Is it possible to edit the table that contains sites with the passwords?

for certain sites Firefox does not ask to remember the password, therefore this site will not appear in the security-table. By editing the table this problem could be bypassed.

*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Similar Messages

I forgot my iCloud password also the questions that were associated with the account please is there anyway to resolve this

i forgot my iCloud password and the questions that were associated with the account is there any way to resolve this

No one here can help you.
Contact Apple.

When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.

What are the tables that Contains DTP Filter Entries

Hello,
for the filter entries on a DTP Process I found the table RSBKSELECT "Selections for DTP Request (Summary)". But that holds only value which are done generic by Formula etc. but not the information which are entered manual.
Does anybody knows the table for the rest of entries ??
I need this Information to Report these Filter as Selectioncriteria.
Thank for any help
Henning

Hi,
Please note that I was able to link the tables by this kind of code:
"Get the request from the cube, to identify them.
    CALL FUNCTION 'RSSM_ICUBE_REQUESTS_GET'
      EXPORTING
        i_infocube     = LV_IC
      IMPORTING
        e_t_request    = LT_REQUEST
      EXCEPTIONS
        wrong_infocube = 1
        internal_error = 2
        others         = 3.
"Check each request
    LOOP AT LT_REQUEST INTO LS_REQUEST.
      "Populate LV_REQUID_CHAR to be able to read the table RSBKSELECT
      "The key is : Request id, without leading 0, right justified, and shifted one time to the left.
      LV_REQUID_CHAR = LS_REQUEST-PARTNR.
      SHIFT LV_REQUID_CHAR LEFT DELETING LEADING '0'.
      SHIFT LV_REQUID_CHAR RIGHT DELETING TRAILING SPACE.
      SHIFT LV_REQUID_CHAR LEFT.
      "Get the filters
      SELECT *
        INTO TABLE LT_RSBKSELECT
        FROM RSBKSELECT
        WHERE REQUID = LV_REQUID_CHAR.
ENDLOOP.
The internal table LT_RSBKSELECT will now contains all the filters used by the DTP.
It is way better than using the field that contains the concatenation of all filters since it is limited to 255 characters.
Hope it helps.

I don't see the table I had create with the command line

hi ,
I just install sql developer, and connect to mydatabase, but I see a lot of tables who are not mine, but I don't see the one I have created. so could you tell me haow t make my tables to appear. or if I have to recreate them with wich command in sql developer? thanks

Stranger.
You do not need to recreate tables in the SQL Developer.
The tables that you created and that they are in the database must be visualized, in accordance with the permissions.
You are connected to the SQL Developer with the same user that created the table (owner)?
The table that you desire to see appears below in the result of the command?
select * from user_tables;

HT201272 I changed my apple ID and password because my credit card was hacked. Now the apps that I purchased with the old ID cannot be updated, nor can I sync them to my new iPhone. Is there a way I can retrieve apps that I purchased?

I have a different apple ID and password and now I am unable to sync my apps to my new iPhone. How can I retrieve some of the apps that I purchased using the old ID?

Go to Settings>Store (or iTunes and Appl Store) and sign out and sign back in. If problem go to Settings>iCloud and make sure you are signed into the new iCloud account. You may have to create a new iCloud account.

Empty columns in the table that is populated with a dimension operator

Hello,
i use a dimension operator to populate a dimension. This dimension has a hierarchie with 3 levels. The mapping works but the columns that are located in higher levels aren't populated if the deepest level of the dimension is filled.
The columns in the higher levels are only populated for aggregated rows.
if you imagine the listed table, it looks like this:
dimension_key col1_level1 col2_level1 col1_level2 col2_level2 col1_level3
-1 xxxxxxxxx xxxxxxxxx
-2 xxxxxxxxx xxxxxxxxy
-3 xxxxxxxxx xxxxxxxxx aaaaaaaa bbbbbbbbb
-4 xxxxxxxxx xxxxxxxxy bbbbbbbb aaaaaaaaa
5 _________________________________________________ ccccccca
6 _________________________________________________ cccccccb
7 _________________________________________________ cccccccc
8 _________________________________________________ cccccccd
9 _________________________________________________ ccccccce
10_________________________________________________ cccccccf
Why are the columns of the higher levels in row 5 to 10 are not populated?
Regards Alexander

Hi:
When you copy a organizational unit or a position an then is moved to another hierarchy, in the table HRP1001 is kept that data as the original unit or position from was copied.
We solve the problem delete all these records and in the future no create with copy of others.
Susana

HT4484 My email was phished, so I deleted it and changed it completely. Now all the apps that I downloaded with the old email cannot update because I cannot log into that email. Mountain Lion is compatible with the new updated iPhoto. what can I do?

My email address was phished and I had to delete it completely. That was the one I used to download all my original apps on my computer. I have since changed to a new address, but since my apps were under the old one, I cannot update them without logging into the old address. It no longer exists....so how do I fix this?
Some of the apps I don't really care about updating but, I did download the new Mountain Lion and it wants to update my iphots and I can't do it.
Any help will be appreciated! Thanks!

Hi joaroa,
When you say you deleted your email and changed it completely, those are actually two different things, and it sounds like you are talking about your Apple ID, not just your email, (because you speak of making purchases with it).
If you changed your Apple ID (preferred, How to change the name you use for your Apple ID), then you would not have another Apple ID and all of your purchases would still be with your only Apple ID, it would just be renamed to your new email address.
If you instead created a new Apple ID (with a different email address) then of course you have two different Apple IDs and the old one still exists and is probably active. Just because you may not use an email address anymore, that doesn't mean an Apple ID of the same name is inactive, Apple IDs aren't deleted. If you start purchasing Apps with your new Apple ID, it can really cause confusion because, as you see, you need to be logged into the Apple ID that purchased an App to update it. It would be best to stick with one Apple ID for purchases, probably the one you have spent the most money with. Remember, unless it's an @mac or @me Apple ID you can rename them rather than creating yet another Apple ID. Since Apple IDs can't be merged or deleted, creating more can be a messy.
If you don't remember what the password is for a particular Apple ID, you can visit iforgot.apple.com where you can reset it, the AppleConnect password. If the Apple ID is no longer a valid email address, you can use the security question method to reset the password instead.
Unless you have made a lot of purchases with your new Apple ID, I'd recommend moving back into your old one, especially if that has the most or the most expensive apps with it. If your new Apple ID is the "name/email" you want to use, you could rename the new one to a secondary email, then rename your old Apple ID to your preferred name/email. Basically, rename the new one to something else which frees up that name (email) to rename your old Apple ID. Thus your old Apple ID has the new name. See My Apple ID. The "Manage your account" link is where you can rename the ID itself.
Sorry about getting long winded here, but it's important to keep as few Apple IDs as possible, at least when it comes to purchases. If an Apple ID is undesired, rename it rather than creating a new one. It will be much simpler in the long run.
Let us know how it goes.
ivan

What are the tables that contain Assessment cycles

Hi,
I need to load the Assessment cycles from R3 into BW. Can anyone guide me by suggesting table names which hold the Assessment cycles on the R3 side.
Regards,
Anand

Hi Anand,
Please check tables T811K , T811C, T811D.
Please assign points if it useful.
Regards
Ravinagh Boni

Where can I buy the earphones that are included with the Playstation 4?

Your response if greatly appreciated.

Hello Donbratee,
Greetings and thank you for your message. Our colleagues at PlayStation are actually better equipped to respond to your PlayStation questions. Please feel free to contact them by clicking here.
If my post answers your question, please mark it as "Accept as Solution."

Re : The Tables that are linked in SAP R3 Datasource

Can any one mention what are the tables that are link to the sap data sources
For Eg : 2LIS_11_VAHDR for the given data source what are the tables that are linked , where exactly the theses tables are stored in the database

Hi,
You can get this information from SAP documentation.Please check the below link.
http://help.sap.com/search/highlightContent.jsp
Regards,
Raju

Intenal table as container variable in the alert category

Hi
Is it possible to create internal table as Container Variable in the alert category. If it is possible how can we pass the data to this internal table in the Run time to the funtion module SALRT_CREATE_API.I have tried this to pass the data to the container parameter
it_container ,but i was unable to achive it .If anyone has come across this please guide me .
Thanks and Regards,
Venkat

You can use the Forms "From Clause Query" as the datasource for the data block. Then you can change the QUERY_DATA_SOURCE_NAME using set_block_property, so you can use any SQL statement you like. Of course you must name/alias the columns in a consistent manner so that the number of database items on the block matches those being queried.

I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation

We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox. When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date. The
version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?

Note that I have not tested either of these and they will not be supported by Microsoft.
1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
(you'll have to re-distribute the client package after this).
OR
2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
</Item>
<Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
  <Applicability Platform="ALL" OS="ALL">
   <Skip>Embedded</Skip>
  </Applicability>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

HT1420 how can i download an app on a new phone that was downloaded with the same apple id?

I mistakenly tried to use the same apple id to set up two phones and two iclouds. After realiing this would not work-I created a new apple id for mine, but it is not allowing me to download the same apps I purchased previously with the other phone. any suggestions?

You can use the same account on multiple devices, both for use with the stores and for Settings > iCloud - what happened when you tried to use the same account on the second phone ? You should have been able to activate the phone with it and log into iCloud with it.
If you want to download on the phone the apps that you bought with the other id then you will need to log into that other account on the phone : tap on the id at the bottom of the Featured tab and log out of it and then log in with the other account. But if you use iTunes Match, automatic downloads or redownload an account's past purchases then you might tie the phone to that account for 90 days : http://support.apple.com/kb/HT4627 (so you won't be able to do any of those three things on a different account until the 90 days have completed).

ITunes on Windows only has the music that I purchased after the move

Hi all,
I have a Mac Book Pro and I also have a Windows 7 laptop. The Windows 7 laptop already has the latest version of iTunes installed but the library is empty. I followed http://support.apple.com/kb/ht4527 to copy my files from my mac to a flash drive. I then copied my files to my Windows laptop. Now, all my files are in the Windows laptop. I held down the shift key while opening iTunes on the Windows laptop and select the iTunes Library.itl file (after renaming it from ._iTunes Library.itl) from copied over from the mac.
However, in iTunes on Windows, it is only listing the music that I purchased with the mac but not the music that I manually added to the mac. I double checked and all the music files (both purchased and manually added) are on the Windows laptop. Other than manually adding those files on Windows, are there some other library files that I need to copy over from my mac to my windows laptop?
Thanks in advance,
Monte

,,,after renaming it from ._iTunes Library.itl from copied over from the mac.
Where did you get that from? The libray on the Mac should have been called iTunes Library, with or without a .itl extension, but no leading ._
I suspect you need to go back to the Mac and copy the correct file.
tt2

Is it possible to edit the table that contains sites with the passwords?

Similar Messages

Maybe you are looking for