Is it possible to edit text in a logo?

I need to edit text of one of my logo  adult dating website, is it possible to do it with photoshop?
How to do it, i try with paint but doesn't work.
The logo in question is the anonymous one.
Thanks,
[links removed]
Marcus Levine
P.s: I need full tutorial on how to do it cause it's been a full 3 days without success.
[links removed]

Hi Marcus,
The links in your post have been removed (by the moderators?) so I can't see the logos. That being said, unless the logos were created in Photoshop and you could open the original files in PS, I doubt you will be able to edit the text. You'll probably have to re-create them, either in Photoshop or (preferably) Illustrator.
- Bob

Similar Messages

  • Is it possible to edit text in a pdf form created using an earlier version of LiveCycle?

    I created a form starting with a Microsoft Word document, turned it into a Adobe Acrobat PDF and then turned it into a fillinable form using the LiveCycle Designer that used to be imbedded in the Adobe Acrobat program a couple of years ago.  Now that they have upgraded my Adobe Acrobat to the version that doesn't have LiveCycle Designer included (but given me the now separate LiveCycle Designer program), I can't seem to edit or add text to an existing form.
    If I create (re-create) the form in the new Adobe Acrobat program, then I can go back and edit either the base document or directly in the form.
    But I can't do that on my old forms.  Is that true or am I missing something?
    Please help.

    I don't know if it is the best solution but you could filter the results to just that client's answers on the summary tab and then PDF that.

  • Editing text in a terminal window #2

    I recently posted asking if it was possible to print a line of text into BlueJ's terminal window and then to let the user edit it. I got a reply that it is not possible to edit text once it is printed. However, with BufferedReader you can input text and then edit it before entering. Is it at least possible to have BufferedReader input text to begin with and then let the user edit it?
    For example:
    You can type in "Good Bye" and then backspace "Bye" and add "Morning" and get Good Morning. Instead, can "Good Bye" be automatically written and then you could edit it?

    hi there!!
    in a fast and direct way i dont think you can...
    but you might try using the Robot to send keystrokes, but that would be too troublesome me thinks...

  • I often have to open files .cue with Text Edit. Right Click, Open with, Others, Text Edit. Is it possible to put Text Edit in the menu avoiding to use "others"?

    I often have to open files .cue with Text Edit. Right Click, Open with, Others, Text Edit. Is it possible to put Text Edit in the menu avoiding to use "others"?

    The easiest way is to keep Textedit in the Dock and drag the .cue file(s) to the Dock icon.
    You can also create an Automator Service:
    Open Automator
    Select: Service
    Select Service receives selected [files or folders] in [Finder]
    and:
    Then select one or more .cue file, right click (or Control-click) on the selection to display the contextual menu. Scroll to the bottom of the contextual menu and select Services -> (what you named the Service).

  • Is it possible to have editable text field in interactive report?

    Is it possible to have editable text field in interactive report?
    Thanks,
    Dip

    Hi,
    I followed your suggestion and defined an IR with apex_item.text columns and it works fine. Now however I face a new problem when I run the page and use the standard Search Bar:
    - Click on Actions/Filter
    - Select a column, for example the employee name.
    - Open the Expression field LOV: I correctly see the different names.
    - When I select one of the names, in the Expression field, instead of the name, I see:
    "<input type="text" name="f03" size="20" maxlength="2000" value="Eugene" />"
    Horrible!!!!!!
    Is there a way to see the name and not that expression? The same thing get downloaded, so it´s really annoying.
    Thank you very much in advance for your help!!!
    Regards
    Francesco

  • Is it possible in windows itunes to capture (copy) a playlist display as editable text?

    is it possible in windows itunes to capture (copy) a playlist display as editable text?

    Thanks for the reply, ed2345.
    I had found similar suggestions in the archived support files, but thought perhaps something had been added in the recent versions that would more directly address such an obvious need. I had used iTunes on the Apple Mac OSX platform, which provides a direct copy/paste to text file procedure (for the entire playlist display). It was a bit of a surprise to find that the Windows version did not.
    I have tried both of the suggested methods, and found the Excel routine to be the best for my needs. I have not found a way to control the massive amounts of information supplied by the Export method.
    Thanks again for the reply. It served to confirm my fears that there was no direct copy/paste routine.

  • Remotely editing text files in Windows WinRM/PSExec/Powershell/cmd

    Hi!
    How can I remotely edit a text file in Windows?
    I am running and administering a number of Windows 7 workstations and Windows Server 2012 machines. I would like to be able to remotely edit text files on any of these machines. I can connect to any of these machines via psexec or powershell remoting. I
    can also connect via rdp, but for the workstations I would rather not kick the user off unless I absolutely have to.
    For example, we manage state configuration using
    Salt. Local configuration files are stored in C:/salt/conf. I would like to be able to edit these config files on the fly.
    This question on Stack Overflow covers the same topic, but none of the answers are particularly satisfying. Some of the possible solutions
    are:
    Remote Desktop: as I say, I would rather not have to kick a user off their workstation
    Edit a file over a UNC path: this only works for files on a share, and setting up arbitrary shares for quick edits seems like a bad idea.
    Install some manner of ftp or ssh server on all the target computers. This would certainly work, but it is it necessary with WinRM already active? I feel like installing and configuring extra software across all the machines in my organisation would be
    a last resort.
    Edit with a command line editor (e.g. vim, emacs) over a remote powershell session. This doesn't work. I don't understand the technical details, but a powershell remote session isn't interactive in the same way that ssh connections are.
    Edit using powershell's -replace operator, out-file and add-content cmdlets. This works, but is hardly the same as a fully featured text editor.
    Retrieve content from the remote, edit locally, and post back to the remote. This works, and is arguably the best solution I've found. Code sample from SO:
    PS C:\Users\Meredith> Invoke-Command -Session $ps -ScriptBlock {get-content c:/inetpub/myapp/web.config} > web.config
    edit web config
    PS C:\Users\Meredith> get-content web.config | Invoke-Command -Session $ps -ScriptBlock {set-content c:/inetpub/myapp/web.config}
    The last two options are the workflow that I've been using for now. Regex replacement for very simple changes, and copying to local and editing there for more complicated ones. Neither is ideal, but they work. It just feels incredibly old fashioned.
    I'm considering writing a plugin to my editor of choice (vim) to perform the remote fetch and save, to make my workflow a little bit smoother. Before I try that, I just want to know if there's anything that I've missed, or misunderstood.
    Cheers

    What is the "redirector"?
    I posted the same question to Stack Overflow, and was told about administrative shares. I wasn't aware of this, and it's exactly what I wanted. I can open the filetree of a remote machine with the path \\machinename\c$\. Perfectly simple, now that I know
    the answer.

  • My MacBook Pro Retina's Bluetooth chipset unknown/odd login message on the login screen states Login Window Authentication Login window Name edit text has keyboard focus. In addition, the login screen is not remembering me

    I have been experiencing several issues with my MacBook Pro Retina mid 2012. My MBPR is scheduled to go into the depot. However, I am wondering if anyone may be able to shed light on a few issues as this is the third "official" time my MBPR is going back for service ("one depot" trip; "one authorized" dealer; several in-store visits).
    My Bluetooth is stating that the Bluetooth Chipset is Unknown (0). I also have had Bluetooth Preferences mysteriously change on me. In addition, while Bluetooth is off there are two serial modems turning on. I have turned them off, but they continue to pop up.
    In addition, when I log in, my MBPR is not remembering me and my login name is not appearing on the slate-gray screen. The name and password are blank and the following message appears in the lower left hand corner. "login window authentication login window Name edit text has keyboard focus."  As a side note, I am the only user. The login issue is a recent occurrence as we just totally wiped it again via a Command + R, and I don't believe I have an accessibility setting set to anything that would cause this, but wanted to check.
    Should I be concerned here? Has anyone else had issues like this? I don't want to worry if I don't have to. I have had so many issues over the course of nine months. 5-6 wipes. Airport card replaced and I am about to pull my hair out if my MBPR doesn't come back worldly like clock work this time. I just can't send my days trying to get a $2300 product to work for me any longer. No idea what is wrong with it, but it is driving me insane. Cross your fingers for me and any guidance you have or thoughts would be welcomed. Thank you. EMM

    A few more issues...
    In Console, the following is greyed out:
    User and Diagnostic reports
    Com.apple.launchd.peruser.0
    Com.apple.launchd.peruser.88
    Com.apple.launchd.peruser.89
    Com.apple.launchd.peruser.92
    Com.apple.launchd.peruser.97
    Com.apple.launchd.peruser.200
    Com.apple.launchd.peruser.201
    Com.apple.launchd.peruser.202
    Com.apple.launchd.peruser.212
    *[user logs are accessible]
    Krb5kdc
    Radius
    My guest files are locked, but again I am the administrator of MBPR.
    I am worried about a keystroke logged or at least, trying to rule it out.
    Also:
    Mdworker32(225) [and other mdworker numbers] are sandboxing; stating deny Mach-lookup
    Com.apple.Powermanagement.control, etc. long attachment with those files with version: ??? (???).
    Postinstall: removing applications/Microsoft Office 2011/Microsoft Outlook.app
    WARNINGS in Console include:
    [NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 19.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction] instead.
    There are a ton of other warnings. Before I go through this again, can someone tell me if this is normal (all of it -- above too); or if these are symptoms is a keystroke logger or hardware issues? 
    I ask because originally, when my computer went in for diagnostics (more than once), Apple stated the hardware was fine (other than Airport Card -- finally). However, if I've done 5-6 total wipes; created new users; do not have sharing set-up; have not played around in Terminal; and am up-to-date with versions -- and various issues KEEP COMING BACK -- I am left wondering if a keystroke logger would be possible here?!? I thought maybe a faulty logic board, but why would diagnostics be okay, then? Not trying to be hyperbole, just desperate.
    Please help me rule keystroke logger out or at least, tell me so I know, so I can take appropriate action. If you think it could be the logic board with symptoms above, that would be a great too.
    All I want to do is use the computer as intended, but I can't seem to get a real answer, so after nine months -- I am turning to the communities to see if anyone -- anyone at all -- can help. The last thing I can do is have the MBPR come back from the depot and the same thing occur. Any guidance or advice would be so gratefully appreciated.

  • Is it possible to change text colour in code view?

    Hi all,
    Not sure if this is possible as never seen it myself, but is it possible to change the text colour in the code of the html?
    A site I am building at the moment is for a school who want to be able to edit text / links occasionally, and as they will only be using something like notepad and have no html knowledge between them whatsoever, I thought if I could highlight bits in the code which are 'not to be played with' it would make everyone's job a lot simpler!
    Possible or not?

    cs6_noob wrote:
    Can the comments only go at the beginning of a line, or can they, for example go after say a <p> tag but before the page text? (If you get my meaning!)
    Eg <p><!--edit from here--!>welcome to our website<!--up to here--!></p>
    Yes, you can, but you need to make sure the HTML comment tags are correct. What you have done won't work, but this will:
    <p><!--edit from here-->welcome to our website<!--up to here--></p>
    Notice that the exclamation mark is only in the opening comment tag. Not in the closing one.
    Opening tag for comment:
    <!--
    Closing tag:
    -->

  • How can I edit text tabs in Photoshop...?

    how can I edit text tabs in Photoshop like in Illustrator that I can choose to view the tab rulers and edit the alignment on the tabs?
    is it possible? otherwise I can't understand why I can use the tabs at all...
    thanks!

    No, tab-formatted text is not editable in the manner you desire. As for your question - tab is just a character like any other. You are simply taking a given kind of implementation for granted, nothing more, but that must not necessarily be the case for all programs. An evil programmer just could assign the tab key to forward delete or any other fancy function just as he could make your space key draw funky symbols from a different Unicode range, if you get my meaning... so simply take it the way it is. If editable formatting is high on your wishlist:
    http://www.adobe.com/go/wish
    Mylenium

  • Is it possible to add text field in condition type in PO?

    Dear Guru,
    Please kindly advice. Is it possible to add text field in condition type?
    I mean I have seen condition type "FRB1" Freight value in the condition detail we can input vendor code.
    So I would like to know is it possible to add text field in condition detail and how to set it up.
    Thank you very much.

    We would like to maintain some text in condition because of we would like to get that text to PO print out and we don't want to do enhancement.
    Ex: Condition Type: ZZZZ  Insurance  
    PO Print out show
    Item No.          Desc                                                  Qty  Unit Price  Amount
    10                 Item description                                  10000   10         100000
    20                 Item description                                  10000   10         100000
    30                 Item description                                  10000   10         100000
                         Insurance <<Description about insurance>>                  9,999
    Edited by: Saiyaman on Oct 1, 2009 1:35 PM
    Edited by: Saiyaman on Oct 1, 2009 1:36 PM

  • I can't edit text in pages document

    I created a poster and now it won't let me edit text....help please?? ty

    Menu > View > Show Layout/Invisibles
    Now go command a (Select All)
    What do you see?
    Do you see any boxes around your objects with light crosses on the corners? They are locked.
    click on them > Menu > Arrange > Unlock
    The other possibility is you have moved the objects to the Section Master:
    Menu > Arrange > Section Master > Make Master Objects Selectable
    Or if you click on the text area and then see small white boxes on the corners and a group of objects moves together
    Menu > Arrange > Ungroup
    You have shown me only the poster, out of context and without any of the surrounding format options, so it is hard to tell anything about it. Even whether you are in Pages. It could even be a pdf file.
    Peter

  • How To Edit Text?

    I just upgraded to EportPDF.
    With your subscription you can:
    Enjoy unlimited online conversions from PDF to Word (DOCX).
    Make scanned text editable.
    Maintain page, paragraph, and font attributes.
    Preserve tables, images, and multi-column text.
    Export PDF comments to Word.
    However, I cannot seem to edit text within the PDF.  If I try to export to Word, the resulting doc looks completely different, not to mention its missing the graphics.
    All I wish to do is change some basic text in the PDF... just change a "9" to an "8".
    Please advise.

    Hi,
    You can not edit the content within Pdf file by using Export Pdf But with the Acrobat.
    Would it be possible for you to send me your document?
    Regards,
    Florence

  • How to edit text in MS Word HEADER using bookmarks?

    I've been using the ActiveX calls to edit text in Word docs for a while. I assumed there was no trick to doing it in the header of a Word doc, but there seems to be no way to get into the header via LabView ActiveX calls.
    Regretably, Word also makes this tricky. I found these VBA hints:
    Bookmark, Go to Bookmark:
    (This method does not work with bookmarks in Headers/Footers)
    Selection.GoTo What:=wdGoToBookmark, Name:="Name"
    Bookmark, Select a Bookmark:
    (This method works when using bookmarks in Headers/Footers)
    ActiveDocument.Bookmarks("BookmarkName").Select
    Bookmark, Insert Text Using Range (Change Content of Range):
    (This method works when using bookmarks in Headers/Footers)
    ActiveDocument.Bookmarks("BookmarkName").Range.Text="Text"
    Bookmark, Insert Text Using Range (Add After Range):
    (This method works when using bookmarks in Headers/Footers)
    ActiveDocument.Bookmarks("BookmarkName").Range.InsertAfter _
       "Text"
    I have been using the first one and I was hoping one of the last three would be simple to implement, but there does not seem to be a way to do any of them via LabView.
     I do not have the reports tool kit, but I have seen nothing to indicate that it is possble with that either.
    So, is it possible to edit the headed of a MS Word doc?

    I'm also not happy about word and LabVIEW and I hope that there will be much more improvement with the open document format... right know I have to use a word document template .
    However, here is a code I use to fill bookmarks even in the header. I found that somehow the bookmark vanish after manipulation and you have to add it again.
    Hope that it help ....
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
    Attachments:
    MSWord_write_recreate_Bookmark.vi ‏20 KB

  • Edit text in Acrobat 9 issue

    HI,
    I'm trying to edit text in a pdf. When I'm selecting the text with the touch up text tool it is huge! It selects a paragraph insted of one line. How can I change it to select one line of text?
    Thank you.

    Normally you would just place the cursor in the text field and drag it for the text you want. Besides that, editing in Acrobat can be a real pain and is not recommended. If at all possible, you should go back to the original document and just create a new PDF.

Maybe you are looking for