Is it possible to edit parameters of an object in the environment using a midi controller?

Is it possible to edit parameters of an object in the environment (such as the key parameter of a chord memorizer) using a midi controller?

Anyone know what I can do? Maybe even some kind of setup in the environment that will do this?
Thanks

Similar Messages

  • Is it possible to edit spoken dialog without interfering with the rest of the sound?

    I'm trying to piece together video clips from various movies, and in one of these clips the character swears strongly a couple times. Normally, I don't bother with this, but my audience is that of a "clean" nature and is strongly against profanity. Is there a way to briefly mute, or change the character's voice when he cusses and not interfere with the rest of the sound? Or is this asking too much?
    Also, I looked in the "help" section and couldn't find anything to help me with this. But I have a bunch more questions. Where do I go that will explain all the features of Premiere Elements 8, without forcing me to spend hours figuring it all out and/or posting a billion discussions here in the forums and bugging all of you with my lack of knowledge?

    What you are attempting to do requires a bit of work and then some luck.
    It sounds as though you have an Audio Clip with both background noise and possibly music, plus dialog. You wish to remove just the dialog in a particular spot, or spots. Is that correct?
    If so, then in an Audio editing program, like Adobe Audition, you can possibly extract the ambient sound/music with a Karaoke Effect, or with the application of EQ. This will yield a separate file with hopefully just the background and music, and no dialog. In a Multi-Track Session, place both files on a separate Track. Find the point where you wish to remove the dialog. Here, the workflow might differ, but I'd Cut out the dialog at that point, leaving only the Karaoke Track. To clean things up, when I had done this for each offensive passage, I would go to the Karaoke Track and do just the opposite - Cut out all that was NOT underlying the offensive passages, but leave a bit of that Track before and beyond the deleted dialog. Then, I'd add a Cross-Dissolve for Constant Power to those Karaoke segments to "ramp" the Karaoke Track into the mix, as it will never be perfect, and one wants as smooth a transition, as is possible.
    Now, one can do this in other audio editing programs, that offer Multi-Track editing, and also VST plug-ins, or install with Effects like Karaoke and/or Parametric or Graphic EQ's. You could explore the great, free audio-editor, Audacity, and Google for VST's that will enhance its capabilities. Be sure to read the Help files on Audacity, as one does need to do a few things in setup to allow the addition of more VST's.
    The work will be with the Karaoke (or similar) Effect, its result and also the frequency ranges of the speaker. That is where the "luck" comes in. Much human speech can be EQ'ed out, or at least greatly attenuated. Now, if you have a crowd talking in the background, or similar, and wish to retain that, all bets are off.
    Also, if you only have ambient sounds, and no music, behind the speaker, just find segments of that ambient sound, where the speaker is not talking, and use that to "patch" where you cut out the dialog.
    Good luck,
    Hunt

  • Is it possible to edit my PDF files online with the best quality and Security?

    I want to convert my PDF files online with best quality and Security.
    Is this possible that I can edit my PDF files online? if yes, please tell me how and where I can convert it.

    You could try this service here, this improves security once you have a PDF ready; http://bookguardpro.com/
    There is also a Protect PDF blog that shows you how to boost your PDF security; http://bookguardpro.com/protect-pdf-blog/

  • Is it possible to edit a VIs block diagramm via the Internet (online programming) ?

    Hi folks,
    is there a way to alter the block diagram via the internet?
    eg: i have a PC with Labview installed in my Lab and i want to alter a vi on this PC with my laptop at home (with installed runtime).
    thx & kind regards,
    mike

    http://www.uvnc.com/features/index.html
    This VNC client/server package includes an embedded JavaViewer so that you could control the other PC via an internet browser.
    ALSO depending on your end purpose you could send someone a small executable to allow you to control their PC versus trying to get full VNC Server to work on their side.
    Matt Holt
    Certified LabVIEW Architect

  • Is it possible to change order of plug-ins in the environment?

    Hi
    I know how to change the order of the plug-ins in the arrange window (command and drag). When I try this in the environment it changes to the midi assign tool instead. Does anyone know of a way to change the order of pluggins on audio objects in the environment?
    Thanks

    May I ask why you want to do this?
    cheers
    rob

  • Is it possible to edit the alarm popup menu?

    I notice that, when I set a new event or to-do, the alarm popup menu has two sections: the top one describes "methods" (Message, Message with Sound, etc.); the bottom one lists a few odd combinations (for example, "Message with sound (Frog) 15 days before").
    The items on this second list seem to have been "saved" from earlier choices I made when I set alarms for particular events. But I'd like to edit this list: add certain combinations I like and remove ones I don't use.
    Is it possible to do this?
    And by the same token, is it possible to edit (add,etc.) options in the popup menus for those little screens that actually "perform" the alarm (stating the message)?
    Thanks,
    Stuart Sherman

    The 1st question might be able to be partially addressed by deleting the preferences files (resetting the defaults)? I'm assuming Apple set some defaults. Alternatively (or additionally) a call to 800-apl-care might get you more info.
    The 2nd question: No way known to me.

  • Edit Objectives and other columns using PHAP_ADMIN : SAP Appraisals

    Here is a common scenario that we are having problems setting up. We are on SAP 4.7 - ext 1.1. We have annual MBO ratings where the employee's objectives are rated by the manager. The employees create their objectives in the system using T.code PHAP_CATALOG. We have created OSA templates where in the Objectives can be only changed by appraiser and manager can only display. This is configured in the template using column access. (For example in planning stage the column access for objective setting is set to: Column Owner - Appraisee, Planning Owner- Change, Planning Others - Display.)
    However, we would like the HR Administrator to be able to edit the objectives in planning status and subsequently other columns in the appraisal document. However in transaction PHAP_ADMIN the objectives are grayed out and the HR administrator cannot change the objectives of employs are edit anything in the document. This is probably because the column access is set to display for others. The role given is an exact copy of standard SAP delivered role for appraisal administrator. We have included P_Origin authorization object also.
    I understand PHAP_ADMIN should over rule and enable changes by the administrator.
    How do we manage this requirement?
    Thank You

    Hello,
    This is the outcome of my research on this issue. Granting full access to administrator users is not the default behavior in PHAP_ADMIN for 620. It was introduced to 640 and unfortunately cannot be down ported.
    However, We could give full access to the administrator using BAdI 'HRHAP00_COL_ACCESS'  and this had the same effect. The necessary coding for method 'GET_COLUMN_ACCESS' looked like this:
    | * If the transaction is PHAP_ADMIN allow full access
    | IF sy-tcode CP 'PHAP_ADMIN*'.
    | column_owner = 'X'.
    | availability = 'X'.
    | ENDIF.
    I would like to give due credit to Alexander Esslinger from SAP, who helped us solve this problem.
    Thank You
    Magesh

  • On the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the

    I am using a brand new iPad Air and a MacBook Pro with Retina and  on the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the arrows in the menu. It is not possible to jump to a certain page as well. The overall speed is incredible slow to switch between pages.

    Exact same problem here - Win 7, ADE V3.0.  -  pages wont turn unless I click on the symbol at the top RHS of screen for Full/Normal size screen after Page Up/down or a click on the contents page.
    Hopefully a bug or something, and not a 'feature' :-)

  • Is it possible to edit a file made with 8.1 for word using acrobat 9 pro??

    I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
    When i select the tools menu, no options become available and there is no secuirty enabled on the file.
    Thanks
    Tony

    bluuskii wrote:
    I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
    When i select the tools menu, no options become available and there is no secuirty enabled on the file.
    Thanks
    Tony
    If you have Acrobat Pro Extended that is a PC Product. You've clicked on wrong Forum. Go back to main page the click on Acrobat and choose PC forum. Extend has such features as XML based PDF Forms which Acrobat Pro Mac can't handle.

  • Is it possible to edit a DNG file in Photoshop and get back to Lightroom?

    Hi,
    The question title probably doesn't explain much what I'm looking for...
    I shot in RAW and then converted to DNG, I like DNG and I can't understand what so many people have against it, anyway that's not the point...
    I know have the DNG as my digital negative instead of the original RAW file and I start to do some editing in Lightroom. But then I realized that Lightroom is not enough for something I want to do. For instance, just today I had this picture I needed to remove some people and I had to use heal/clone but as you know, Lightroom's clone and heal features are not as flexible as Photoshop ones.
    So now I needed to go into Photoshop, fix the photo and get back to Lightroom and continue my editing. However, I couldn't find a way to do it how I wanted to do... What I did was open the original (unedited) DNG in Photoshop, Adobe Camera Raw pops up and I ignore it, remove the people from the photo and save as TIFF. Then, back in Lightroom I open the new edited TIFF and copy Lightroom's settings from one photo (the DNG) to the other (the edited TIFF).
    This workflow sucks and I know there are some options in Lightroom to automate it, but still, I don't think it would solve my problem. At least I couldn't find a way to do it...
    What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG. But take a note here that those changes could very much be destructive, I'm not talking about ACR or Lightroom's non-destructive editing, the removed people would be gone forever unless I draw some new ones. I really wanted to edit and save some changes on the DNG in Photoshop and keep editing the DNG in Lightroom without using a TIFF in between, do everything in the DNG.
    Is this possible or not at all?

    Ricardo.Amaral wrote:
    What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG.
    sorry, no can do...ain't gonna happen.
    What you've done is hit the wall on is the basic difference between lite duty spot healing and photo level tone and color correction (Lightroom and Camera Raw) and heavy duty pixel retouching in Photoshop.
    When you need to substantially manipulate the "pixels" you need Photoshop and you'll be forced to render the raw file into a TIFF or PSD file either through Camera Raw or more better, via Lightroom.
    You can do the basic tone and color correction directly in Lightroom and edit in Photoshop from Lightroom. But you will NEED to create and save out a "rendered" image that is no longer raw...then retouch to your heart's desire, save it and it'll be available in Lightroom along side your original raw if you choose.
    But no, there's no way to open a raw in Photoshop, manipulate the heck out of it with massive retouching then save that back out as a raw file...ain't gonna happen.

  • Is it possible to edit a google site using dreamweaver

    I'm using google sites for some of my low price costumers, and i was wondering what options exsist to use dreamveaver to update some of the gadgets like the text gadget.
    I know google does not support connecting fully with deamweaver or any other editor for that matter, but are there any plans for doing this in the furture, and what minot things can be doen at the moment ?
    Tomas
    søgemaskineoptimering-århus

    t259 wrote:
    I'm using google sites for some of my low price costumers, and i was wondering what options exsist to use dreamveaver to update some of the gadgets like the text gadget.
    I know google does not support connecting fully with deamweaver or any other editor for that matter, but are there any plans for doing this in the furture, and what minot things can be doen at the moment ?
    Tomas
    søgemaskineoptimering-århus
    To answer your specific question "Is it possible to edit a google site using dreamweaver" the answer is NO.  The reason is that Google does not allow uploading of web pagesusing any means such as FTP.  Google provies hundreds of templates to choose from and like you I don't like them at all.
    Microsoft had a free service long time ago that allowed you to upload your own pages but this has been stopped for new customers.  New customers are required to sign up to their Office 365 Service <http://tinyurl.com/bucc6t4> and this costs money.  However, you can build and host a website with a custom domain for your business.using their free software called Microsoft Sharepoint Designer 2010 <http://www.microsoft.com/download/en/details.aspx?id=16573>.  I believe they also have a 64 bit version to download but I only use 32 bit on my 64 bit systems!!
    Hope this helps.

  • Is it possible to edit stylesheets?

    I would like to edit the stylesheets in the latest (September 2013) version of Pages for iOS. Is it possible in this latest version? I know the previous version did not support editing of stylesheets by the user.

    Style sheets are generally in reference to web site development. Are you asking if you can change the styles included in a document? Maybe by loading another documents styles?
    If you have a document you made on another word processor program and open it in Pages, it will preserve your custom styles and you can continue to use them.
    Jason

  • Is it possible to edit default string for Comment?

    When I add a comment to Pages, I find that my name as well as the current time prefix the starting point of the comment.  Is it possible to edit this default so that only my name is inserted and not the current time?
    Regards,
    Raj

    You can change the name in the Pages preferences > General. The time you have to delete each time.

  • Is it possible to edit vector art pasted into Pages 4.1?

    Is it possible to edit a vector shape created in Illustrator and pasted into Pages 4.1? I can adjust the transparency, scale it, even put a drop shadow on it, but I can't change the color which is all I want to do.

    It has a drawing tool at the end of the Shapes menu but it is oddball and a little clumsy compared with what Illustrator offers and it only edits Pages' native objects.
    Peter

  • Is it possible to pass parameters through eventlisteners?

    Hello everyone!
    Inside a .fla file I have some buttons and each button will tween a different image to the stage. All the images are outside the stage in the same x and y position and I just need to tween the x coordinate.
    Now I'm working with an external document class where I'm trying to hold all my functions and I'm stucked with the Tweens. I'm willing to stay away from the flash tween engine and I'm trying to work with tweenLite.
    My question is: Is it possible to pass parameters through eventListeners so I can use something like this inside my docClass?
         public function animeThis (e:MouseEvent, mc:MovieClip, ep:int):void { //ep stands for endPoint.
         TweenLite.to(mc, 2, {x:ep});
    If this is possible, how am I supposed to write the listeners so it will pass the event to be listened for AND those parameters? And how to build the function so it will receive those parameters and the event?
    If this is not possible, what's the best approach to do this?
    Thanks again!

    So, I understand you need to match buttons with corresponding visuals.
    Here is a suggested approach.
    Since SimpleButton is not a dynamic class, I suggest you have an enhanced base class for these buttons that extends SimpleButton. What is enhanced is that button has reference to the target.
    I wrote code off the top of my head and it may be buggy. But concept is clear:
    This is base class for all the buttons:
    package 
         import flash.display.DisplayObject;
         import flash.display.SimpleButton;
         public class NavButton extends SimpleButton
              public var targetObject:DisplayObject
              public function NavButton()
    Now, this is your doc class that utilizes this new buttons:
    package 
         import flash.display.DisplayObject;
         import flash.display.MovieClip;
         import flash.display.Sprite;
         import flash.events.Event;
         import flash.events.MouseEvent;
         public class DocClass extends Sprite
              private var btnArray:Array;
              private var visuals:Array;
              // references to objects being swapped
              private var visualIn:MovieClip;
              private var visualOut:MovieClip;
              public function DocClass()
                   if (stage) init();
                   else addEventListener(Event.ADDED_TO_STAGE, init);
              private function init(e:Event = null):void
                   removeEventListener(Event.ADDED_TO_STAGE, init);
                   // buttons and MCs shouldn't be in the same array - otherwise it is counterintuitive
                   // assuming all the objects are on stage
                   btnArray = [price_btn, pack_btn, brand_btn, position_btn];
                   visuals = [g19_mc, g16_mc, g09_mc, g04_mc];
                   configObjects();
              private function configObjects():void
                   var currentVisual:MovieClip;
                   var currentButton:NavButton;
                   for (var i:int = 0; i < btnArray.length; i++)
                        currentVisual = visuals[i];
                        // hold original positioin
                        currentVisual.hiddenPosition = currentVisual.x;
                        currentButton = btnArray[i];
                        // set target MC
                        currentButton.targetObject = currentVisual;
                        currentVisual.addEventListener(MouseEvent.CLICK, placeObject);
                        currentButton.addEventListener(MouseEvent.CLICK, placeObject);
              private function placeObject(e:MouseEvent):void
                   // if NavButton is clicked - make new visual targeted for moving in and currently visible object subject for moving out
                   if (e.currentTarget is NavButton) {
                        visualOut = visualIn;
                        visualIn = NavButton(e.currentTarget).targetObject;
                   else {
                        // otherwise - move visual out
                        visualOut = visualIn;
                   swapVisuals();
               * Accompishes visuals swapping
              private function swapVisuals():void {
                   if (visualIn) TweenLite.to(visualIn, .3, { x:0 } );
                   if (visualOut) TweenLite.to(visualOut, .3, { x:visualOut.hiddenPosition } );

Maybe you are looking for