Is it possible to do manaul posting from FI if the customer blocked

Dear All,
If the customer blocked in all the sales areas, is it possible to do manual posting from FI.
Kindly clarify.
Regards,
Mullairaja

hi raja,
yes, you are right because even sales area is blocked also you can post in FI
if it is blocked with COMPANY CODE LEVEL, then its a problem
hope this clears your issue
balajia

Similar Messages

Transfer posting from material to material ( for blocked stock)

Dear All,
Whether transfer posting from material to material can be done for blocked stock also? because through 309 movement type i did not find any option, so let me know if there is any option
Regards,
Balakrishna R.V

Dear
Transfer posting of material can't be done if material is in Block Stock.
When block stock is inspected in quality test in inquality inspection stock then it goes to Unrestricted use stock.
finally Transfer posting is possible for unrestricted use stock material.

Is it possible to export a file from Organizer with the list of all the images in an album?

Is it possible to export a file from Organizer with a list of all the images in a certain album? In filling one of my albums I did not save my edited images to the same file... they are spread out a bit.... Now I want them to make a book with them (outside of Elements).

As far as I know, Elements does not have the ability to create lists.
The solution to your problem of making a book outside of Elements is to place all the desired photos in an Album and then select File->Export->As New Files which gives you the ability to make a copy of every photo in the album in a new folder, from which you would create your photobook.

Transfer Posting from Vendor Ledger to Customer Ledger

Dear Experts,
We are in to service industry, most of our customers are also having vendor codes, we used to give some commission to them the is posted to vendor codes due to TDS posting, on periodical basis, the same needs to adjust with outstanding in customer accounts.
For this our users are processing through individual posting for each customer through F-04, as volume is very high and it is consuming lot of time to complete this activity. Is there any standard process available in SAP, so that we can process all the transfer postings from vendor ledgers to customer ledger in a single process on periodical basis.
Thanks & Regards
Madhava Raj

Hello Raj,
You can use BDC as stated by Mani.
BDC - POSTING_INTERFACE_CLEARING
Please check this link for more information related to this BDC.
http://scn.sap.com/message/3770202\
I hope it helps else revert us for any issues.
Thanks & Regards,
Lakshmi S

Is it possible to get a Virus from an over-the-air distributed app?

I've been invited to participate of a beta and have seen 2 apps that can be downloaded directly from safari over-the-air. There's any risk they can harm my device in any way? And no, my iphone is not jailbroken

Thank you for the help. The developer did say they're not colllecting the UDID's or the data on the phones, but I'm not trusting my iphone and my account's safety in his words only. He did also mention that the date had to be changed in order to download it, maybe because Apple doesn't allow it to be distributed that way anymore, anyways I'll just stick with the apps I get from the Store.
Best Regards.

Transfer Posting from Own stock to customer stock

Hi ,
I have two storage location. Now i wanted to transfer stock from one storage location to other , but while transferring the stock should be received against a sales order in the receiving storage location.
For e.g.. i have a storage location in the plant and another one in port. I want to transfer stock from the plant one to the port one.So when the goods are received in Port storage location it is received against a sales order that is booked against a sales order. can this be done?
how to do this?
ram.

try it with movement type 412, I can enter a receiving storage location different from the issueing storage location while doing the transfer posting own to customer stock

Is it possible to get LS name from SLD when the scenario is executed

can I create a scenario that gets the Technical system details of the Business system from SLD?
Can I have a Soap - File scenario, in which case, once the request comes from Soap, corresponding Business system's Technical system details ( like LS name and client no ) should be taken from SLD and send as a file.
Is this possible ??
if yes, how?
Regards,
Venkat.

Hi
Technical system details - Not sure if that is directly possible..
but an option would be to use a FixValue/ Valuemap function provide a Key & get the value
to generate the Key, use a UDF, get RUNTIME constants to make a key
check this link for constants http://help.sap.com/erp2005_ehp_04/helpdata/EN/b3/9a2aeb24dc4ab6b1855c99157529e4/frameset.htm
e.g
java.util.Map map;
map = container.getTransformationParameters( );
String const;
Const = (String) map.get(StreamTransformationConstants.CONSTANT_NAMEfromlink);
return const;
if you want XI's information, then you can try this
String sysSID = (String)System.getProperty("SAPSYSTEMNAME");
OR
String sysSID = (String)System.getProperty("user.name");
Regards
Vishnu

Overtime posted from HR for the period

Hi
I have created on report from HR ovetime posting for the period.
SELECT ppdhd~docnum "Document number
          ppdhd~doctyp "Document type
          ppdhd~bldat "Document date in document
          ppdhd~budat "Posting date in the document
          ppdhd~runid "Number of Posting Run
          ppdhd~evtyp "Run type
          ppdhd~blart "Ref Document type
          ppdit~hkont "Gl Account Number
          ppoix~pernr "Personal Number
          ppdit~kostl "Cost Center
          ppdit~kstrg "Cost Object
          ppoix~waers "Currency
          ppoix~betrg "HR Payroll Amount
          ppoix~lgart "Wage Type
INTO CORRESPONDING FIELDS OF TABLE i_output
FROM    ppdhd
INNER JOIN ppdit ON
          ppditdocnum EQ ppdhddocnum
INNER JOIN ppdix ON
          ppdixdocnum EQ ppditdocnum AND
          ppdixdoclin EQ ppditdoclin
INNER JOIN ppoix ON
          ppoixrunid EQ ppdixrunid AND
          ppoixtslin EQ ppdixlinum
WHERE   ppdhd~bldat IN s_bldat AND
          ppdhd~budat IN s_budat AND
          ppdit~kostl IN s_kostl AND
          ppdhd~bukrs EQ p_burks AND
          ppdit~hkont IN s_hkont AND
          ppdit~prctr IN s_prctr.
from the above query I am getting the result in duplicate data with different runid.
Please let me know that I have to do some other fillteration for this one.
Regards
Sebastian John

Thanks,
from some other table also I needed to take or not?
Regards
Sebastian John
Edited by: Sebastian John on Dec 8, 2009 12:31 PM

USPS service instead of Canada Post from Canada to the US

I am happy to report that I will abandon Canada Post for most of my delivery starting in a few days. After searching for more than 1 year a way to get US packages cheaper and with tracking (It cost me about 17$ to get tracking on a 400 gram shirt) I have found a service provider, 5 minutes driving distance from my house on top of that, who will be offering USPS delivery service. He will have a truck that will go to the US once per day. Cost of that same shirt, with tracking, 7$. I spend about 800$ per months in delivery fees and Canada Post will loose that. I am sure they don't care but I will care to save more than 70% on each delivery! I will keep using Canada Post for their expedited delivery service in Canada but that only counts for about 10% of my business!
Good times ahead!

kaymar_88 wrote:
I am happy to report that I will abandon Canada Post for most of my delivery starting in a few days. After searching for more than 1 year a way to get US packages cheaper and with tracking (It cost me about 17$ to get tracking on a 400 gram shirt) I have found a service provider, 5 minutes driving distance from my house on top of that, who will be offering USPS delivery service. He will have a truck that will go to the US once per day. Cost of that same shirt, with tracking, 7$. I spend about 800$ per months in delivery fees and Canada Post will loose that. I am sure they don't care but I will care to save more than 70% on each delivery! I will keep using Canada Post for their expedited delivery service in Canada but that only counts for about 10% of my business!
Good times ahead!Great to hear, good for you and I am 100% sincere in that. I dream of getting out from under the oppresive bully monopoly known as Canada Post. I hoped, after reading your post, that you might be somewhere close to me but alas you are in Quebec. In Toronto here it appears that we only have Chit Chats Express to deal with and my own experience with them has been very much less than favorable. Anyway, best of luck mate Cheers, thD

Is it possible to simulate a table for reference in the "Custom Calculation Script" in Acrobat?

I am attempting to simulate a table in a Acrobat form where the formula looks at the number or name from another field and looks through the code for the name or number reference and returns the value associated with the number or name. Is this possible in Acrobat forms?
Bruce

Yes, it's possible. You can get the name of the field that is being calculated using event.target.name, and then you can manipulate that name to get a row number (for example) and access other fields in that row.

Returm Delivery Possible Despite ECC Invoice Posted

Hi forum gurus,
We are implementing SRM 5.0 (SRM SERVER 5.5 and are on SP 12) in the extended classic scenario.
We have a test issue where we created a PO for 10 items, fully GRN'd the PO and then posted an invoice against the PO in ECC (no blocks on th invoice).
We can then see the 'Return Delivery' button is active and the return delivery can be posted from SRM despite the invoice having been paid.
Having tested ECC this also seems to be the case if we were to create the PO, GRN and invoice all within MM.
Can you tell me?:
1. Is this correct logic?
2. Can we change ECC finance or MM config to stop this (I know there is config to stop this being possible for GR-Based IV PO items, but what about normal items)
3. Does anyone have any suggestions as to what is best practise in this case and why?
Thanks a lot,
Best regards,
Nick

Hi. In SRM you can easily use the BBP_DOC_CHECK_BADI to prevent this by issuing an error.
In ECC you can use MB_MIGO_BADI method CHECK_ITEM to issue an error.
Regards,
Dave.

Is it possible to launch a form from an OAF page using OAF Personalization

In R11, the Customer Standard form ARXCUDCI was customized to call a custom block from the Address screen. In R12 the customer standard form has become an OAF page. We have decided to create a custom form for the custom block using Oracle Developer. However we need a mechanism to call this custom form from the Customer Standard OAF page.
My query is if it is possible to call a custom form from an OAF page using OAF personalization only (i.e. without directly customizing the code of the OAF page)
Thanks
Sanjay

Dear Apurba,
I have made some progress.
I have open the Customers OAF Page, queried a customer, selected a site and opened it.
Then chose Personalize "Account Site Address"
There I added a Button on the Header Address level
ID=XXTVL_LASSY_BUTTON
Populated the Additional Text and Prompt properties.
Also set Destination URI=form:SYSADMIN:SYSTEM_ADMINISTRATOR:STANDARD:FND_FNDMNMNU.
The button is now showing in the address page, and when I click on it it opens the seeded Menu form.
I now have to create the custom form and set Destination URI to the Custom Form.
I am also aware how to add parameters to Destination URI.
But could you let me know how to read the value from a OAF page form field and reference it in Destination URI.
I need the value of PARTY_SITE_ID of the Address OAF page.
Alternatively, the Site Number is displayed on the OAF page. If I can read it that will also do. I can use the Site Number in the custom form rather than PARTY_SITE_ID
Thanks
Sanjay

Is it possible to export a Book from Aperture 3 to iPhoto?

I shot a wedding for a friend and made a layout of a book on Aperture 3.
Printed a few books which I thought were beautiful.
I was wondering if it would be possible to export this book from Aperture (with the layout and photos intact) as a file (editable or read-only), so my friend can import and open it using iPhoto and order more copies of the book through Apple when she pleases.
Tried Google and couldn't find an answer. Thank you for taking the time.

How about importing from iPhoto into Aperture 3?
I have made a photobook in iPhoto and then bought Aperture 3, but I can't find it possible to export the book in a format that I can open in Aperture. Also, when I export the book in size Large or above, iPhoto crashes.

Stop IM posting from interim storage bin

Hi,
We have a WM activated where the Transfer order is created and posted automatically when any material movement is posted.
Now when the stock in WM is already allocated to delivery still its possible to post the IM.
For e.g.
1 peice of material 'ABC' is available in IM and also in warehouse. A outbound delivery is created which has trigered a transfer order. Now the stock is lying in 916 interim storage type.
other user does a transfer posting movement (311 movement) of same material. Since the material is not available in the normal storage type, the transfer order is not created automatically.
Now the stock lies in 921 interim storage type.
I want to avoid such scenario. Is it possible to stop any posting in IM if the stock is not available in the normal storage type?
Regards

Hi Frenchy,
Thanks for your valuable input. This was something new for me.
I checked the settings in OMM8, the 'No stringent FIFO setting' is there for all the Interim storage type.
I think this will not help because when the IM posting is done, since there is no stock in normal storage type, system is not creating a transfer order (as per customization which is to created TO automatically). It only creates a open transfer requirement without finding a source storage bin.
However we have found another way to stop the posting. we have set a availability check rule to the transaction and movement type in IM which check the available stock during the posting and sets a waring/error message.
However this is at IM level.
Is it possible to stop the posting at IM via some setting in WM?
Regards

Post-query trigger order for data blocks in master detail relationship

Using Forms [32 Bit] Version 10.1.2.2.0 (Production) Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production.
I have the following problem with a form I am working on. It has a master data block with multiple detail data blocks. I am trying to create a post-query trigger on one of these detail blocks that will do a select using the value of a field from another of the detail blocks.
The problem is that the post-query trigger of the data block I am trying to do the select with is firing before the post-query trigger of the block I need the value from is firing. I tested by just putting in a display message and having it return the value of the id I am tryign to use. Right after I do a query on the form, I get the messages saying:
"Error: cannot find price for id:" and there is no id, and then the message from the other datablocks post-query saying, "id is: 123"
Is there a way to change the order that the datablocks are queried? Or should I be using a different trigger to do this?

Do you mean as it is displayed in the object navigator? It's not the first block under the data block section, but it is above the other block that is exceuting before it, so I assumed the order in that did not matter.
EDIT: Thanks Magoo! That solved the issue.
Edited by: a small rabbit on Sep 4, 2009 11:28 AM

Is it possible to do manaul posting from FI if the customer blocked

Similar Messages

Maybe you are looking for