Is it possible to edit .tod files and mini dv files

Is it possible to edit both .tod files (jvc everio gz hd 7) and files captured from mini dv tapes on same timeline, either in imovie 6 or imovie 8?

However, the problem now is: the JVC footage is wide screen 16:9 (so black stripes top and bottom of screen), and the mini dv is 4:3. How do I get a movie out using either widescreen of 4:3?
You will have to make two decisions. This first is which aspect ratio to use: 16:9, 4:3, or 3:2. The second is whether to use a "Fit" within or "Crop" strategy for mixing the two. The "Fit" option will letterbox or pillar the clip(s) which do not match the aspect ratio. The "Crop" option will fill the screen and crop off the overages. You can however, set the viewing area of the cropped clip(s) using the "Crop" preview window. If the center of attention remains fairly constant throughout the clip, this latter option may work for you. If not, then you may have to "fit" the clip if you don't want to miss anything.

Similar Messages

Is it possible to edit a file made with 8.1 for word using acrobat 9 pro??

I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
When i select the tools menu, no options become available and there is no secuirty enabled on the file.
Thanks
Tony

bluuskii wrote:
I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
When i select the tools menu, no options become available and there is no secuirty enabled on the file.
Thanks
Tony
If you have Acrobat Pro Extended that is a PC Product. You've clicked on wrong Forum. Go back to main page the click on Acrobat and choose PC forum. Extend has such features as XML based PDF Forms which Acrobat Pro Mac can't handle.

Is it possible to edit proxy-files from XDCAM?

Hi,
i work with xdcam material in PPro CS5. Works great!
But somethimes we are in hurry and it would be nice to first
import and edit the proxy-files.
And after the edit is finished and in the meantime the full-resolution clips are copied to HDD,
it would be nice to just replace the proxy files with the full resolution clips.
It would be a benefit of time.
But when i want to import proxy files to PPro it announce "files not supported"
I thought proxy files are mp4 and PPro CS5 could import mp4...am i wrong?
Is there a work-arround to import proxy-files (perhaps rename files-extension!)
(Reencode to an other codec is no solution...takes to much time...)
Thanks from Cologne for any suggestion
Claus-Peter Wolf

Premiere can with with AVCHD and AVC-I media. Other types of MP4 media may or may not work.
Looks like you found a "may not".

I don't think it's possible to edit a slideshow and the accompanying thumbnails and caption/labels through in browser editing. Does anyone else want that?

Does anyone aside from me see this as a valuable new feature? Not sure it's possible...

You can edit slideshow hero images with thumbnails and captions through In browser editing. Are you facing any issue while editing those ?
Please provide details and screenshot which will help us to identify the issue.
Thanks,
Sanjit

Is it possible to edit a DVD, and if so, how do I go about it?

I have had an old video copied onto a DVD, but unfortunately a lot of the video is unviewable. I want to edit the unviewable sections out and keep only the good bits, but I don't know how to access the files on the DVD. Is there a way?
iMac Mac OS X (10.4.7) Also have an iBook G4 (10.3.9 ) LaCie DVD+RW 16x4X16 burner

videoDVD is a delivery format, normally end of the of the road...
but, you can convert dvds into something editable, you need 3rd party tools, your options are, in recommended order:
* DVDxDV (free trial, 25$, Pro: 90$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/insert dvd, hit apple-k
* connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter

Using Muse to edit Dreamweaver files??

I just started using Muse and must say it is awesome. However, I am wondering if I can take websites that were created with Dreamweaver and edit them with Muse?
Thanks,

Hello,
It is not possible to edit html files in Muse at the moment. Muse can read only .muse files.
Regards
Vivek

How to edit raw files' metadata directly?

Is it possible to edit raw files' metadata directly? If so, how? (I am using Bridge CS6 v5.0.2.4 x64). In my case, raw files are from Nikon digital cameras, i.e., .NEF.
By directly, I mean the original file is changed, rather than the sidecar .xmp file.
This is necessary under some circumstances where it may be required to prove ownership or origin of a photo.
Help most appreciated.
Thank you.

So how do you prove an image is yours?
I did understand the ownerships problem but I also would point to the impossibility of hard proof with current technology.
As said, I put my energy in good clients and for my images that are used on personal websites without my permission I really don't bother.
Don't know where you live and what your country has in its law regarding copyright. I also don't know to what extend you want to go and how much money is involved with your problem.
Never had to do it myself but I heard of several cases in the Netherlands. If you are certain it is your image and it is used without your permission and without paying you there are normal ways to seek justice.
First call the person or company that betrayed you for info and explain, then put this in writing with the request of a reasonable fee. If no luck seek a lawyer for a first letter with warning for extra costs and fine.
If you want (depending on the law in your country but most western countries do respect copyright) you can get it to court. Be sure to have the original raw files at hand (the whole series makes it more believable) and eventually if needed or possible seek witnesses seeing you taking the pictures.
But it can be a long and hard road that is certainly not suitable for a small case. Then again, most of the cases have been decided in favor of the photographer, the company that first refused to pay left with the usual fee to pay including a fine (mostly the same or more as the fee) and having to pay for the costs of the court…
Also keep in mind this is not good advertisement for you as a photographer, especially if the fine is big the word will spread around in the business. It is always problematic in this cases, hence my advise to invest in good clients...

How to edit Excel files online

HI, is it possible to edit Excel files online, which where uploaded to webserver. I mean, opening an ecxel sheet changing different fields, and saving the changes without opening the .xls with my local office?
If yes, how?

you could try it with http://jakarta.apache.org/poi
That is a package that allows reading and writing of excel files, it wont be easy as you have to parse the excell file into HTMl that is editable.

Edit configuration file saved in router/switch flash? (IOS)

Hi guys,
I hope it is possible to edit configuration file if we have it in our switch/router flash memory?
Something like "nano" or "vim" on unix? Maybe you know any hidden commands to do this?

Cisco routers and switches store (at least) both the startup and running configurations in memory. You edit the running configuration using Cisco's built-in command line interface when you change from EXEC (enable) mode to config mode. There is no built-in Unix type editor. The commands available in config mode vary according to the platform and OS image you have loaded. There are literally thousands of pages of command references out there explaining them all.
When you complete your configuration tasks and drop back into EXEC level, you normally synchronize the running and startup configurations ("copy runnning-config startup-config" or simply "copy r s"),

Final Cut x 4 conversion or plug-in for TOD files

Are there any plug-ins for FCX4 that would allow me to edit TOD files? FCX4 doesn't recognize them. I know I can convert the TOD files to MOV files using MPEG Streamclip. That wouldn't be so bad except that my friend has handed me 35 hours of raw footage in TOD.

Thanks, Martin.
I found the batch conversion feature. Now I've noticed that when conveting a TOD file to a MOV file, the MOV file size is about 4x larger.
The TOD file info is this:
Stream: MOV0A3.TOD
Path: /Volumes/042811/SD_VIDEO/PRG006/MOV0A3.TOD
Type: MPEG transport stream
Duration: 0:05:41
Data Size: 720.99 MB
Bit Rate: 17.69 Mbps
Video Tracks:
4113 MPEG-2, 1440 × 1080, 16:9, 29.97 fps, 20.00 Mbps, upper field first
Audio Tracks:
4129 MP2 stereo, 48 kHz, 384 kbps
Stream Files:
MOV0A3.TOD (720.99 MB)
When I convert to a MOV file I'm using these settings:
Any advice on these settings to keep the MOV file the same size as the TOD file?

Is it possible to edit some text in JPEG Files and convert it into Doc?

How can I edit my files in Doc. Format.
I Have Some JPEG Files but I want to edit some text on it. So I convert it in Doc. Format.

Not possible with Adobe Acrobat. Why did you this question in the forum for Adobe Acrobat?

In Pages I used to be able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file".

In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And I can no longer open the actual template, when template is clicked, it automaticaly opens an "untitled" version???

In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

Is it possible to edit/change audio files in a published html5 file?

Is it possible to edit/change audio files in a published html5 file?

Theoretically, YES, but they would need to be in exactly the same format and have the same filename. Why would you be wanting to do this? If the new files are not the same playing length, this could potentially throw out any synchronisation with other elements in the presentation.

Is it possible to edit .tod files and mini dv files

Similar Messages

Maybe you are looking for