-sharepoint
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Any possibility of getting automatic alerts for Bdocs?

Hi all,
Any possibility of getting automatic alerts for Bdocs Instead of doing manual bdoc monitoring using SMW02/SMW01.
For example Sales order is created in CRM, transferred to R/3. bcoz of some problems order is not posted successfully in R/3 . Any possibility of getting automatic alerts for Bdocs Instead of doing manual (checking) bdoc monitoring using SMW02/SMW01.
If yes, Plz let me know how to procees automatic alerts for Bdocs .
Thanks in advance,
P.V

Hi,
This is very much possible and though a very simple transaction:
Tcode: SMW00 Error Handler
Select 'Error Action for a Specific BDoc Type'
Press Execute
Press Maintain Configuration button or press F9
In the next screen, you can specify what BDOC types you want the alert to come for, what status of BDOc should the alert come for, the error action can be set as Workflow or Mail
Select 'Mail'
Select the Typr of reciopient (e.g. B Sap User)
Enter the recipient (User name)
Check Express for an alert to popup
Cehck always Process
SAVE and Execute
These settings will help you get an email and an alert popup whenever a BDOc fails
Thsi must work for you
Kindly reward with points in case helpful
Sharif

Is it possible to check automati all bookmarks, and delete the not working bookmarks

Is it possible to check automatic all bookmarks, and delete the not working bookmarks

Try this extension:
*CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

VA05 (Or VA05N) - Is it possible to send automatically the file generated ?

Hello
when I run the VA05 (Or VA05N), the list of sales order is showed and is possible to have this list into a file.
My question is:
Is it possible make a set up to send this file automatically somewhere ? For exemple on al11, or by idoc, etc etc
Thank you for the reply
R

Hi
You can send it as a PDF from the SPOOL after a job. For instance, in tcode SBWP, and mantain distribution lists.
After, you can run VA05 and VA05N with SM36, and in Spool list recipient, in the popup dynpro in recipient, select in distribution lists and run it. Of course, you need have the SMTP in the SCOT. After, check in tcode SOSB the sending of emails.
I hope this helps you
Regards
Eduardo

ORA-12899 - is it possible to truncate automatically

I know why I am getting ORA-12899. Instead of rolling back the transaction, I am wondering if it is possible to let Oracle truncate data automatically so that update/insert succeeds. There are cases that auto-truncation is acceptable.
I am using Oracle 10 with Hibernate.
Thanks in advance.

Well,
>
ORA-12899:
value too large for column string (actual: string, maximum: string)
Cause: An attempt was made to insert or update a column with a value which is too wide for the width of the destination column. The name of the column is given, along with the actual width of the value, and the maximum allowed width of the column. Note that widths are reported in characters if character length semantics are in effect for the column, otherwise widths are reported in bytes.
Action: Examine the SQL statement for correctness. Check source and destination column data types. Either make the destination column wider, or use a subset of the source column (i.e. use substring).>
Now can you just tell what do you mean by "auto truncate" and how it does relate to this error? Also mention your db versio and o/s/.
HTH
Aman....

Is it possible to create Automatic Scheduled Agreement like Automatic PO

Could you please explain, is it possible to create an automatic schedule agreement from the PR, PIR (ie.e viz.. as Creation of Automatic Purchase Order)

Hi
Why you want to generate the Scheduling agreement automatically? What is the requirment? Volume is high?
As Sridhar mentioned you have no option in standard SAP to create automatic scheduling agreement. But you can create delivery schdule via MRP.
If you have more volume then go for developing the program with ABAP guys.
if the requirment is for Cut over only then go for LSMW or BDC options.
Hoe it helps
Karthik

Is it possible to fully automate FP RT configuration tasks?

I have been asked to develop an LV app that will let my customer automate all of the work associated with setting up a new FP-RT node.
Is it possible to programatically control Field Point Explorer from LV?
Some of the things I would like to automate are
1) Setting IP of new FP unit.
2) Upgrading firmware.
3) Configuring FP I/O.
The final "dream app" will allow my customer to hire someone off the street to plug in new FP units and then punch "GO".
If it can't be done, let me know.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Ben,
It is not currently possible to control FieldPoint Explorer from LabVIEW. As for the automation of your specific tasks with the tools that are available today;
1) No.
2) No.
3) Yes. There are Developer Exchange Postings on using DataSockets to speak to Ethernet Modules. You can use DataSockets to browse to and configure the individual channels on each module, then issue a snapshot command.
Regards,
Aaron

Creation & saving PO with Automatically spool

Dear Expert,
I wanted to generate PO out put spool upon creation & afterward saving of PO.
I have tried with all means but not succeeded. Output type ( NACE) with Dispatch time 4 instead of 3.
Kindly let me know the exact changes to be incorporated in PO output type in NACE
Rgds,
Manoj

Hi
See SAP Note 201830 - Calculation of the net price of an item. Although it's for SD, I think that it could help you to understand how to do in MM (so, change V/06 by M/06, ie: pricing condition, V/08 by M/08 ie: pricing procedure).
I hope this helps you
Regards
Eduardo

Possible to get 'Automatic' device register without NSP ?

Hi
Anybody pleade hint me config ISE1.2
I need to do separated ssid called on-board. Once non registed device comes in, ISE get sredirect to registering portal.
I can finish self fill in device register which user need to fill in his MAC manually. And I also finish dual ssid practice as dCloud ISE demo. However I need configure in between of those.
Anyone please give me configures or suggestions
Thank you
Nipat

Hello Nipat. This is not possible in version 1.2. In version 1.2 you have two options to get the device registration process:
1. DRW (Device Registration Web Auth): But this method cannot be combined with any other authentication methods
2. NSP (Native Supplicant Provisioning): You already knew about this one but it sounds like it is not an option
You can look into upgrading to 1.3 as i believe you will be able to "chain" the CWA and DRW methods with other authentication methods.
Thank you for rating helpful posts!

Is it possible to (selectively) automatically move to next patch and start?

.. so that (for example) my first three songs play one after the other then MS stops awaiting a play cmd?
I can't see this anywhere in the help but it must be a frequently used function.

I don't know a way of doing this so it automatically skips to the next patch to play after the song ends, but there are a few other ways of doing this:
1. You could combine the three tracks into one and have it play as one Playback. Insert Markers if you needed them for navigation to each of the sections/tracks.
2. You could have three different plug in's and play/mute the separate channel strips
3. There is a mixer with backing tracks template that might be useful for the type of performance/functions you need.
Try any of those, meanwhile, I'll try to think of more options.
J.

Against Reservation is it possible material transfer automatically

Hello,
My scenario is when there is a reservation against the material, in that case let's say for Ex: material is there in X plant but reservation is there against the Y plant .
In that case first we have to transfer the material from X plant to Y plant then only against the reservation we can issue the material.
At present just we are doing manual material transfer from X plant to Y plant, but it's a time consuming process, so are there any possibilities to do the material transfer automatically from X plant to Y plant, so that it will be easy to issue the material.
when there is a reservation against the material for Y plant, but that material was there in X plant in that case material transfer has to happen automatically from X plant to Y plant, so that it will be easy to issue against the reservation.
So to make it happen material transfer posting from x plant to Y plant or vise versa please explain what are the configuration settings need to be done.
Appreciate your early action on this issue
Edited by: sapmm99 on Feb 2, 2012 8:32 AM

Migration Assistant will pick up a USB drive just fine. I did pretty much exactly the same thing as you just Friday, with a USB enclosure. Select the "Volume on this Mac" option, and it will find it.

Is it possible to do Automatic spooling?

Similar Messages

Maybe you are looking for