Is it possible to do gradient-based changes between pictures in Camera RAW?
Say I have 10 pictures. The C-RAW setting for 1 and 10 are different. Is it possible to change the remaining pictures, 2-9, as a gradient between the settings of 1 and 10?
Thanks in advance
If the photos were already frames of a video then video editor can do transitions which include brightening to white but you’re talking about individual photos.
Assuming a Photoshop script (not recorded action, but a hand-coded one via the extend-a-script toolkit) can parse a number out of a particular picture’s filename, if the filenames of the photos were in an increasing order then there is probably some way to apply a numeric transformation of the filename number to a varying brightness value that is applied to a set of raws selected in Bridge, but I have never written such scripts so can’t really give any more specifics about your requested task.
I am vaguely familiar with Photoshop scripts from a long-since obsolete site hosting the ACR Calibrator script that would operate on a raw photo of the color-checker target and compute color adjustments for camera raw to optimize those colors. If you are a programmer familiar with JavaScript then this might be enough information to write your own brightening script:
http://www.fors.net/chromoholics/
Similar Messages
-
Changes I make in camera raw do not show up or update in bridge.
Greetings.
I’m working in PS CS4 in XP(government).
Changes I make in camera raw do not show up or update in bridge.
These images DO process with the changes when I run my actions.
For example: Open images in bridge. Edit. Open reaming images in camera raw. Push the images two stops in camera raw. Close camera raw. Images in bridge show no change. Run action to turn raw files into psd. Final PSD appear pushed two stops.
Purging Cache make no difference.
Thoughts?You are using Embedded thumbnails. These are small and fast, but do not show raw edits.
You need to use one of the HQ thumb options to see the edits. -
Change preview frame in camera raw?
I'm doing some VFX in After Effects using raw footage from a Blackmagic. When I open Camera raw to grade the footage a bit I can't seem to find a way to change the frame that Camera raw chooses for me to grade. Is there a way to choose say frame 10 instead of the very first frame? In my case there is a bridge obstructing my view for the first few seconds of a shot.
I guess I can guess and grade and take a look at the later half of the clip, but is there a way around this?
Thanks
NickLook at the bottom right of the Image Window
The "Y" splits the screen into before/after panes. The one next to it with the two arrows acts like the old fashioned Preview and uses the "p" keyboard shortcut.
Gene -
Why is it so difficult to convert a Raw image to a jpeg in Photoshop Elements ?! I have version 12. Once i realized to change the tick box in Camera Raw to 8 bit instead of 16 bit and Flatten image ( sometimes can flatten image if the flatten option isn't greyed out) hey presto i thought i was up and running. However after saving the photograph as a jpeg and renaming it e, after the word edit. I switched off/on my computer only for all the images i had spent time working on to have disappeared. Feeling very upset as there is no Technical Help to telephone at adobe and i don't know what to do.
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Changing brush size in camera raw?
I'm having trouble with changing brush size in the camera raw brush tools.
What I use for input is a scandinavian keyboard and I have to type in alt gr+8 and alt gr+9 instead of brackets.
This works great in Photoshop, but sadly not in Camera Raw.
Is anyone able to help me?That works well, thanks for this.
Any idea why the brush sizing feature is not similar to Lightroom where you can simply scroll vertically on the Magic Mouse?
Cheers, -
Bridge Not Showing Changes made in Camera Raw
Hi I work on an iMac (Mac OS X, version 10.4.11), and am currently trialing CS4. My problem is that I have been processing Canon Raw files in Camera Raw, but when I view the images in the preview pane of Bridge, it is not showing the changes that I have made.
This is just a sudden problem. I have been working like this for ages in CS3, and it was even working properly in this trial version of CS4, but literally all of a sudden in the middle of processing a wedding shoot it stopped showing the changes. So half the images now show the changes but the rest do not, and it no longer shows any of the changes I make in Camera Raw
Does anyone have any answers to why this suddenly changed?
Cheers Da niDaniJumbo wrote:
This is just a sudden problem.
"Sudden" is usually a sign to trash your suddenly corrupted preferences. Hold down the option key as you launch Bridge.
You may also need to Purge the Cache for each offending folder through the Tools Menu in Bridge.
Also check your thubmnail options: -
No changes appear when batch editing Camera Raw Files and saving as jpegs
When I batch edit my raw files, including saving the file as a jpeg, from bridge or photoshop the resulting file saved never includes any changes I made in the Camera Raw editor. For example if I have lightened the photo by changing the exposure in Camera Raw as a saved jpeg after batching the file is still as dark as when originally shot. Is there some little box I forgot to check or something? Thanks!
andyI've seen something like this, but have not figured out why yet. In my situation I select a group of images in Bridge and go to Tools / Photoshop / Image Processor.
There I click the "open first image to apply settings" box.
Save in Same Location
Save as JPEG, resize to fit (1200 pixels), Convert Profile to sRGB.
No Action selected
Include ICC Profile
Run it and in Camera Raw roll the saturation down to -100 (convert to b&W).
Click "Open Image"
The process runs and the first image is converted to b&w, but the others are not.
John -
Is it possible to transfer PSE11 camera raw adjustments?
I found a thread where it says it's not possible to open multiple images in PSE-11's Camera Raw. But I would like to transfer the adjustments I make for one image in camera raw to another image. Is that possible?
Thanks,
SkyzoomerR_Kelly,
May 25, 2013 12:39 AM in reply to skyzoomer
You can open multiple camera raw files into pse 11's camera raw (7.4), but i gather from your other post in the camera raw forum
your wanting to open multiple jpeg files into pse 11's camera raw.
One way i can think of offhand is to open your first jpeg, then on jpegs that follow use Previous Conversion from the flyout menu in camera raw.
Hi R_Kelly,
Very observant. Yes, I was wanting to open multiple jpeg files into PSE 11's camera raw. But I also wanted to open multiple raw files in PSE 11's camera raw and didn't know how to do that.
My problem in not knowing how to open multiple "raw" files in PSE 11's camera raw was that I only knew how to open "any" file in camera raw by opening PSE 11 and then opening the file using FILE > OPEN AS > SELECT FILE TYPE AS CAMERA RAW and then clicking on an image file (jpeg or raw).
After reading your post, I experimented and discovered that if I select multiple "raw" files in PSE 11's organizer, I can then open all of the selected "raw" files in PSE 11's camera raw by clicking "Photo Editor" in the bottom toolbar. Then I can indeed apply the same adjustments to multiple raw files at once in camera raw.
But as you pointed out, I can only open one "jpg" image at a time in camera raw but I can apply the adjustments to multiple jpg images (one at a time) by using the fly out menu's "Previous Conversion".
This answered all of my questions in applying PSE 11's camera raw adjustments to muliple images (raw and jpg).
Too bad there's no way to open multiple jpg images in PSE 11's camera raw. Out of curiosity, would you happen to know whether it's possible to open multiple jpg images in CS6's camera raw?
Thanks much for your help,
Skyzoomer -
Implement log based change data capture
Hi,
I am trying to get log based change data capture to work . My ODI version is 11.1.1.5. I guess for log based there are 2 ways:
1) use streams
2) use log miner tool
My database is Oracle 11g Express Edition. Streams i know can be possible only in enterprise edition of Oracle. So can anyone tell me how to implement log based CDC then since logminer tool is not preferred to be used in 11gHi,
Thanks for ur reply...
I received an error while creating the change table ..
ORA-29540: class oracle/CDC/PublishApi does not exist
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
Canu pls help me to fix this..
by,
Nagaa -
Possible to Route Traffic Based on AVC?
Is it possible to route traffic, based on the Application Visibility Control functions that specific Cisco routers are capable of? Here's my issue: I have two ISP's. One is at about 120% utilization. The other isn't doing anything. I can specify ip routes based on IP addresses. For instance, I can ip route 173.252.110.27 255.255.255.255 10.x.x.x to point to our ISP2 firewall, which is our non-utilized provider, for Facebook traffic. The problem is that sites like this have massive public subnets, so I won't be able to capture all of the traffic destined to Facebook. Is there a way to route traffic based on application? I know that Palo Alto firewalls have a way to do Policy Based Forwarding, based on application. I was wondering if the same was possible with AVC. Thanks for any help.
Hello.
Yes, it's possible and, actually, you have 2 ways.
1. use manual load-balanace between links.
2. use PfR to load-balance traffic automatically.
PS: you also will need NAT with route-map. -
Is it possible to make a cell change colour of a period of time with rules?
Is it possible to make a cell change colour of a period of time? for example
Date
Company
Pick Up
Destination
Total
Paid
Sat, 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
FALSE
Is it possible for B7 to change colour if 2 weeks have passed from the date in B1 and Paid is still FALSE and green if it's TRUE?
Many thanks.Hi NeoNapster,
This may be a start. Conditional Highlighting of a cell that depends upon the values in other cells can be tricky, but we can work on that.
Date
Company
Pick Up
Destination
Total
Weeks
Paid?
OK?
Sat 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
29.0
FALSE
Overdue by 29.0 weeks
Sat 4 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.0
TRUE
OK
Wed 1 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.4
FALSE
Overdue by 3.4 weeks
Wed 8 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
2.4
FALSE
Overdue by 2.4 weeks
Mon 20 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.7
FALSE
OK
Sat 25 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.0
FALSE
OK
Table with one Header Row
Formula in F2 (Weeks) and Fill Down
=DUR2WEEKS(TODAY()−A2)
That shows the Duration in weeks from the Date in column A until TODAY. You can hide this column.
Column G can contain the text TRUE or FALSE or could be checkboxes.
Formula in H2 and Fill Down
=IF(G2,"OK",IF(F2>2,"Overdue by "&F2&" weeks","OK"))
IF a cell in G is TRUE, then insert "OK". No need for any more checking.
Else IF a cell in F is greater than 2, then insert "Overdue by" and the number of weeks
Else insert "OK" (the invoice is less than 2 weeks old).
Conditional Highlighting of the Body Cells in column H. Select the cells.
Add a Rule...
text is
OK
Green Fill
Add a Rule...
text is not
OK
Red Fill.
Column H with the Conditional Highlighting rules:
OK?
Overdue by 29.0 weeks
OK
Overdue by 3.4 weeks
Overdue by 2.4 weeks
OK
OK
(And I have just discovered that colours do paste into this forum ).
Regards,
Ian. -
In BD87 T /c is it possible to control user based in Comp code...?
In BD87 T /c is it possible to control user based in Comp code...?
Thanks
MahiBD87 is a transaction to work with IDOCs.
one IDOC e.g. for vendor master can have several segments with different company codes.
But you cannot post an IDOC only partially, that is technically not possible and does not make much sense.
Further the IDOC segment in the table is just one huge field, It does not have single fields like company code.It is a generic field that can keep the segments of any IDOC.
In my opinion there is no way to control it at company code level.
In any case you posted it in the wrong forum. BD87 is not a MM transaction.
Hence, moving it to the Abap Connectivity forum -
bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?
A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
If you have any problem with the activation contact Adobe support using chat... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option. -
BRFPlus - Possible for business users to change the rules ?
Hi,
1) Is it possible for business users to change the rules in decision table, tree, formula etc?
2) If yes, what are the steps to achieve it?
Thanks.
- juliusHi Julius,
do you know the BRFplus knowledge center:
Business Rule Framework plus [original link is broken]
There is a video called Bonus Determination that shows the steps for a developer and a business user.
The developer may create the function, data objects and maybe the initial decision table. The business user then can create the lines in a decision table.
In the 701 version this should work fine. The 701 trail version is a pre-release CD which contains some bugs that should be gone in the latest SP of 701.
BR,
Carsten -
Is it possible to have location based CDR and QoE in Lync 2013
Hi,
Is it possible to have location based recording for CDR and QoE on monitoring database?Possible? Yes. But you'll want to write your own report for it as what's native likely won't help you much. Check out the user activity report, search for a user and drill into the detail on that call. That takes you to the Peer to
Peer Session Detail report for that call, if you expand Media Quality report, you can see the IPs on each end, the location as defined in Lync, the client types... You'll just need to compile it into your own report for better readability.
We do that as part of our Lync managed services offering, we have custom reports that outline call quality issues per subnet so you can see how the call quality of a particular branch or wifi VLAN compares to another.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
What's the difference between thunderbolt and mini displayport?
I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable). I was wondering what's the difference between Thunderbolt and min
-
Sso and sso2 functionlity test
Hello All, I have one issue with sso and sso2 functionlity test. How can be sure about sso and sso2 is working fine for any system. Could you provide some test to insure sso and sso2 functionlity Thanks in advance Atul jain
-
The only Apple product I use is an iPod Classic, to have the results of 20+ years of music collecting at hand. The more iTunes turns into the all-in-one media+phone center, the more annoying it gets to just use it to manage a friggin mp3 player. Scro
-
How can transfer documents created/modified in Pages and Numbers to Dropbox other than emailing them?
-
1 table of 10 million vs. 10 tables of 1 million
If you had a Parts table which had a column Part_Color. And there were 10 colors. And for every Color, there were about 1 million different records (ie. there are about 1 million different parts). Would anyone on this board consider breaking that tab