Is it possible to draw a circleWITHOUT fill in Photoshop Elements 4?

Hi,
It's been a while since I had Photoshop (version 2, back in my college days), but I just bought Elements 4 to mess around on some prelim logo designs before handing them off to my outside designer.
For the life of me, I can't figure out a way to draw a circle without it being filled in... just a solid circle and a donut seem to be the only options.
Is this feature not available?

Marquee Shortcuts: Press Shift M until you get the elliptical marquee or just press M until you get it if you have the use Shift key for tool switch unchecked in the CS2 preferences. Edit<Preferences<General... HTH, Terri

Similar Messages

Is it possible to draw arrows in imovie

is it possible to draw arrows in imovie

Yes,
Use iMovie 06 with the GeeThree Volume Six Plug-in. Then you can Draw or write anything you like on the video frame.
http://www.geethree.com/slick/galleries/d_v6.html
Lots of other effects are available below.
http://www.geethree.com/slick/index.html
( iMovie 08 - 11 cannot use plug-ins)

Prompt if you please, to me are necessary programs making it possible to draw off music from the network VK, program- analog Ward, program- analog of adob Flesch pleer. if there are free, the thanks a lot

prompt if you please, to me are necessary programs making it possible to draw off music from the network VK, program- analog Ward, program- analog of adob Flesch pleer. if there are free, thanks a lot

Hi Christoffer,
Thanks for the reply, excellent information! I was a bit struggling with the availability of the tokenGroups attribute, but your info makes it pretty clear.
Do you also happen to have experience with the LDAP_MATCHING_RULE_IN_CHAIN method to retrieve nested groups? It seems to perform pretty well, retrieves all nested groups using the memberOf attribute and works on all AD environments (W2K3 SP2 or higher).
Richard Mueller did a performance test using both methods:
http://social.technet.microsoft.com/Forums/fr-FR/f238d2b0-a1d7-48e8-8a60-542e7ccfa2e8/recursive-retrieval-of-all-ad-group-memberships-of-a-user?forum=ITCG
User with 14 groups:
Method                      Groups   Ave. (10 runs) 1 standard deviation
LDAP_MATCHING_RULE_IN_CHAIN    11     0.1664 sec.   +/- 0.0325 sec.
tokenGroups                    13     0.0895 sec.   +/- 0.0038 sec.
Recursive memberOf             11     0.0774 sec.   +/- 0.0021 sec.
User with 308 groups:
Method                      Groups   Ave. (10 runs) 1 standard deviation
LDAP_MATCHING_RULE_IN_CHAIN   305     0.2664 sec.   +/- 0.0151 sec.
tokenGroups                   306     1.2147 sec.   +/- 0.0271 sec.
Recursive memberOf            305     1.2813 sec.   +/- 0.1190 sec.

Possible to draw power from iPhone battery?

Is it possible to draw power from the iPhone battery in order to power an external device? If so, how does one go about doing it?
Thanks,
Colin Marcus

Colin:
Did you ever get an answer to your question? I have the same one.
Thanks!
Tom

Is it possible to draw a line on a clip?

This relates to
OS X
Premier & Photoshop Elements 9
I want to create a line, with arrowhead, to point out something in a clip. My preference is to have the line appear as though it were being drawn, hence it might be a wipe.
I can see at least one method of simply adding a line. Take a frame and add the line in Photoshop E, then insert the frame back into the clip sequence.
However, I can't see if there is a way to make the line dynamic as described above. As an example think of the way sports commentators draw over a play to indicate the tactics that are being executed.
My question: Is there a way to accomplish a "dynamically appearing line" using Pre and PE?
Thanks

Now for the rest of your questions.
Yes, that "revealing" was what I was talking about, and Keyframing the Crop Effect should allow you to reveal over time, as you want.
As for the circle, there is a bit more involved, as the Crop, or Linear Wipe Transition will work in a linear fashion, unlike how a circle would be actually drawn. Same as with cursive Text, in a "handwriting" font. To do those, I first go into Photoshop, and create say my circle, as I want it to appear in the final. This will be my last Frame of the animation. Then, I create a Layer Mask to cover up the circle. This will be my first Frame. With say the Eraser Tool, set to a soft-edged Brush, I will Frame-by-Frame Erase parts of the Layer Mask, doing a Save_As PSD, for each step. This will yield every intermediate Frame in the process, and when Imported, and placed on the Timeline, will appear as the circle (or handwriting font), being drawn by hand. Before Import, adjust your Still Duration (in Edit>Preferences) to about 3 - 5 Frames, and then place a Cross-Dissolve between each Frame. I also temporarily set my Transition Duration to be very short. The exact Duration of the stills (the PSD's), and the Duration of the Transitions might require some tweaking, until you are satisfied with the smoothness.
I had to animate about 10 lines of cursive handwriting Text for a DVD Menu, and even with PS and my Layer Mask, it took several hours, then a bit more to find the right Duration and Transition Duration, but the effect was worth the effort. I then added an SFX of chalk striking a chalkboard (for the start of each letter/word), and an SFX of chalk writing on a chalkboard to complete the effect. A circle would be much easier.
Good luck, and hope that this helps.
Hunt
PS - I also used a bit of "distress" for the handwriting, so that it was not 100% on the edges, but that was an easy effect, as it only had to be applied to the complete Frame, and thus was visible as each part of each letter/word was "revealed" by the Layer Mask. I forget if PSE has Layer Mask, or not.

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

Yes, I see:
Letzte Aktualisierung
16.04.2012
The link I gave is listed in the faqs of this forum.
Photoshop Elements FAQ List
mfG
Michel

Photoshop Elements 11 boxed software installed once in Dec. 2012 won't install on new computer. Disk can't be read (tested on 3 different computers). How is that even possible of a meticulously clean, well-protected disk?

Dear Adobe,
I need your help!
On December 12th, 2012 I ordered (purchased) by mail an official copy of the boxed Adobe Photoshop Elements 11 software from B&H Photo (New York, NY). I installed it successfully without any problem on my then computer. I have enjoyed using the program since then, it’s great. This past week, however, that same computer died and I was force to buy a new computer (Windows 8.1).
To my big surprise, the Elements disk wouldn’t load off my DVD drive. The drive just kept “clicking” for 20 minutes. After trying several times from reboot, for an hour and a half, I then tried installing it on my laptop, just to see if my drive was faulty. No, it wasn’t. It too immediately went into an endless “clicking” routine trying to read the disk. And for one last try, I put it in my sister’s laptop and she got the very same result - endless “clicking”, no install. No computer could read the disk!!!
How is this even possible from a commercially made disk I used only once in 2012! The disk is meticulously clean, unscratched, unscuffed, put away in its original box and stored on my shelf in a cool place away from the sun!
Serial Number of faulty disk: 1057-4186-6029-0039-1511-3940
Is there anything you can do about this as I see no reason why I should be forced to spend over a $130 (in Canada) to replace a disk that worked only once!
Regards, Andre

copy your disc contents to a desktop directory. install from that directory.
if that fails, download the installation files:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

Problem with Photoshop Elements 11 - I am trying to create a fill layer

I am trying to create a fill layer. I am really missing something but I don't know what it is. I bring up a photo, go into Expert. i click layer at the top then click new fill layer and solid colour. It all works but then that is all that I can see and I cannot make it a background and put the picture in it.

Elements has its own forum Photoshop Elements
Element most likely has more the one way to do that. Photoshop does. In Elements advance mode in the layer palette the is an Icon the can be use to add different types of layers and the layer menu also has items to add different type of layers.

I had Adobe Photoshop Elements 4.0 on old computer but find folder is now empty is it possible to restore from Adobe?

I had Adobe Photoshop Elements 4.0 on old computer & transferred to new computer - this file is now empty, so I must have deleted photos. Is it possible to restore them?

Photoshop Elements 4 is too old. It was written for PowerPC Macs and will not work on new Intel Macs. There is nothing you can do about it.

I am using a Mac OS 10.9 and i can't type into a PDF form. I have adobe reader and another adobe product (adobe photoshop elements 12). Is there a way i can fill out a form and email?

I have adobe reader and adobe photoshop elements 12. I need to fill out an Adobe form, save it and email. I have tried creating a text box but the formatting is horrible. I need help please.
Thanks,
Eunice

It's a fillable form. I have Adobe Reader version 11.0.07. I was trying to fill the form, save and email. It is a public form and here's the link to the form: http://booksamillioninc.com/public/Revised_w_Gift_Card_info_2014-Donation_Policy_Procedure _and_Request_Form.pdf
I am unable to click/ type in the fields.
Thanks!
Eunice

Photoshop Elements 13 - Is it possible to create a link in an image?

Photoshop Elements 13 - Is it possible to create a link in an image?

No, you would need to use your web design program to do that.

Content Aware Fill in Photoshop CS5.5 has quit working

Content Aware Fill in Photoshop CS5.5 has quit. Was working just fine now nothing happens.

Please read these and proceed accordingly (restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be of special interest):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Is it possible to make a planning on a cost element group?

Is it possible to make a planning on a cost element group? I have created several cost element groups with the appropriate hierarchy. Now my aim is to try to allocate cost on an element cost group.
Thank you in advance for your reply.
Best regards
Pascal Cuenin

Yes you can - There are multiple ways of doing it.
If you have the BPS module, you can do it over there - If you want to do it in R/3, you can there too. Go to KPZ3 to view previous budget planning for Cost Center Groups.
Hope that helps.
Thanks,
Nandita

Is it possible to burn a data disc in premiere elements 10?

Hi,
I would like to know if it is possible to burn a data disc in premiere elements 10 rather than copy a whole project. I understand that I would be able to make further copies from this disc. Is it possible and is this information correct?
Dave

I am not sure I understand your question... Premiere Elements is a video editing program, with disc output being a MOVIE DVD or BluRay
I think you need to use a different product to write computer files to a DATA disc
For Windows, use the FREE http://www.imgburn.com/index.php?act=download
(send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons
The Elements Tutorial Links Page http://forums.adobe.com/thread/1275830 has links about sharing to a disc

Is it possible to draw a circleWITHOUT fill in Photoshop Elements 4?

Similar Messages

Maybe you are looking for