Is it possible to eliminate Outlook 2008 when using Outlook 2011?

Sure!
I personally like AppCleaner (free), a product you could use to remove Office 2008 (I think you meant Office, not Outlook).
AppCleaner would remove the executables and a lot of the extra stuff associated with the software.

Similar Messages

HT4437 Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled.

Bug report & possible patch: Wrong memory allocation when using BerkeleyDB in concurrent processes

When using the BerkeleyDB shared environment in parallel processes, the processes get "out of memory" error, even when there is plenty of free memory available. This results in possible database corruption.
Typical use case when this bug manifests is when BerkeleyDB is used by rpm, which is installing an rpm package into custom location, or calls another rpm instance during the installation process.
The bug seems to originate in the env/env_region.c file: (version of the file from BDB 4.7.25, although the culprit code is the same in newer versions too):
330     /*
331      * Allocate room for REGION structures plus overhead.
332      *
333      * XXX
334      * Overhead is so high because encryption passwds, replication vote
335      * arrays and the thread control block table are all stored in the
336      * base environment region. This is a bug, at the least replication
337      * should have its own region.
338      *
339      * Allocate space for thread info blocks. Max is only advisory,
340      * so we allocate 25% more.
341      */
342     memset(&tregion, 0, sizeof(tregion));
343     nregions = __memp_max_regions(env) + 10;
344     size = nregions * sizeof(REGION);
345     size += dbenv->passwd_len;
346     size += (dbenv->thr_max + dbenv->thr_max / 4) *
347         __env_alloc_size(sizeof(DB_THREAD_INFO));
348     size += env->thr_nbucket * __env_alloc_size(sizeof(DB_HASHTAB));
349     size += 16 * 1024;
350     tregion.size = size;
Usage from the rpm's perspective:
The line 346 calculates how much memory we need for structures DB_THREAD_INFO. We allocate structure DB_THREAD_INFO for every process calling db4 library. We don't deallocate these structures but when number of processes is greater than dbenv->thr_max then we try to reuse some structure for process that is already dead (or doesn't use db4 no longer). But we have DB_THREAD_INFOs in hash buckets and we can reuse DB_THREAD_INFO only if it is in the same hash bucket as new DB_TREAD_INFO. So line 346 should contain:
346     size += env->thr_nbucket * (dbenv->thr_max + dbenv->thr_max / 4) *
347         __env_alloc_size(sizeof(DB_THREAD_INFO));
Why we don't encounter this problem earlier? There are some magic reserves as you can see on line 349 and some other additional space is created by alligning to blocks. But if we have two processes running at the same time and these processes end up in the same hash bucket and we repeat this proces many times to fill all hash buckets with two DB_THREAD_INFOs then we have 2 * env->thr_nbucket(37) = 74 DB_THREAD_INFOs, which is much more than dbenv->thr_max(8) + dbenv->thr_max(8) / 4 = 10 and plus allocation from dbc_put, we are out of memory.
And how we will create two processes that end up in the same hash bucket. We can start one process (rpm -i) and then in scriptlet we start many processes (rpm -q ...) in loop and one of them will be in the same hash bucket as the first process (rpm -i).
I would like to know your opinion on this issue, and if the proposed fix would be acceptable.
Thanks in advance for answers.

The attached patch for db-4.7 makes two changes:
it allows enough for each bucket to have the configured number of threads, and
it initializes env->thr_nbuckets, which previously had not been initialized.
Please let us know how it works for you.
Regards,
Charles

Possible to parallel disk channels when using BrBackup?

Hi,
we are testing disk backup for our SAP landscape.
In RMAN it is possible to configure channels, when performing a disk backup.
Is it possible to define channels also within BrBackup?
Thanks for your help.
Best regards
Carlos

Hello
You could just configure Br*Tools to use Rman, you could even configure Rman parameters (such as channels) in the BR*Tools configuration file.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a8910c3a-0d01-0010-a6a9-f4a8aae140fe?overridelayout=t…
https://help.sap.com/saphelp_nw04/helpdata/en/3f/9d800e1aec11d2b42c00609419997a/content.htm
PS: you should post Oracle related question in the area dedicated to Oracle SAP on Oracle
Regards

Is it possible to determine the sender when using a shared mailbox on Office365.

Answer would be greatly appreciated, thanks.

Hi Jamie,
It's not possible, unless you see the signiture in the email.

S it possible to download Streaming Content when using Flash Player?

Am wishig to download Streaming via Flash to my hard drive. Is th
s Possible ?

I would advise you to post your question in the appropriate Flash/Flash Player forum, which you may find here:
http://forums.adobe.com/community/flash
http://forums.adobe.com/community/webplayers/flash_player
This forum is for discussions on the forums themselves.

Dictation is no longer possible after updating to iOS8, when using Pages. I am able to dictate this question in Safari, but hey Pages will not let me dictate.

I updated to I OS 8, and after I did I discovered that capital Pages no longer accepted dictation. Instead when the keyboard was supposed to slide up and I pressed the mic button, everything disappeared below the line. There was no audio line, there was no keyboard, there was no DONE button. The only way that I could get out of the program was to hit the home button.

I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry

Possible to benefit from subscription when using s...

Hi. Can anyone tell me if I sign up for a worldwide subscription and am using skype to go numbers from my mobile phone, whether the subscription will be used or whether I'll still be charged by the minute?
Thanks.

Subscription applies to calls made through Skype To Go. For Skype To Go you need either Skype Credit or a subscription
http://www.skype.com/intl/en-us/features/allfeatures/skype-to-go-number/
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Is it possible to add tooltip when using REUSE_ALV_GRID_DISPLAY

All,
Is it possible to add tool-tip when using REUSE_ALV_GRID_DISPLAY. I am using
i_fieldcat_alv TYPE slis_t_fieldcat_alv.
slis_t_fieldcat_alv does not have a tool tip option.
Your earlier response is much appreciated.
Regards
Kasi

Looks like it is NOT possible to add our own text for tooltip when using REUSE_ALV_GRID_DISPLAY.
See attached thread
Re: quickinfo in ALV

How to suppress SCHEMA_OWNER when using DBMS_METADATA.GET_DDL

Hi,
I was wondering, is it possible to suppress the owner when using dbms_metadata.get_ddl?
SQL> select * from v$version where rownum = 1
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
SQL> exec dbms_metadata.set_transform_param (dbms_metadata.session_transform,'SEGMENT_ATTRIBUTES',false)
SQL> select dbms_metadata.get_ddl('TABLE','EMP') from dual
DBMS_METADATA.GET_DDL('TABLE','EMP')
CREATE TABLE "SCOTT"."EMP"
   (     "EMPNO" NUMBER(4,0) NOT NULL ENABLE,
     "ENAME" VARCHAR2(10),
     "JOB" VARCHAR2(9),
     "MGR" NUMBER(4,0),
     "HIREDATE" DATE,
     "SAL" NUMBER(7,2),
     "COMM" NUMBER(7,2),
     "DEPTNO" NUMBER(2,0)
   )I would like to get rid of the "SCOTT". Alternatively to change it into something else.
Is that possible, without post processing the output, that is?
Regards
Peter

Hi Karthick,
I was afraid that would be the answer. It can be done, but it seems rather convoluted:
SQL> create or replace function get_table_ddl(table_name    varchar2
                                        ,schema        varchar2 default user
                                        ,new_owner     varchar2 default null)
   return clob
is
   v_handle        number;
   v_transhandle   number;
   v_ddl           clob;
begin
   v_handle := dbms_metadata.open('TABLE');
   dbms_metadata.set_filter(v_handle, 'SCHEMA', schema);
   dbms_metadata.set_filter(v_handle, 'NAME', table_name);
   v_transhandle := dbms_metadata.add_transform(v_handle, 'MODIFY');
   dbms_metadata.set_remap_param(v_transhandle,'REMAP_SCHEMA',schema,new_owner);
   v_transhandle := dbms_metadata.add_transform(v_handle, 'DDL');
   dbms_metadata.set_transform_param(v_transhandle,'SEGMENT_ATTRIBUTES',false);
   v_ddl := dbms_metadata.fetch_clob(v_handle);
   dbms_metadata.close(v_handle);
   return v_ddl;
end;
Function created.
SQL> select get_table_ddl('EMP') from dual
GET_TABLE_DDL('EMP')
CREATE TABLE "EMP"
   (     "EMPNO" NUMBER(4,0) NOT NULL ENABLE,
     "ENAME" VARCHAR2(10),
     "JOB" VARCHAR2(9),
     "MGR" NUMBER(4,0),
     "HIREDATE" DATE,
     "SAL" NUMBER(7,2),
     "COMM" NUMBER(7,2),
     "DEPTNO" NUMBER(2,0)
1 row selected.Regards
Peter

Values of return code when using dba_audit_session

Is there anywhere I can look up the possible values for return code when using dba_audit_session?
I am generating a report over the data and have so far only been able to provide the returncode and whether the username exists (ie username or "other" error)
Thanks
(using 9i)

So far I have fathomed out:
Return code: 0 everything OK
Return code: 1017 wrong username or password
Return code: 28000 locked account
Return code: 28001 expired account

Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?

Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?
== This happened ==
Every time Firefox opened
== I've never been able to figure out how to do those things in Firefox.

When you use OWA in something other than IE, you're using OWA lite and no--it is not possible to do either in OWA lite (well, new Exchange stuff makes my answer a little less emphatic but still: pretty much no). Thanks Microsoft. But this guy made it possible to mark unread/read and select all/none:
http://david-burger.blogspot.com/2008/07/firefox-greasemonkey-outlook-web-access_19.html

I have recently bought a macbook and am using outlook 2011 as email. i am getting an error message 4.7.0 not allowed when sending emails how do I fix?

i have a macbook and am using outlook 2011 as email. receiving okay. sending okay sometimes. am now getting error message 4.7.0 not allowed when sending. what is the cause? how do I fix please?

I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to. so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again. i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.

Possible for Oracle to consider constraints when using bind variable?

Consider the following table with a check constraint listing the possible values of the column
create table TEST_TABLE(
my_column varchar2(10));
insert into TEST_TABLE select 'VALUE1' from dba_objects;
alter table TEST_TABLE
add constraint TEST_TABLE_CHK1
check (my_column in ('VALUE1', 'VALUE2'));
begin dbms_stats.gather_table_stats(ownname=>user,tabname=>'TEST_TABLE');END;Let's see the number of logical I/O's needed for the following SQL statements.
(The value was obtained by the delta ofselect m.value from v$mystat m, v$statname n
where name='session logical reads' and m.statistic#=n.statistic#)
If string lateral is used:
declare
   n number;
begin
select count(*) into n from test_table where my_column='VALUE1';
end;
Consistent Gets: 21
declare
   n number;
begin
select count(*) into n from test_table where my_column='VALUE2';
end;
Consistent Gets: 21
declare
   n number;
begin
select count(*) into n from test_table where my_column='VALUE3';
end;
Consistent Gets: 0Oracle can eliminate the table if it knows the queried value can't satisfy the constraint. Good.
(Actually, the execution plan for the last query included the 'FILTER' operation.)
However, if bind variable is used:
declare
   n number;
   x varchar2(10);
begin
x := 'VALUE1';
select count(*) into n from test_table where my_column=x;
end;
Consistent Gets: 21
declare
   n number;
   x varchar2(10);
begin
x := 'VALUE3';
select count(*) into n from test_table where my_column=x;
end;
Consistent Gets: 21Oracle can't eliminate the table using the constraint. I can understand that because bind variables are used, Oracle can't directly eliminate the table when generating the execution plan. However, is it possible to eliminate the table, or at least employ some shortcut in runtime? If not, will this be a performance loss compared with using values laterals when check constraint exists?
(And is it possible to use autotrace on PL/SQL block in sqlplus?)
Oracle:
     10.2.0.4 SE
     11.2.0.2 SE
OS:
     RHEL5

However, is it possible to eliminate the table, or at least employ some shortcut in runtime? I can't see how to do this. Oracle has a sqltext that has an embedded bind variable in it. And for this sqltext it has an execution plan in the shared pool that will be used irrespective of the actual bound values at runtime.
Maybe in 11G, with adaptive cursor sharing / plan bind awareness, Oracle might be smart enough to introduce a second execution plan for the VALUE3 case.
If not, will this be a performance loss compared with using values laterals when check constraint exists?Only if you submit the dumb query and search for records with VALUE3... Normally your application code would not hold/generate these queries.
Will it?
For columns whose values are bound by a CHECK constraint, one might even consider to never use bind variables, since very likely you will have few versions of queries that use these columns.
Not?
Edited by: Toon Koppelaars on Jun 22, 2011 1:20 PM

Messages won't import from Entourage 2008 to Outlook 2011

My hard drive crashed on my MacBook Pro that was running Entourage 2008 for Mac. I have a back up of the Microsoft User Data file, and I want to upload it to Outlook 2011 for Mac. When I import the data, it pulls my calendar and complete folder structure into outlook perfectly. However, there are no messages/emails in any of the folders. I've tried it a couple times and same thing always happens. Transfers everything but the messages. The database is 19GBs, so I know the messages are on there.

To exporting Entourage data into Outlook 2011, select "Items to an Entourage archive" option and that gets export everything; mail, folders I've created, contacts, and calendar.

Is it possible to eliminate Outlook 2008 when using Outlook 2011?

Similar Messages

Maybe you are looking for