Is it possible to edit PR posted in R/3...?

Hi All,
Iam using a classic scenario and a shopping cart is created an a PR is posted in R/3. Is it possible for me to the edit the PR from SRM. If yes, how do we go with it.
Thanks,
Bert

Bert,
In one implementation, the approach we used was:
1. Delete item in R/3 PR.
2. An email is triggered to SRM requisitioner, with detailed note
3. If item was still required, requisitoner creates new shopping cart.
4. Approval of shopping cart and new requisition in R/3.
Let me know if it helps. For plan driven procurement, the BSP documents will be useful.
Regards,
Ram

Similar Messages

  • Is it possible to Edit Bankchallan posted thru J_1EWT_BANK_UPDATE

    Hi All,
    I have updated Bank Challan number wrongly in J_1EWT_BANK_UPDATE.
    This Tcode is similar to J1INBANK.
    Is there any option to edit this?
    OR, need to reverse thru J1INREV and post a new challan?
    thnx in advance.
    Edited by: Santosh Babu on Jun 10, 2009 7:07 AM

    I am sharing below my planned steps .....
    1) Extract Excise Register thru j2I5 till 31.03.2009
    2) Change Closing Balances and Excise amount  in J_2IACCBAL for the date 31.03.2009 ( or in the last record of the 2008 Financial Year)
    Like if balances appearing in table are
    Opening = INR 100000
    Closing = INR 120000
    Ex AMT = INR 20000
    While actual closing balance of FY 2008 was INR 0 then following changes I am planning to do directly in table
    Opening = INR 100000
    Closing = INR 0
    Ex AMT = INR -100000
    3) Now extract data for APRIL '09 , I will pick INR 0 as the opening balance and calculate the closing based on the EXCISE TRANSACTION (EXCISE AMOUNT) done in the month of April.
    Let me know if this approach is correct ..... PLUS I also want a validation in J2I5 such that noone could execute it for any date < = 31.03.2009 ( I dont want to get my J_2IACCBAL disturbed ) , HOW CAN I PUT THIS VALIDATION , is there is any BADI / USER EXIT available for J2I5 ??
    Regards
    Shrey

  • How to edit a post in Apple Support Comunities?

    If I just posted something and saw it had typos.   Is there any way to edit the post or remove it?  I have searched all over for an option to edit my post and see none.  I saw someone say that it was possible to edit within 15 minutes of making the post, but no mention of how to do that.

    Not sure how fair it would be to leave the initial authorship content
    open for editing too long after the thread was up, since that could
    make replies to original content irrelevant, or discordant over time.
    And people would be more reluctant to offer advice if the first topic
    were to change; since nobody else can go back very far to change
    the replies. Also, we'd not want to subscribe to a thread if the name
    of it changed several times a week.
    New to the community? Start here
    Rules are there, too, in a helpful way so as to keep order and a civil
    concept for those who appear on the scene later to see a pattern in
    how things are done, usually a workable path...
    •Apple Support Communities Terms of Use
    Yet rules can be cumbersome for certain individuals with independent
    idealism and exuberant vitality. Even so, society and these ASC
    discussions need continuity.
    Can we be fashionable, even if seen as part of a cult by some?

  • LT01 - Is it possible to modifiy the posting date?

    I would like to transfer some quantity of a material from one storage bin to another storage bin. Is it possible to set the posting date? Form LT01 transaction is not possible to set the posting date. System takes the actual day.
    Thanks in advance.

    Hello,
    There is no work around to change the Posting date As i if try to move  Matrial between the Bins by changing the Dates it always pick the Current system date and Time.
    regards,
    rakesh
    Edited by: RAKESH ASHOK MANE on Sep 6, 2010 12:54 PM

  • Can not edit my posts

    Hi, can someone here confirm that editing posts has been disabled I'm trying to edit a previous message of mine but the option for editing is missing. The forum software says I am logged with my correct ID and password.
    <edit>
    Actually it appears the system doesn't allow message editing if someone has replied after it. I don't recall this being the case for this forum unless it's been changed??
    Richard S.

    Hi guys
    I can edit all my postings but after someone has replied to my question Im not able to edit the posting.
    I think its a usual forum function. But sometimes Im also not able to edit my posting. Dont know why. Possibly it has something to do with the cookies or the ID time out.

  • Is it possible to edit an iWeb on 2 computers

    Is it possible to edit an iWeb on 2 computers - i.e. from my work- and from my homecomputer.
    I have a external harddisk that travels with me.

    Arjen ~ Welcome to the Support Communities. Yes, it's possible. Transfer iWeb's key Domain file (containing your site data) usually located here:
    ...More info in this post:
    Editing my iWeb page from another computer

  • Is it possible to edit the MS-Word "Print It!" on a standalone topic?

    Is it possible to edit the MS-Word "Print It!" on a standalone topic?
    The topic would need to be edited in the Topic Editor and republished for the edits to be included in the standalone topic.
    Best regards,
    Marc

    This has been posted to the UPK forum:
    Is it possible to edit the MS-Word "Print It!" on a standalone topic?
    Best regards,
    Marc

  • Allow the user to control the width of the edit forum post input box

    I would like to control the width of of the edit-forum post input box.  This could be:
    automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
    have a user global preference to set the preferred width
    at least, allow the user to change the width via the change size icon.  The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
    Here is an example of an over extended right margin:
    Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
    Robert

    Testing
    Standard Reply box can be height adjusted but not width.
    Same with Advanced Editor
    No Adjustment at all in HTL Editor
    Edit.
    The Edit uses the Advanced Editor
    Only Height Adjustment again.
    I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
    This may have been a post in the lounge.
    It didn't actually try it at the time but have played with it since and have not seen it.
    Maybe it is something they "Fixed" in both senses of the word.
    Second edit.
    I can't alter the box that currently reads "Message Edited by:- ..."
    I also can't get this box to accept New lines  (they appear in the box but don't post that way)
    Corrected Spelling
    9:51 PM      Wednesday; May 11, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)
    Message was edited by: Ralph Johns (UK)
    and new line with a line space as well

  • Is it possible to do manaul posting from FI if the customer blocked

    Dear All,
    If the customer blocked in all the sales areas, is it possible to do manual posting from FI.
    Kindly clarify.
    Regards,
    Mullairaja

    hi raja,
    yes, you are right because even sales area is blocked also you can post in FI
    if it is blocked with COMPANY CODE LEVEL, then its a problem
    hope this clears your issue
    balajia

  • Is it possible to edit a file made with 8.1 for word using acrobat 9 pro??

    I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
    When i select the tools menu, no options become available and there is no secuirty enabled on the file.
    Thanks
    Tony

    bluuskii wrote:
    I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
    When i select the tools menu, no options become available and there is no secuirty enabled on the file.
    Thanks
    Tony
    If you have Acrobat Pro Extended that is a PC Product. You've clicked on wrong Forum. Go back to main page the click on Acrobat and choose PC forum. Extend has such features as XML based PDF Forms which Acrobat Pro Mac can't handle.

  • How can I edit a post I've already posted?

    I saw a button that said "Edit this post." I clicked it and got a notice that I must log in before editing my post. I was already logged in. Completed the longin info again, but still kept getting the message that I had to log in first. Closed Safari, reopened, re-logged in, went to the post, and then the button for editing the post was gone.
    I see some discussion in this forum, but have not found a post telling exactly how to make the edit function work. Nor do I get results searching on "edit" or "edit post" or "edit forum post."
    Nor do I find any mention of this in the Help section.
    I did see one place where a person was asking a host to edit one of his posts. This could imply we can't edit our own posts; but then what is the edit button on a posted post for? In any case, it seems there should be some info about this somewhere, and perhaps the dialog box could be more explanitory (as in saying we must log in, when we already are).
    Thank you.
    I WAS able to edit THIS message. This time the Edit button worked. Maybe the other time was a fluke, or maybe there is a time limit on hitting the Edit button. But again, why was that guy asking a host to do his editing. Any clarification would be helpful. Alas, I now see only two choices: a button to Discard and Cancel, and a button to Edit Message. I'll go with the latter and see if it means "Post."

    Hi ChicagoLarry!
    If the 15 minute, Edit time span has elapsed, but you still have the post that you want to edit, open in a browser window, the  Edit icon, will still be evident.
    But as you have discovered, if you click on it, you will be asked to login, which doesn't really make any sense.
    Ideally, the message would be more like "You're allotted time to edit this post has expired."
    I've made a suggestion to the Hosts.
    Also, each time you edit an entry, the edit time is extended.
    For example, if you edit a post 10 minutes after the initial time of posting, you will then have another 15 minutes, in which to edit again.
    Each subsequent edit, adds another 15 minutes.
    The discretionary editing of posts, by the Hosts, is usually done only for violations of the TOU, posted personal info, serial numbers, Email addresses, posting of commercial Websites, etc., not for misspellings, punctuation, or other minor posting errors.
    ali b

  • Possibility to register Pre-/Post-Procedures for an SQL Template Handler

    I would appreciate to see the possibility to register pre-/post-procedures for an SQL template handler in ORDS 3.0.
    Why:
    We use Oracle VPD/Row-Level-Security to secure data access. Hence a trigger sets a couple of attributes in the database session context at login time which are then used in static RLS predicates to limit which records the user can see/modify.
    With ORDS 3.0 all sessions are opened under the same technical user (e.g. APEX_REST_PUBLIC_USER), hence all users have the same/no attributes in the session context and could see/modify all data.
    To avoid this situation, I need to set the attributes (e.g. the authenticated user) in the database session context before the actual query/plsql handler is executed.
    Also, resetting the session context after the handler is executed would be good.
    This scenario is in line with scenarios 'One Big Application User' and 'Web-based applications' in http://docs.oracle.com/cd/B28359_01/network.111/b28531/vpd.htm#DBSEG98291.
    Different solution approach:
    Kris suggested to write a PL/SQL handler where the pre-procedure is called before the business logic procedure/query. This is ok for me as long as I modify data and only need to return no or little data.
    As soon as I need to return a lot of data (e.g. select c1, c19, c30 from t1), this approach will force me to write a lot of code in the PL/SQL handler in order to marshal the c1, c19 and c30 to JSON and put it in the HTTP response.
    But this is the beauty of ORDS - I can simply define a template, write a GET SQL Handler 'select c1, c19, c30 from t1'  and have the data available as REST service, without writing any code to write JSON marshaled data in the HTTP response.

    I tried to log the request at Oracle REST Data Services (ORDS) but I could only start a new discussion: Possibility to register Pre-/Post-Procedures for an SQL Template Handler
    As I mentioned there, the PL/SQL handler approach works for me as long as I have no or only little data to send back to the client (e.g. put/post/delete succeeded or an error message why the call failed).
    If I need to return a lot of data from the PL/SQL handler I would need to, as far as I understand, to marshal the data to JSON and write it to the response body in the PL/SQL handler.
    I don't want to do the marshaling, because ORDS does it better.
    However, this works for me:
    I write a pipelined stored procedure that takes as input the attributes I need to set in the session context. I then can reference it in the SQL handler:
    select * from table(my_pipelined_function(:USER, ....)
    Now the JSON/HTTP response is created by ORDS again.
    I still needed to code a couple of lines, but it is way better than duplicating the functionality already existing in ORDS.
    With the hooks it would be perfect because I would not have to write any code (apart from the procedure to set the session context attributes), just configure the REST services in ORDS.

  • Is it possible to edit a google site using dreamweaver

    I'm using google sites for some of my low price costumers, and i was wondering what options exsist to use dreamveaver to update some of the gadgets like the text gadget.
    I know google does not support connecting fully with deamweaver or any other editor for that matter, but are there any plans for doing this in the furture, and what minot things can be doen at the moment ?
    Tomas
    søgemaskineoptimering-århus

    t259 wrote:
    I'm using google sites for some of my low price costumers, and i was wondering what options exsist to use dreamveaver to update some of the gadgets like the text gadget.
    I know google does not support connecting fully with deamweaver or any other editor for that matter, but are there any plans for doing this in the furture, and what minot things can be doen at the moment ?
    Tomas
    søgemaskineoptimering-århus
    To answer your specific question "Is it possible to edit a google site using dreamweaver" the answer is NO.  The reason is that Google does not allow uploading of web pagesusing any means such as FTP.  Google provies hundreds of templates to choose from and like you I don't like them at all.
    Microsoft had a free service long time ago that allowed you to upload your own pages but this has been stopped for new customers.  New customers are required to sign up to their Office 365 Service <http://tinyurl.com/bucc6t4> and this costs money.  However, you can build and host a website with a custom domain for your business.using their free software called Microsoft Sharepoint Designer 2010 <http://www.microsoft.com/download/en/details.aspx?id=16573>.  I believe they also have a 64 bit version to download but I only use 32 bit on my 64 bit systems!!
    Hope this helps.

  • Is it possible to edit parameters of an object in the environment using a midi controller?

    Is it possible to edit parameters of an object in the environment (such as the key parameter of a chord memorizer) using a midi controller?

    Anyone know what I can do? Maybe even some kind of setup in the environment that will do this?
    Thanks

  • Is it possible to edit default string for Comment?

    When I add a comment to Pages, I find that my name as well as the current time prefix the starting point of the comment.  Is it possible to edit this default so that only my name is inserted and not the current time?
    Regards,
    Raj

    You can change the name in the Pages preferences > General. The time you have to delete each time.

Maybe you are looking for