Is it possible to do slides in portrait format and fill full page?

Are you talking about projecting onto a screen or printing out?
If you're talking about projection, first, you can't display slides in portrait format, as all slides in a presentation are landscape by default. I believe most all presentation projectors are also landscape only (you'd have to turn it sideways in order to project portrait.
Second, you can put a portrait picture in the middle of the landscape formatted slide, but there will be a lot of background showing. You could stretch the image to fill the screen, but that would distort it badly or cut off huge parts of it.
Because of these limitations, you can't have a portrait image fill a landscape slide and fill the full slide.

Similar Messages

How do i make a presentation in portrait format?

Im trying to create a flyer and cant figure out how to make a slide in portrait format.

Welcome to the forums!
Is there a reason you are making a flyer in Keynote rather than Pages? Pages is much better suited for that kind of task.
That said, if you want to change the orientation of a presentation, in the Document Inspector change the Slide Size to whatever custom size you want.

I have a Word file in square format. Converting it to PDF wipes the format and produces a document in portrait format.

I have a Word file in square format. Converting it to PDF wipes the format and produces a document in portrait format.

Create a Custom Page Size with the same dimensions as your document within a new Joboptions file and then use that new Joboptions file when you convert your square document to PDF.

Is it possible to import slides from one Keynote presentation into another. If so how do I do it on iPad 2?

Is it possible to import slides from one Keynote presentation into another. If so how do I do it on iPad 2?

You do it sort of like the way you arrange your apps on the iPad and how you drag apps into groups. You do the same technic with your Keynote slides.
Look here......http://support.apple.com/kb/PH1360

A single report can't combine portrait and landscape oriented pages

Post Author: joelo2
CA Forum: Crystal Reports
Hi,
Can a single report in Crystal report XI (version 11.5.8.826) combine portriat and landscape oriented pages like Crystal report 2008? For example, I have one main report with several subreports in the main report. I want one subreport be in portrait page orientation and the other subreports in landscape. Can I do something like that in Crystal report XI version? I even tried writing a small .net program to do this, but it doesn't seem to allow me to do that programmatically either. Please help

Post Author: ngra
CA Forum: Crystal Reports
I'd like to elevate this issue with Crystal Reports XI. There is a critical application which we developed in-house which needs both portrait and landscape orientation in each of the 30,000 plus documents we are sending out every month.If developers in Business Objects are picking this thread up - we need a patch for this limitation - quick. Right now, we are toying with the possibility of exporting the documents into a text format with markers indicating if a page is portrait or landscape. This is to be loaded into a Xerox machine (which costs hundreds of thousands of dollars), where it is mapped automatically to portrait or landscape. Note to Business Objects: This will provide us and countless others with much value. Think 80/20 rule - most bang for your development bucks and value for your customers!

Can I mimic a 'slide show' of stills and videos with this technique

I want to be able to mimic an old fashioned slide show on a Blu-ray disk, except that each 'slide' – I'll call them items – could be a true still, or a still with pan/zoom, or even a short video. Whatever a particular item is, I want to click a button and the show advances to the next item. If the next item is a video, the video pauses on the last frame when it is finished.
Just like the old magazine full of slides, imagine a folder full of items – some may be stills, some videos. After importing into Encore, setting up the navigation and menus, and then burning to Blu-ray, I want to be able to play them in sequence at the press of the Enter button.
I'm pretty much a novice with Encore, and to save spending more time reading the manual, I thought I'd ask if I can mimic a slide show in Encore with the technique described below. I got the idea from page 152 of the PDF manual:
The buttons on a menu are the primary navigation tool for the viewer. They control how the viewer steps through the project. Each button in a menu must lead to another menu, a timeline, a chapter, a playlist, a chapter playlist, or a slide show.
My limited experience with Encore is to set up a series of videos on a single timeline, and generate one menu with a "Start" button on it. When the Blu-ray starts up, the Start screen appears and stays there until I press Enter. Works well.
A slide show of stills using buttons only
So I thought: to generate my old-fashioned slide show (ignore videos for the moment), I would use the buttons themselves as the stills, taking my queue from the quote above: "Each button in a menu must lead to another menu…". My slide show would consist of jumping from one menu to the next. This leads to my first question:
Q1: Is it possible for a menu to have a full-screen button, call it the Image Button, that is actually the still image that is desired to be shown? So the viewer sees the Image Button, thinks it's the image (which it is), but it is actually a button. When the viewer presses Enter, the button activates and goes to the next menu which also happens to be the next full-screen image. The viewer is jumping from Image Button to Image Button, with the buttons filling the screen and being the actual images.
A slide show including videos
To include a video in the slide show, the destination when Enter is pressed would be a timeline with the appropriate video. At the end of this video, the navigation would lead to a menu which has an Image Button of the last frame of the video. The effect is that the video is paused on the last frame, waiting for the user to hit Enter to advance to the next item (still or video).
If there is an easier way to mimic a slide show of stills and videos, please let me know.

Stan – I posted 3 years ago in the Keynote Forums (I'm on Mac) about this sort of thing, knowing that eventually I would want to do it. The answer came back then that Keynote might have problems. So I've recently posted again about Keynote, but no responses as yet.
I expected problems with Encore and welcome some of them. Overcoming problems is the best way to become intimately involved with software.
I'm glad you asked why I don't just use Powerpoint (or Keynote in my case). Now's my chance to clarify my thoughts:
Macs do not upscale very well. Sometimes I may want to show part of a DVD. I've tested playing a DVD on my iMac versus on a Oppo BDP93, fed to a BenQ W7000 projector throwing a 3 metre image. There is an obvious difference in image quality because the Oppo, being hardware based, can interpolate in real time as it scales from 576p (PAL) to 1080P. DVD Player on my iMac simply magnifies the image, resulting in obvious pixellation.
Dissolves and complex effects in Premier challenge any software based h.264 player. I don't like to see decoding artifacts, for example, during a dissolve while a part of the image is also reducing in size, spinning, and disappearing into the distance. An extreme example, but an effect I used once. From my reading of blu-ray player reviews – and from my limited testing – all blu-ray players can easily handle the highest bit rates from a blu-ray disk.
I don't have a laptop so I'd have to buy one. I'd rather spend the money on a dedicated player if that route turns out to be suitable.
I don't trust computers for a presentation. Too unreliable. When I was showing multiscreen audio visuals in the 1980s (4-6 projectors), I always had a backup Tascam 4-track with me, back up soundtrack on tape, back up amp, and a backup slide projector. Even had a backup amp in the car. Speakers, well, if one failed I had two there anyway. With digital, to feel comfortable, I'd have to buy a second laptop. A good quality, backup Blu-ray player can be had for $100. And yes, I do have a backup W7000. I don't trust digital projectors either.
Running a presentation from a laptop always looks amateurish to me. Someone hunched over a tiny screen, fooling around with Windows or OSX. And usually it's all mirrored on the big screen for everyone to see. I'm never impressed. I want to replicate a cinema experience as closely as possible. Darkness, the audience hushed, and up comes the first image.
Any suggestions about automatically linking a whole heap of menus?

Is it possible to export a slideshow in 1080p format and then show it on a projection TV in 1080? if so, how - what conversions are necessaryw on a projection TV, if so how

is it possible to export a slideshow in 1080p format and then show it on a projection TV in 1080? if so, how - what conversions are necessary

Getting it out of Aperture is not a problem. When you export the slide show select 1080p as the export format.
What happens then gets tricky. To create a true high def 1080p DVD requires Blu-Ray. So you will need an external Blu-Ray recoreder and software to create the DVD.
If you're hooking your computer up to the TV then you'll have better luck.

Imported slide show into PE11 and some pics rotated unexpectedly, How can get back to horizontal?

Imported slide show into PE11 and some pics rotated unexpectedly, How can get back to horizontal?

winkhi
Just what are the pixel dimensions of these photos that are automatically rotating on you in Premiere Elements 11 workspace after being transferred there from the Elements Organizer Slideshow Editor? Do I have that correct? If so, how are you making the transfer....Edit with Premiere Elements Editor, Burn to Disc, or other as Elements Organizer 11 Slideshow Editor output?
What is the scenario...from the camera to the computer hard drive, landscape; from the computer hard drive to the Elements Organizer 11 Slideshow Editor, landscape; from the Elements Organizer 11 Slideshow Editor to Premiere Elements 11 Project Assets/Timeline, rotated to Portrait?
Do you find that the frequency of the problem is related to pixel dimensions, number of photos used? What is the format of these photos, jpg or other?
Are you using the Rotation option in the Applied Effects Tab/Applied Effects Palette/Motion Panel expanded to correct the photo rotation?
Just some thoughts for now.
ATR
ATR

Is it possible to create full page banner or slideshow?

I wonder is it possible to create effect like Enfold Theme Demo | Home v7: One Page Portfolio ?
Specifically the responsive slider or image box which fills all first browser screen (minus header maybe) but moves up on scrolling?
Thanks.

And similar question: in this case is it possible on the first screen to have horizontal menu pinned to bottom border of browser window and later on scrolling moved up till top its border?

TS3274 I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position. How can we make it work in both positions?

I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position. How can we make it work in both positions?

Just in case you are not running iOS 7 and don't have the control center feature.....
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it and you are running iOS 5 or 6, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If you are running iOS 7, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

The best Slide Show with CS2 and...

SOS can anyone help. I have PS CS/2 running on PC with XP and want to produce slide shows with music and possibly narrative that can be viewed and heard via CD/DVD Web etc. What is the best solution - do I need Elements, what do people suggest.

ProShow Producer

HT201412 ipad screen will not slide. Tried resetting and a factory reset but still will not work.

ipad screen will not slide. Tried resetting and a factory reset but still will not work.

I have the same issue on my Ipad Air. Screen will not rotate, I have reset the settings, still only displays in the portrait mode. A couple of interesting things though. a couple of days before it completely locked up into portrait I would have to turn the ipad off and hold it in the orientation I wanted because it would not change orientation after I was in an app.
Also, I just played a Netflix video and it was in landscape mode.
Any ideas?
Thanks,

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

Is that possible to display the user selection data in the printable page?

Hi All,
I'm going to add a printablepage button on my page.
Here comes a questions.
Is that possible to display the user selection data in the printable page?
For example,
I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
Please help.

Hi Yannick,
Thanks a lot for the information. It worked.
The portlet data can be accessible using bindings, but parameter name can be different.
Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
Is this possible? If yes can you please let me know the steps?
Thanks in advance!
Somnath
Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

Is it possible to embed an editable PDF form into an html page?

I have PDF form (editable) that I want users to be able to login and fill out. Once filled out they would click a "submit" button and the PDF would be stored on the database. Is this possible to use a PDF - without creating a custom form from within Bc? Thanks!

It's not possible, you *may* be able to get the PDF embedded via an iframe but you certainly wouldn't be able to save the information, at least on the server.

Is it possible to do slides in portrait format and fill full page?

Similar Messages

Maybe you are looking for