Is it possible to download files individually ,instead of all together, while selecting multiple files to download.

i want to download multiple files , but some of the files are very large and i don't want to sit at my computer all day waiting to unpause or pause downloads so that the files will download faster . i was wondering if there was a option to download files individually instead of all together. when they download together it can sometimes cause problems because my internet will restart and go to a slower data speed at different times of day. this causes files to be incomplete sometimes and sometimes have to be started over completely. so is it possible to have a downloading list that manages itself and puts downloads on hold until a previous file downloads?

You are probably limited by the speed of your download line. Consider possibly doing this overnight. The speed may be faster off peak and you will be able to leave the computer unattended.
Any possibility of getting compressed versions of the files to download ? Alternatively consider looking for specialised download management software. You could even probably use your Operating System and schedule the tasks with that.

Similar Messages

  • Issues with Receive Adapter receiving a file that has not completed uploading while send multiple files on the Send Adapter

    Hello,
    I am only a few weeks old into BizTalk so I am new to this application. 
    The pieces I have for my development environment consists of the following:
    FTP Server ---[SFTP Adapter]---> BizTalk 2013 ---[FILE Adapter]---> Internal Network Share Drive
    I currently configured a simple PassThru, One way Receive/Send in BizTalk where the Receive Port receives a file via SFTP 
    Adapter from our FTP server and the Send Port sends the file via the FILE Adapter to our Internal Network share drive. 
    The setup works great with small files.  However, when I receive a large file on the FTP server, the Send Port sends multiple instances of the file on the FTP server because the Receive Adapter sees that the file is there, but not yet
    fully uploaded.
    Can someone please guide me as to how I can determine when a file is fully uploaded to the FTP server before the Receive Adapter fires?
    Thanks,
    Mitch

    Yap BizTalk does not have control over locking the file during read/write Operation and its the third party which need to take care of this (by rename the file after upload ) .
    If the file size is too large I would suggest to bypass the message box as it has performance bottleneck during peak hours 
    Apart from being repetitive, this is not good advice.  There is no indication that the file is too large or will cause any "performance" issues.
    The concurrency problem can happen with a file of any size.

  • Flash Player on Android, select multiple files

    We have a web app that uses a flash uploader and it works on Android phones and tablets but it will not let us select multiple files on these devices. Is this possible or is there a trick to get these devices to allow us to select more than one file at a time?
    Thank you,
    Keith

    Flash Player for Android is no longer available. For more information, see here:
    http://blogs.adobe.com/flashplayer/2012/06/flash-player-and-android-up date.html
    Android users can still download and install Flash Player from the Archived Flash Player Versions page on the Adobe website.
    Please refer : http://forums.adobe.com/thread/1061194
    Please see this page for a list of all certified devices:Flash Player Certified Devices

  • How do you select multiple files to drag

    How do you select multiple files to drag from one folder to another? Is there a command?

    Open the folder which has the contents you want to transfer.  Press COMMAND 'A' and then all of the data should be highlited in blue.  Drag it to the new folder.
    If only certain files are to be transferred, then you have to select them (COMMAND 'A')  individually and the drag them as a group to the new location.
    Ciao.

  • How to select multiple files with Trackpad

    I am new to Mac and to the Trackpad. I apologize if this has been posted.
    When I work on a Windows PC, if I want to select multiple consecutive files I can click on the first file, press and hold SHIFT and then select the last file and all files in between are selected.
    I tried that using the Trackpad and it doesn't seem to work the same way. Is there another key combination? I can select multiple files by either using SHIFT (on Picasa website for example) and then tap or by holding COMMAND and then tap each individual file. But how do I select multiple files similar to Windows, clicking first file pressing a key and clicking the last file.
    Thanks in advance for any input on this.

    If you choose 'view as list', you can use the shift-key. Select an item, press the shift-key while you press an item below and all the items between are selected.

  • Selecting multiple files with mouse now wonky

    Using Windows 8.1 on HP machine
    All updates up-to-date
    Hardware: Microsoft Intellimouse Explorer 3.0
    Explorer Folder Option selected: Single-click to open an item (point to select); Underline icon titles only when I point on them
    Display: Detail list (Ctrl + Shift + 6)
    No touch input
    Here's the problem: For as long as I have used windows, I can select multiple files by pressing ctrl-left mouse button. If I want to select multiple consecutive files, I move my cursor down to the last file in the list and press shift-left mouse button.
    If I want to select multiple files that are not listed consecutively, I move my cursor along the list of files and press ctrl-left mouse button to select each individual file.
    This does not work for me any longer and I do not know why.
    Often I will press ctrl-left mouse click and the file will not select. When I move my mouse away from the file I've selected, it will UN-select. If I continue to press the CTRL key while attempting to select another file and float my mouse cursor down the
    list of files to select ONE single file further in the list, ALL the files in between the first file I click and the final file will become selected.
    Moving the mouse cursor carefully and steadily to select individual files yields varied results; sometimes I can select individual files; sometimes, I can click multiple times to select an additional file and the file will not become selected. More often
    than not, I will select several files and earlier files will become unselected.
    Extremely frustrating.
    I have been a Windows user since version 3.1 and this has never happened to me. I have been a Windows 8.1 user for over a year now and this is a new wrinkle. I have done system restore multiple times and it has not solved the problem. I have uninstalled
    Intellipoint/Microsoft Keyboard & Mouse center and reinstalled and the problem has not solved. I have checked every setting for my mouse in the mouse center and cannot see a setting that imposes this feature.
    Changing folder options to Double-click to open an item (single click to select) solves the problem. I am able to navigate and organize my files the way I always have. Only happens when single-click feature is enabled. Please note: I have been using the
    single-click select feature since Windows XP.
    Your guidance and actual solution to this irritant is appreciated.

    Hi,
    During my test, I cannot repro this issue even I configure the same setting with you. Maybe a hardware issue or software issue.
    Does this issue happen to other mouse?
    Can you test in safe mode to check how it works?
    Alex Zhao
    TechNet Community Support

  • Command+click and drag to select multiple files

    Hi everyone,
    I switched about a year ago and recently joined this group. I love OS X and will never go back to windoze, however after recently upgrading to Tiger, I went to command+click and drag to select multiple files in order to drag them to the trash, all I succeeded in doing was to drop one file into the next folder down. Did I miss a check box somewhere, or something. It feels like windoze now, having to command+click individual files to select more than one, or use the edit menu to "select all".
    I'm not going back to Panther just to get back this feature I miss, and was hoping there is a way to get it to work in Tiger, any suggestions?
    eMac G4 1 gig superdrive   Mac OS X (10.4.3)   768 megs sdram

    You might find this easy to do in column view:
    1. Select a group of contiguous files by clicking on the first, then hold down the shift key and click on the last one you want, all files between first and last will be selected.
    2. To add an odd file here and there to the group hold down the command key and click on the file.
    Thus you can quickly select an entire group in the middle with click/shift click, then add additional files individually to the selected group.
    Francine
    Schwieder

  • How do you select multiple files on a macbook pro?

    Can anyone tell me how to select multiple files at one time?  I am so frustrated with the way macbook pro works that I really regret buying it.  I hate that you can't select multiple files, and that my contact stuff keeps changing.  It is certainly not like I was told...that I would never want to use a PC again.  I would not buy another apple computer.  I spent a lot of money to NOT be able to do things that I have always done with ease.  Every time I think I have something figured out, it doesn't work the next time I go to use it in another program.  If anyone has an answer to this, I would sure appreciate it. 
    And all of these so called wonderful updates to the operating system on all mac products have left me frustrated and liking my apple products far less than I did before.  On my iphone I had to make the texts just huge to even be able to see the white writing on a blue background.  Not sure who made these designs, but from my perspective, I can tell you they certainly weren't thinking about being user friendly in any way when they did it.  So disappointed in all of my devices!  I do not enjoy using my computer, ipad, or iphone even close to what I did before.

    This is some information on the Finder.
    http://support.apple.com/kb/ht2470
    To select multiple files you can use the shift key with the mouse if they are in a contiguous list or the CMD key with the mouse if you have breaks in that list. You can also use the mouse to drag over the files you want to select.
    The Macs are easy to use, I have used many versions of Windows, Linux and other operating systems and I find OS X is far the easiest, but that is me.
    There are many instructional videos and texts on Apples web site and if you are near to an Apple store they do classes to help.
    Hope you get used to it.

  • How do you select multiple files at one time

    How do you select multiple files at one time

    Select one, and then either command-click another, or in list/column view, Shift-click the item at the other end of the range you want to select. Alternatively, click on a spot in the screen and drag the cursor until all the files are selected.
    (114308)

  • How do I select multiple files under "Get File Info"and lock or unlock all?

    How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

    Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Is there a way to select multiple files and initiate the Capitalize function?

    I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

    You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
    Good luck...

  • Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

    Hi All,
    In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
    Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
    3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
    Error within screenshot are : status Code : 409
    status Text :conflict
    For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
    my code is
    function PerformUpload(listName, fileName, listItem, fileData)
        var urlOfAttachment="";
       // var itemId = listItem.get_id();
        urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
        // use the request executor (cross domain library) to perform the upload
        var reqExecutor = new SP.RequestExecutor(appWebUrl);
        reqExecutor.executeAsync({
            url: urlOfAttachment,
            method: "POST",
            headers: {
                "Accept": "application/json; odata=verbose",
                "X-RequestDigest": digest              
            contentType: "application/json;odata=verbose",
            binaryStringRequestBody: true,
            body: fileData,
            success: function (x, y, z) {
                alert("Success!");
            error: function (x, y, z) {
                alert(z);

    Hi,
    THis is common issue if your file size exceeds 
     upload a document of size more than 1mb. worksss well for kb files.
    https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
    or try the below method
    https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • How to select Multiple files in ADF?

    I have a requirement to select multiple files in my aaplication.
    I know af:inputfile can select only one file and putting more af:inputfile component on the screen is not an option.
    Can someone please help me on this
    Thanks
    RJ

    Hi,
    multiple file uploads is a feature of JDeveloper 12c (upcoming)
    Frank

  • How to prompt user to select multiple files in file dialog using scripts

    Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and then the script would process each one.
    Thanks!

    // Main Code [Execution of script begins here]
    here's what I have so far. it would also be nice to not have illustrator stop at errors.. right now, it skips dialogs but on errors, it still stops.
    // uncomment to suppress Illustrator warning dialogs
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
    var destFolder, sourceFolder, files, fileType, sourceDoc, targetFile, pdfSaveOpts, folderName;
    var fullPath = "";
    var finalSlash;
    // Select the source folder.
    sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator .ai files you want to convert to PDF');
    f = find_files(sourceFolder);
    function find_files (dir)
        return find_files_sub (dir, []);
    function find_files_sub (dir, array)
        var f = Folder (dir).getFiles ("*.*");
        for (var i = 0; i < f.length; i++)
            if (f[i] instanceof Folder)
                find_files_sub (f[i], array);
            else
                if (f[i].name.slice (-3).toLowerCase() == ".ai"          || f[i].name.slice (-4).toLowerCase() == ".eps")
                        //convert the array-listing to a string so we can manipulate it
                        fullPath = String(f[i]);
                        //find the position of the last / to indicate where the filename starts
                        finalSlash = fullPath.lastIndexOf("/");
                        //get the foldername by "slicing" from start to where finalSlash is located
                        folderName = fullPath.slice(0, finalSlash).toLowerCase();                   
                        sourceDoc = app.open(f[i]); // returns the document object
                        // Call function getNewName to get the name and file to save the pdf          
                                                      targetFile_PNG = getNewName(".png");
                                                      if(targetFile_PNG.exists) {
                                                      } else {
                                                                pngExportOpts = getPNGOptions();
                                                                sourceDoc.exportFile(targetFile_PNG, ExportType.PNG24, pngExportOpts );
                        targetFile_PDF = getNewName(".pdf");
                        pdfSaveOpts = getPDFOptions();
                                                      sourceDoc.saveAs(targetFile_PDF, pdfSaveOpts );
                                                      targetFile_SVG = getNewName(".svg");
                                                      svgSaveOpts = getSVGOptions();
                                                      sourceDoc.exportFile(targetFile_SVG, ExportType.SVG, svgSaveOpts );
                        sourceDoc.close();
                        array.push (f[i]);
    getNewName: Function to get the new file name. The primary
    name is the same as the source file.
    function getNewName(ext)
        var ext, docName, newName, saveInFile, docName, finalDot
        var loop = 0;
        docName = sourceDoc.name;
        ext = ext; // new extension for pdf file
        newName = "";
        finalDot = sourceDoc.name.lastIndexOf(".");
        while(loop < finalDot)
            newName += docName[loop];
            loop = loop + 1;
        newName += ext; // full pdf name of the file
              newName = newName.replace(" [Converted]","");
        // Create a file object to save the pdf
        saveInFile = new File( folderName + '/' + newName );
        return saveInFile;
    getPDFOptions: Function to set the PDF saving options of the
    files using the PDFSaveOptions object.
    function getPDFOptions()
        // Create the PDFSaveOptions object to set the PDF options
        var pdfSaveOpts = new PDFSaveOptions();
        // Setting PDFSaveOptions properties. Please see the JavaScript Reference
        // for a description of these properties.
        // Add more properties here if you like
        pdfSaveOpts.acrobatLayers = false;
        pdfSaveOpts.colorBars = false;
        pdfSaveOpts.colorCompression = CompressionQuality.AUTOMATICJPEGHIGH;
        pdfSaveOpts.compressArt = true; //default
        pdfSaveOpts.embedICCProfile = false;
        pdfSaveOpts.enablePlainText = false;
        pdfSaveOpts.generateThumbnails = false; // default
        pdfSaveOpts.optimization = true;
        pdfSaveOpts.pageInformation = false;
        pdfSaveOpts.preserveEditability = true;
        return pdfSaveOpts;
    function getSVGOptions()
              var svgSaveOpts = new ExportOptionsSVG();
              //just using defaults aside from what's written below
      //see http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/references/csawlib/com/adobe/illustrator/ ExportOptionsSVG.html
      svgSaveOpts.embedRasterImages = true;
      svgSaveOpts.sVGTextOnPath = true;
              return svgSaveOpts;
    function getPNGOptions()
              // Create the PDFSaveOptions object to set the PDF options
              var pngExportOpts = new ExportOptionsPNG24();
              // Setting PNGExportOptions properties. Please see the JavaScript Reference
              // for a description of these properties.
              // Add more properties here if you like
              pngExportOpts.antiAliasing = true;
              pngExportOpts.artBoardClipping = false;
              pngExportOpts.horizontalScale = 100; // scaling to 350%
              pngExportOpts.saveAsHTML = false;
              pngExportOpts.transparency = true;
              pngExportOpts.verticalScale = 100; // scaling to 350%
              return pngExportOpts;

  • Selecting Multiple Files With Shift Key

    Am I right in understanding that the only way to select multiple files with the Shift key in Finder is by using File view? Seems kinda silly.
    Thank you, Scott

    I'm at my Snow Leopard machine right now, and I'm not sure that nothing was changed in Mavericks, but I never noticed that it was.
    I have four view modes: Icon, List, Column and CoverFlow.
    I almost always use Column view, but I am guessing that you are calling Icon view File view. In Icon view, Shift clicking seems to work the way Command clicking does in Column view (and probably the other views as well): it allows you to add randomly selected files to the selection. In Column view, Shift clicking works like it does for most things (like text selection); it selects every thing between the previous click and the Shift click.

Maybe you are looking for