Is it possible to do multiple ssids and encryptions on an autonomous AP without vlans?

I got a customer who just has autonomous APs. They are upgrading from 1210s to 1262s. They are currently running a config that is wide open with no authentication or encryption and using a VPN tunnel on the wireless clients for security. They want to switch to using WPA2/PSK with the new APs. They have existing clients that have to continue to work during the upgrade to the new APs. They run 3 shifts so it is a 24 hr operation with no downtime. What I was thinking would be to configure the 1262 with multiple SSIDs, one with their existing settings and one with the new. Then I could swap the APs one at a time and it would only impact service for a short period of time while I was mounting the new AP. Then once all the new APs are installed I could transition the clients over to the new SSID and encryption then disable the old SSID once all the clients are switched over. I've done this before with a WLC but not with an autonomous APs. The only config examples I can find uses VLANs. This customer is not using VLANs. Is there anyway to use multiple SSIDs with different encryption on a single radio on an autonomous 1262 without VLANs?
The site has about 30 APs and 100 clients. Yes I know a controller would be preferred for a site of this size but that is a question for sales and why they didn't see them a controller. I just get stuck with what they sell them.
thanks

Hi Don,
Im afraid on the autonmous platform you can not map multiple WLANS to a single vlan.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Similar Messages

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

Multiple SSIDS and disappearing

We have Cisco 3602i access points for the most part, all of which advertise multiple SSIDs.
Very occasionally we see an SSID completely disappear from view, even though others remain solid (I can't say it's all devices as the majority of people who raise the issue have apple devices, but there are the odd one or two who use Windows laptops).
Also, the RSSI seems to fluctuate wildly.
I should add that we have disabled up to 11mbps data rates on the controller and we're running 7.6.100.0 currently, but plan to upgrade to 7.6.110.0 tonight.
I guess my question is how can an SSID just drop off the client view if others on the same AP are fine?
How does the AP deal with multiple SSIDs and does it prioritise?
I have to add that I've never had this issue and I'm just using a company standard HP laptop with an Intel chipset.

Hello,
See my comments:
Also, the RSSI seems to fluctuate wildly.
A: This is often how a device hears the frames. Sometimes in high interference you can epxect this to jump around. I normally like to see if all the devices are doing this or just a select few. Sometimes poor clients jump around more than others.
I should add that we have disabled up to 11mbps data rates on the controller and we're running 7.6.100.0 currently, but plan to upgrade to 7.6.110.0 tonight.
A: I dont think turning off lower rates are bad unless your WiFi cant support the design. Good call get on the latest.
I guess my question is how can an SSID just drop off the client view if others on the same AP are fine?
A: Again, its a client missing frames like beacons.
How does the AP deal with multiple SSIDs and does it prioritise?
A: This SSIDs are virtualized. I blogged how this is done:
http://www.my80211.com/home/2011/5/2/wlc-how-cisco-virtualizes-the-base-radio-mac-address-on-the.html
I have to add that I've never had this issue and I'm just using a company standard HP laptop with an Intel chipset.
A: Again I think if you search you might see this is more around specific devices. I would do a packet capture and see what is going on. Recently had to troubleshoot an Android only to find out it was just bad wifi client. Always sending NULL frames and scanning and not passing traffic

How do i manage multiple users and devices with one apple id without everything showing up on every device?

how do i manage multiple users and devices with one apple id without everything showing up on every device?

How to use multiple iPhone, iPad, or iPod devices with one computer

Single access point with multiple ssids and single channel possible?

Hi everybody.
I have this silly question.
Let say we have three vlans, vlan1,2,3 and they are mapped to wlans as follows:
Vlan 1 ssid1
Vlan 2 ssid2
Vlan3 ssid 3
AP --------trunk------Switchted network.
Our Ap has mobile devices in three wlans, i.e ssid1ssid2 and ssid3
Since AP uses half duplex mode, mobile devices need positive ack from ap before they can send data, therefore once channel let say channel 3( assuming 802.11b is used) can be shared by all mobile devices in three wlans.
Is my understanding correct?
Thanks and have a great weekend.

Hii ,
Yes ,that is pretty much possible as suggested by other experts on board. Depending on your access point you will have 1 (2.4 GHz) or both 2.4 & 5GHz radios.
You can configure multiple SSIDs (up to 16 ) known as MBSSID mode in autonomous environment. In Controller based architecture you can configure up to 512 WLAN (SSID) and transmit any 16 of them per AP (using AP group feature). However , it is recommended to keep multiple SSID count below 8 as for each SSID separate beacon will be sent on air which consumes more air time.
Hope this helps
Thanks
Vinay

Multiple SSIDs and renaming a SSID

Can there be multiple SSIDs pointing to the same vlan/mob grp?
Also can one 'rename' a SSID that is already created or should it be wiped out and a new one recreated?
I assume each SSID needs to be tied to a VLAN unless one is a guest SSID. Can one have 2 guest SSIDs, in other words no security, but different SSID names?

You must include at least two profiles in the Auto Selected Profiles Box. The profiles must specify an SSID; otherwise, they cannot be selected in the Available Profiles box. Profiles cannot specify multiple SSIDs; otherwise, they cannot be selected in the Available Profiles box. Each profile that is included in auto profile selection must have a unique SSID. For example,
if Profile A and Profile B both have "ABCD" as their SSID, only Profile A or Profile B can be included in auto profile selection.

Multiple SSIDs and NPS

I have a WLC setup with one ssid (ssid A) using Web auth tied back to NPS with the requirement be that you have to be in the domain users group to authenticate. It works fine. I have SSID B setup using eap-tls with the requirement of the pc having to be in the domain computers group. This work as a new user can login to the pc without having ever logging into it before. When I try and take my person pc and join ssid b it get an error as expected. But if I take my android phone and tell it to accept any certificate unspecified it will be allowed to join and i think its because it may be failing against the first match which may be the domain users requirement but matching on the domain users group requirement. It seems that the fail through is the issue.

You need to see how devices are passing via NPS. With webauth, it should only allow username and password and EAP-TLS should only allow machine. So when you create your NPS policy, webauth should point to only the OU and EAP-TLS should point to your domain computer OU.
Move SSID B before the SSID A policy. You can also add a called station id for the EAP-TLS SSID using something like:
..-..-..-..-.-..:SSIDB
The dot is a wildcard for the Mac address.
Sent from Cisco Technical Support iPhone App

Is it possible to make multiple playlists and set itunes so that it will not let you add a song to more than one playlist?

I have a veryl large Itune library and want to make multiple playlists so that for example when driving long hours in the car I can change to another playlist and not have songs repeated. I do realize if I noted down every song that was put in a playlist I would be able to accomplish this but it would be nice if there was some setting that I am unaware of that would keep track of this for me. Any suggestions?

To Clearify for example I am wondering if their is a setting so that Itunes won't let me add a song to playlist A if it is alread on playlist B. Any Suggestions?

Possible to sync multiple files and output the merged clips?

I'm working on a documentary project and have hundreds of individual clips from multiple Canon C-300 cameras and a multi-track master audio recording from a SoundDevices 744. Since this is a documentary the cameras aren't slating every take, instead they all have Lockit boxes generating timecode that is slaved to the master clock on the 744.
What I need to do it sync the pictures and the sound and output the sync'd files for screening and editorial. ScratchLab is not sync'ing the material properly but bringing a clip into Premiere is locked up without a problem.
Is there a way to sync the audio/video and output individual sync'd files using the tools in the CS6 suite? Please keep in mind that there are hundreds of individual clips so the process would have to be automated.
Cheers!

That is so incredible !!!!
I also have hundred of start/stop clips with TC and audio start/stop with TC too, and I don't find a way to place the clips on the timeline at the right place of the TC.... The clips are R3D and the sound comes from a 788T. Nothing special. I work a lot with Premiere and Red and I LOVE IT.
What ? I should record audio on the Red just to permit PluralEyes to do thesync from audio ??
Please Adobe team, tell me I am sleeping and when i wake up there will be a soluce !

Trying to setup 1131 in autonomous mode with multiple ssids and vlans

hi there,
I'm trying to setup an aironet 1131 in autonomous mode with a WLAN for each VLAN.
I can connect to the SSID "BLUGstaff" but I don't pick up a DHCP address and when I set a static IP I can't anything on the vlan so I can only assume I have made an error.
I have attached the config for the access point.
The switch port the access point connects to has the following config...
interface FastEthernet1/0/3
description ## Access Point ##
switchport trunk encapsulation dot1q
switchport trunk native vlan 121
switchport trunk allowed vlan 1,121-124
switchport mode trunk
spanning-tree portfast
end
Can anyone explain what I've done wrong? Thanks in advance for any help,
Huw

Hello Huw,
as i see in your confirguartion.
native VLAN is 121. so you have to correct following in your AP configuration
1) interface Dot11Radio0.121
encapsulation dot1Q 121 native
bridge-group 121 ->>>>>>>>>>>>>>>> change this to brige-group 1 , native always tied to bridge group 1
2)
interface FastEthernet0.121
encapsulation dot1Q 121
add also under this sub interface
bridge-group 1
please let me know how it goes.
Kind regards
Talal
==========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily

HT1657 is it possible to rent a movie and play it on a TV without Apple TV?

wanted to rent a movie and watch in a big screen, but don't have apple tv. i do have the HDMI adapter for the miniport. it is possible to use?

You can possibly get away with it... depends on if your TV/cables support HDCP, etc.

Multiple approvers and one approver execute the workitem without complete

Hi all,
In case of multiple approvers, if approver-A executed the workitem but cancel it without complete. The workitem will stay only in approver-A SAP inbox and disappear from other approvers' inboxes. Is this a standard way?
For whatever reason, if approver-A cannot execute the workitem. What can be done by workflow administrator to make the workitem appear again in other approver's inboxes?
Thanks and Regards,
Donald

Hi Donald,
Yes this is the standard behavior of workflow.
If you send the work item's to the multiple approver's and one approver open the work item it will disappear from all other's inbox.
if the approver A open's the work item, then it will disappear from other's inbox. You can use the fm SAP_WAPI_FORWARD_WORKITEM to forward the work item's to the other user.
Thanks,
Viji.

Multiple SSID with different Login Web authority pages

Our current setup is one Anchor control and then several WLC’s, I want to know if I can have multiple SSID and use different Web Auth pages form them, so I can have a SSID that requires a password to Authentication access and another SSID that requires pass through Authentication but they would have different web authentication pages and go to different pages once Authenticated.
Is this possible to ?

Hi,
If you are running WLC software 4.2 and above then u can do this on per WLAN basis.. here is the link which tells on how to do it..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml#A1
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Broadcasting multiple ssids

Hello,
I want to know if it is possible to broadcast multiple ssids in the beacon packet so that the client can choose one of them depending on his role.
We have a customer that wants to assign different ip ranges to users but without having to configure anything in the clients. I know it is possible to map vlans to ssids, but it is necessary to manually configure the ssid in the profile.
I know that with this requirement we can't use ssids and neither 802.1x to dynamically assign vlans to users, but does anybody know any way to accomplish this?
Many thanks and best regards,
Ruben

Currently I guess this option of Broadcasting multiple SSIDs is not supported.

How to change multiple artboardsizes AND objects in it?

Hi everyone
I want to know if there's a possible to change multiple artboards AND the objects that you make in it, scale proportionally?
I'm able to change my artboards independent but not al the artboards on the same time. Is there an option for that you can change multiple art boards on the same time?
Then I have an other question.
Is there a possibility that you can scale you objects (or things that you made in that artboards) proportionally when you want to change your artboards?
Or do you have to remake al de artboards on the size that you want and scale the objects that you make manualy?
Thank you in advance

astriva wrote:
Or do you have to remake al de artboards on the size that you want and scale the objects that you make manualy?
SHort answer: yes.
Long answer: first create rectangles the size of your artboards. Then delete the artboards.
Scale everything as desired. Convert rectangles to artboards via the command in Object > Artboards.

Is it possible to do multiple ssids and encryptions on an autonomous AP without vlans?

Similar Messages

Maybe you are looking for