Is it possible to either get a CD version of Mountain Lion or create your own?
I am having a seriously hard time partioning a drive and creating a copy of my OS X Mountain Lion system. I have partioned my drive and tried making a copy using Disk Utility and it tells me that what I am trying to do can not be done. So moving to other options.
Is it possible to either request a CD ROM version of Mountain Lion from Apple or even better, is there a way I can make a CD ROM version of Mountain Lion myself, so that if I dont like Maverick I can just re-install Mountain Lion.
Any help would be great.
Another option is to make a bootable clone and put is on a USB stick.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Similar Messages
-
I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee. -
I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do? I am very frustrated and just want the great software to download in a resonalbe time!
Take your Mac to a location with a fast, relaible Internet connection that will be all yours during the duration of the download.
If you want to complain, PLEASE call Apple and do so.
Internet only downloads of OS X is completely stupid, it assumes everyone has reliable Internet everywhere and /or no data caps. -
How do I get a copy of the Mountain Lion OS that I can use to recover?
How do I make a disc image of my Mac Mini HD that id bootable and has the operating system with all the programs, settings and data. If I need to replace a defective hard drive it would be good to have an image on a USB flash drive to restore previous settings and the operating system -- Mountain Lion, 10.8.1. I have been told that TimeMachine does not make a true disc image. I want a "hard copy" of the operating system that does not require an internet connection.
Unfortunately, the link for getting specific hardware versions has disappeared. So basically:
Get yourself a spare hard drive freshly erased or with a freshly erased partition of around 8 GBs or more.
Boot to your Recovery HD. Select Reinstall Lion from the main menu.
From the beginning screen select your spare partition/drive as the target destination then begin the download.
At the end of the download you will observe an Install button for you to click. Now this is important - as soon as that gadget appears you must abort the installation process. There are only two reliable ways to do this quickly: a. yank the cable for the drive from the computer; b. pull the power on the computer - shut it down quickly.
This will result in your finding a folder on the drive that contains InstallESD.dmg that you can now use to create a bootable USB flash drive installer based on the special build for your model. Use it until the next public release of Lion appears or you move on to Mountain Lion.
If you do not stop the download process immediately upon its completion you will end up with an installer that always boots to a non-functioning installation progress window instead of the normal main menu.
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process. -
When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates < -
I just bought a new iMac and I am new to the Desktop Mac. I read you can get a free upgrade to Mountain Lion if you bought your computer after June 11, 2012. Do I have to do something before Mountain Lion is released? If so What? Thanks
Just check in with this link when ML is released for instructions on how to claim your upgrade.
http://www.apple.com/osx/uptodate/ -
HT4007 Downgraded OS from Mavericks to Mountain Lion, how to get Aperture to work on Mountain Lion?
Downgraded OS from Mavericks to Mountain Lion, how to get Aperture to work on Mountain Lion? My iMac (Intel) is older and Apple told me this model doesn't handle Mavericks well, recommended I step back to Mountain Lion, which was where Aperture was originally used. Aperture was upgraded when I installed Mavericks, need to go back to older version. How?
Erase disk drive
Restore backup made prior to upgrade
Allan -
Do I get a free upgrade to Mountain lion on my MacBookPro if I just purchased a new Mac Book Air with Mountain Lion installed?
Sorry, no.
-
Can No Longer Get Camera Photos After Installing Mountain Lion
After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port. This camera has worked for years with my iMac, but not anymore. Anybody else having this issue after installing the newest system?
DickPaul_31:
I have not tried to import the photos directly into iPhoto. However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either. I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok. My iMac has been working strangely since I installed Mountain Lion. I'm getting lockups using iMovie too.
Dick -
i bought my MacBook Pro off a friend of mine last year, she did not restore it before selling it to me & I do not have the disk to restore it that way so I followed online directions to restore with the he power button option button method. It worked up until where it asks me to reinstall Mountain Lion OS, I select accept and agree to the terms and conditions which then asks for my Apple ID,once I enter the log in it it tells me that I am unable to download the software because it is unavailable and to try again later so my laptop is essentially useless right now and won't let me reinstall the hardware needed. Is there a way to fix this or do I need to take it into a store for a genius bar appointment. I am really trying to avoid that.
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
How do i upgrade my hard drive and get it to boot in Mountain Lion?
I have a Late 2009 Macbook 6,1 and want to install a new, larger capacity hard drive. Currently I am running Mountain Lion and don't have any install disks, so the question is, what is the process to change out the drive and get the Mac to boot after the new drive is installed. Since it is a new drive it won't have a recovery partition or any operating system files. My plan is to migrate my data using my Time Machine backup, but I worry that when I try to boot after the new drive is installed, all I will be greeted with will be a flashing question mark. I'm really having a hard time finding a step-by-step set of instructions for someone attempting what I'm trying to do. I do have an external enclosure I could put the new drive into before I put it into the Mac. Would I try using something like Migration Assistant to transfer all of the files to the new drive and then just swap out drives afterward? Would the OS migrate as well, or would I still not have a bootable drive? Or is there some kind of minimal boot disk I could burn onto a CD or flash drive and then once the machine boots go with a restore from Time Machine Backup? I'm open to any ideas anyone may have on the least painful way to go about this process. Maybe use some (hopefully free) software of some sort to clone the current drive onto the new drive while it's still in the external enclosure? Any help or ideas would be greatly appreciated!
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
How do I get microsoft office restored on mountain lion?
I have just upgraded with CD to Snow Leopard and then to Mountain Lion. But Microsoft Office is no longer supported. Can I download Office to get to my work?
You need to upgrade it to Office 2008 or 2011, or use a product such as OpenOffice or iWork.
(76277) -
I am purchasing a new imac with OS X Mountain Lion installed. When I transfer all my files, software, etc... from my present imac which has OS X Lion via Time Machine does Lion automatically get replaced by Mountain Lion?
Thank you very much CT
-
Is it possible to run all OS and programs on Mountain Lion?
Greetings!
I have set myself the following challenge and wondered if it was technically possible to do the following:-
On a single mid-2012 MacBook Pro (with optical drive built in) running OS 10.8.5 as the main OS and obviously totally within the law of my country I would like the ability to run:
§ Power PC applications;
§ All Mountain Lion programs;
§ Any Linux program;
§ Windows 7 or later;
Note 1: I have already purchased Mac OS Snow Leopard Server and await it's delivery…
Note 2: I am happy to buy an OEM copy of Microsoft Windows…
Note 3: Microsoft Windows is sadly a necessity due to my University not supporting anything else for it's specialist software which I require for my studies.
Note 4: I would use Ubuntu Linux
Note 5: I have absolutely no desire to ever run Mavericks at all…
Thus, I would like my MacBook Pro to simply run any program I care to use, is this realistically possible?
Please accept my apologies if this is posted in the wrong section, I was a little unsure in which community to post this.
Thank you in advance,
CKThank you,
I shall do just that, as soon as I've purchased an OEM of Microsoft Windows…
Is there anything I should be aware of, other than to keep a back up of everything before I start, please? -
Is everybody getting problem with OS X Mountain Lion in this world or few people
Apple should fix immediately this new version or Genuis come ahead. I am checking every big informaton website but no one highlighted these issues.
Hello BinodDhami,
I agree with Grant Bennet-Alder, what you see here "are only a handful" of users who are having problems big or small with Mountain Lion.
I for one have a smooth upgrade for both my iMac and MacBook air, and I think whoever were running Lion should have a smoother upgrade becasue Lion and Mountain Lion are very similar and they probably share a lot of the same codes, as compared to older OS.
It may be too late to say here, but whenever you perform a major OS upgrade, and like all mac websites have recommended, you always
1. Perform all the OS and software updates
2. Back up
You would also find out, especially if yours is a daily working computer, that your major running software is compatible with the new OS.
Like for me, I run Adobe Creative Suite, and have major apps like Norton Internet Security, Maintain Cocktail, SuperDuper, CandyBar, DockStar and Attachment Tamer running, so I make sure they are all compatible with Mountain Lion before I hit install.
As for your problem, maybe you can start a new discussion and detail as much as possible, your mac's problems, what 3rd party apps etc you have that you think might affect it, and screen shots - It's a wonderful thing now that this forum allows us to post screen shots!
Cheers
Maybe you are looking for
-
How do I find a file in Time Machine?
I get time machine. It just works. But my questions is, how do I locate a file that I know was backed up but I have no idea when the last time it was actually present on my system? Is there a way to just search like in Spotlight but have it show file
-
HT1444 need to install snow Leopard OS X 10.6 on my laptop
need to install snow leopard os x 10.6 on my laptop
-
Posting date and billing date changes on release to accounting
Hello, I wants to change invoive billing date (VBRK-FKDAT) automatically with current system date (SY-UDATE) when release to accounting invoice. Because always, our posting date (BKPF-BUDAT) on accounting document) must equal to current system date (
-
Hello All, We are using SAP Business one. After entering the User Id and password, companies are not showing in database for one user. Attached the file FYI. Please Help.
-
Hi all, I am working on WM/PP matl staging scenario. while picking matl. from warehouse i am geting following error message " open qty reduced by available stock" if i press enter and switching over to TO creatiion and asking for destination storage