Is it possible to email outside of organization?

Hi,
Is it possible to email crystal reports (in excel spreadsheets)
to email accounts outside of the organization. I have no problem scheduling reports to internal email addresses, but everytime I schedule a report to an outside email the report fails with an error of:
address error. CrystalEnterprise.Smtp: SMTP_E_MAILBOX_UNAVAILABLE_2(550)
We are using crystal server XI release 2.
Any suggestions or comments would be appreciated.
Regards
Kyle

Hi Kyle,
I would suggest testing on the Job Server machine by using telnet to see if you can email externally from the command prompt. Below is a link of how to use mailman:
http://www.yuki-onna.co.uk/email/smtp.html
Are you able to schedule the report externally without an attachment? I would also suggest speaking to your Exchange Server administrator. There may be logs or restrictions for outgoing emails set on the mail server.
Regards,
Wallie

Similar Messages

How to change DNS zone, or how to host email outside of BC

I have BC from Creative Cloud Suite, so I have the cheapest possible plan for BC. Meaning I don't get any email hosting. So I was looking to host email outside of BC. I looked it up on google to see if it could be done (I'm really new with all this hosting stuff!), and I found that if you change the DNS zone and MX records to certain things you could. I had to delete the MX record I had set up prior to finding out BC won't host my email, and I went to set up an Advance DNS Records.. But I'm not sure what to do! There's a lot of information I'm not sure about, and I don't know what goes where!
I'd like to have godaddy host my email, and what I found is that I need to change my DNS zone to: mailstore1.secureserver.net and change MX records to 0 smtp.secureserver.net 10 mailstore1.secureserver.net
I may end up finding somewhere else to host email at a later point, but right now I just want to try to figure out how to do this so I'll be able to in the future. Any and all help is appreciated! Thank you

Hi
All you need to do is go to Admin > Site Settings > Site Domains and activate your new domain. You’ll have to enter an MX record for e-mail to be setup, which will be provided by godaddy.
Here’s a similar article on the same topic:
http://forums.adobe.com/message/4997019#4997019
Let me know how it goes

Cisco Unity Connection not relaying voicemails outside the organization

Hi all, we are running Cisco Unity Connection version: 8.6.2ES25.21900-25. It has been set up to accept voicemails for Exchange 2010 users (in other words email messages with WAV attachments) and deliver these to their inboxes; this works with no problem.
I have two users who would like to receive these emails at their outside account, however the messages are never sent. I have tried the following:
Changed the users corporate email addresses from "[email protected]" to "[email protected]"
Unchecked the option to "Generate SMTP Proxy Address From Corporate Email Address."
On the "Message Actions" page for their account I have configured voicemail and email to "Relay the message" and entered their external SMTP addresses.
Confirmed the smart host setup is OK (points to our Exchange 2010 CAS which has firewall rules in place to permit it to send mail outside the organization.
Confirmed the Exchange 2010 CAS will accept SMTP messages from the subnet the Unity Connection server resides in.
If I switch the user SMTP settings BACK to their original internal SMTP addresses for my company the messages are then immediately delivered properly to these addresses. This signifies to me that Unity is periodically trying to send these items but they just aren't going out. No sign of the messages in any user report I ran in Unity nor message tracking in Exchange.
I also tried setting up an Outlook rule to forward these voicemail messages to the recipients external addresses but this did not work and after doing some research I see that the way in which Unity delivers the messages to these recipients internally (via EWS) is the reason why. I wonder if this is the same reason these are not going out to their external SMTP addresses.
Thanks for any assistance provided!

Look at the transfer options for that particular user and make sure it's set to ring the phone, that configuration is PER user.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Exchange 2010 does not send mail outside the organization

Hi,
I have an issue with my Exchange 2010 server and the issue is that I cannot send messages outside the organization. There are lot of posts regarding this issue, but in my case the issue is a little bit different and I didn't find an answer. There is properly
configured send connector, DNS records are OK, external domain is properly configured, all Exchange services are started. The server is running on VM with 4 virtual CPUs, 32GB of RAM. When I send a message to ouside domain the message is not delivered.
I have enabled protocol logging (SMTP logging) and there are no records in the log. What I found is that when I reboot the server, immediately after restart I am able to send an email to outside domain, few minutes later the messages, addressed to the
same outside domain are not being delivered.
The VM is created on LUN, presented from storage Fujitsu Eternus DX90S2, communication between the storage and the host is through iSCSI, all the disks on the storage are 2TB, SATA, 7200rpm.
I can't explain to myself what is going on.

No, unfortunately I do not receive NDR, the queue is empty as well. However, I am receiving a message from Exchange and it states that the message, sent to external domain is not yet delivered and the server will continue to try to deliver it, there is no
reason specified for delaying. The message is:
Generating Server: exchange.domain.local
My_Email_Is_Here
#550 4.4.7 QUEUE.Expired; message expired ##

OS X Server (10.6 Snow Leopard) -Possible to email updates to blog or wiki?

Wondering if it's possible to email-to-blog or email-to-wiki on OS X Server (Snow)?

The mail to wiki works by simply checking the 'Mailing List' option within the Wiki setting. This will create a mailing list for the wiki ( Refer /etc/aliases ) This mailing list can be emailed to, from outside and will appear as a update on the Wiki.
Add the users in the Wiki settings ad they will form the group for the mailing list as well.
Good luck!
AJ

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

Is it possible to email a song from itunes?

Is it possible to email a song to someone from your itunes? If so, how is it done?

yes,click attach,click music,find song you want to email click on song

How can I restrict access to cloud storage from Creative Cloud? We don't want our users putting files outside the organization.

We need to restrict our users from storing files outside the organization. How can we restrict this capability?

They have Cs6, however I need to have my own copy, and the highest I can go with my system is CS5, maybe even 5.5. I've a small budget, and most copies are being sold for massive amounts because they're like collector items. I've seen the ones actually affordable within my range from sellers that arent trustworthy, or they're updates which I can't use. I had Cs2, but with updates to operating systems they stopped working. Thank you for your kind assistance.

GW 2014: Unable to send email outside system

Attempted install of 2014 eval and install went OK and I can receive emails from the outside but cannot send emails outside. Internal emails work fine and receiving internet mail seems OK but cannot send.
Verified that necessary ports are not being blocked..
I feel like the issue is part of the install and how the GWIA and Message transfer agents work.. Feels like I am missing some kind of connection here..
Other question I have that certainly may be related / cause of my issues is that I am real fuzzy on what my domain name / addressing should be..
I am using Windows Home Server for my domain with a domain name of XXX.HOMESERVER.COM (And using this name I am currently running a web server that works fine... )
With that in mind what should my MAIL record look like in DNS?
Also what should my DOMAIN name be in Groupwise? My server is called MAILHOST (pretty catchy eh?) so should my domain be MAILHOST.XXX.HOMESERVER.COM. ?
Sorry for the simplistic questions folks... I am an I/T guy but clearly email and DNS is not my strong suit...

Thank you for the reply! (I couldn't link the log file so I have copied and pasted some of it. Sorry for the long reply)
I notice that it repeatedly says that baldwin-telecom.net is down and this is not correct as that is my isp and is working fine otherwise...
Begin Configuration Information
00:00:00 0BA0 GroupWise Agent Build Version: 14.0.0 -115243
00:00:00 0BA0 GroupWise Agent Build Date: 03-27-14
00:00:00 0BA0 Platform= NT
00:00:00 0BA0 Domain and Agent= MyDomain.GWIA
00:00:00 0BA0 Foreign Name= <none specified>
00:00:00 0BA0 Description= <none specified>
00:00:00 0BA0 Alias Type= <none specified>
00:00:00 0BA0 Root Directory= C:\GroupWise\Domain\wpgate\gwia
00:00:00 0BA0 Work Directory= C:\GroupWise\Domain\wpgate\gwia\000.prc\gwwork
00:00:00 0BA0 Log File= C:\GroupWise\Domain\wpgate\gwia\000.prc\0702gwia.0 0e
00:00:00 0BA0 Directory ID= gwi27bb
00:00:00 0BA0 Directory Synchronization= NO
00:00:00 0BA0 Directory Exchange= NO
00:00:00 0BA0 Accounting= YES
00:00:00 0BA0 Convert GroupWise Status to Messages= NO
00:00:00 0BA0 Outbound Status Level= UNDELIVERED
00:00:00 0BA0 Log Level= Normal
00:00:00 0BA0 Log Max Age= 30 days
00:00:00 0BA0 Log Max Space= 102400 kb
00:00:00 0BA0 Enable Recovery= YES
00:00:00 0BA0 Retry Count= 10
00:00:00 0BA0 Retry Interval= 60 seconds
00:00:00 0BA0 Failed Recovery Wait= 3600 seconds
00:00:00 0BA0 Network Reattach Command= <none specified>
00:00:00 0BA0 Correlation DB Enabled= YES
00:00:00 0BA0 Correlation DB Age= 14 days
00:00:00 0BA0 Correlation DB Directory= C:\GroupWise\Domain\wpgate\gwia
00:00:00 0BA0 Send/Receive Cycle= 2 minutes
00:00:00 0BA0 Minimum Run= 0 minutes
00:00:00 0BA0 Idle Sleep Duration= 10 seconds
00:00:00 0BA0 Snap Shot Interval= 10 minutes
00:00:00 0BA0 Time Zone= CST
00:00:00 0BA0 GMT Offset= -6 hours, 0 minutes
00:00:00 0BA0 Hemisphere= NORTH
00:00:00 0BA0 Daylight Saving Change= 1 hours, 0 minutes
00:00:00 0BA0 Daylight Saving Begin= 3/9 (month/day)
00:00:00 0BA0 Daylight Saving End= 11/2 (month/day)
00:00:00 0BA0 SNMP On
00:00:00 0BA0 Startup Switches= /home-C:\GroupWise\Domain\wpgate\gwia
00:00:00 0BA0 /lang-EN
00:00:00 0BA0 End Configuration Information
00:01:08 0B14 Queuing deferred message: C:\GroupWise\Domain\wpgate\gwia\send\s3b3c8de.010
00:01:13 11F4 DMN: MSG 38 Send Failure: 450 Host down (baldwin-telecom.net)
00:01:18 0B14 MSG 38 Analyzing result file: C:\GroupWise\Domain\wpgate\gwia\result\r3b3c8de.01 0
00:01:18 0B14 MSG 38 Detected error on SMTP command
00:01:18 0B14 MSG 38 Command: baldwin-telecom.net
00:01:18 0B14 MSG 38 Response: 450 Host down (baldwin-telecom.net)
00:01:38 0B14 Queuing deferred message: C:\GroupWise\Domain\wpgate\gwia\send\s3b3e5d1.002
00:01:43 11F4 DMN: MSG 62 Send Failure: 450 Host down (optum.com)
00:01:48 0B14 MSG 62 Analyzing result file: C:\GroupWise\Domain\wpgate\gwia\result\r3b3e5d1.00 2
00:01:48 0B14 MSG 62 Detected error on SMTP command
00:01:48 0B14 MSG 62 Command: optum.com
00:01:48 0B14 MSG 62 Response: 450 Host down (optum.com)
00:04:49 0B14 Queuing deferred message: C:\GroupWise\Domain\wpgate\gwia\send\s3b43b3d.001
00:04:54 11F4 DMN: MSG 415 Send Failure: 450 Host down (baldwin-telecom.net)
00:04:59 0B14 MSG 415 Analyzing result file: C:\GroupWise\Domain\wpgate\gwia\result\r3b43b3d.00 1
00:04:59 0B14 MSG 415 Detected error on SMTP command

When a Task is Completed - is it possible to email the Delegated By person

Hello all,
I am just wondering if it is possible to email the Delegated By person on a Task once the Owner has Completed the Task.
If I select Relative User on Record I do not get an option of Delegated By.
If I select Specific Email Address I do not get an option of Delegated By email address.
Is this possible?
Thanks in advance,
Donal

Donal,
I'm sure you must have also seen Activity Owner's Manager option under related user list. Currently there is no option that allows us to send email to Delegated by.
An alternate would be
First call an Update After Wait Action and modify "Owner ID" field and assign it value of "Delegated By ID".
After this send email to owner as normal but the email will land to the delegated by user instead of the actual task owner since you swapped task owner with delegated by user.
Finally call Update After Wait Action again and modify "Owner ID" field again with "Delegated By ID" (i.e. swap back).
Caution: If you have any workflow that sends an email on task owner changed then that would conflict with this solution but nothing that you can't overcome.
Regards,
Abeer @ Sakonent

Send Emails Outside Domain

dear all,
i have OCS R2 on Linux AS. i can send send/recive emials localy but we need to start send/recive email outside the domian to send to hotmail, yahoo...etc.
i search alot and tried to configer the SMTP relay server but i am still not able to send emails outside domain
plz help me with the steps needed
regards
fadi

Hello,
Please use get-receiveconnector -identity "xxx" | fl cmdlet to check your
client frontend receive connetor configuration.
Please check your outlook client settings as the following article:
http://office.microsoft.com/en-us/support/set-up-email-in-outlook-2010-or-outlook-2013-HA102823161.aspx
You should check if you check encryption type. Under Outgoing server (SMTP), whether you select TLS and select SSL under Incoming server (IMAP) or Incoming server (POP3).
Cara Chen
TechNet Community Support

Exchange Report - Top 10 internet Domains Sending Emails to exchange organization

Hi guys
I've been getting alot of reports out of my exchange organization lately. mostly using powershell. A report im interested in is Top 10 internet Domains Sending Emails to exchange organization.
Anyone got a script getting that or willing to give me some pointers to write one ?
Thanks in Advance
Farhad

Hi
Thank you for your question.
You can refer to the following link :
http://exchangeserverpro.com/exchange-2010-message-tracking-log-search-powershell/
If you want the detailed script, you can ask the question on Exchange Development forum.
If there are any questions , please let me know.
Best Regard,
Jim

Is it possible to email Apple support?

I was going through the Apple Store and decided to apply for financing. I was approved with a limit that suited my needs but I was not logged in under my Apple ID at the time. I spoke online with an Apple rep and he apparently could not assign my finance account to my Apple ID. I don't always have time to call when I'm at work. Is it possible to email Apple and have them fix this issue?

Sorry, but Apple does not provide technical support nor customer support via email. But if you're in Canada and are applying for financing through Apple's partnership with Toronto Dominion, I don't see where in the application it ever asks for an Apple ID - when approved they send you an account number to use when you place your order - so I don't know if this links in any way. You'll have to call the Apple Store or TD to discuss it, though.
Regards.

Restriction user to access owa outside the organization

I need a policy that a specific group of user, they can access owa in inside the organizational network but when they go outside they cannot access owa outside network.
if possible please suggest

Hi,
Based on my research, we can block selected Users external OWA access by change the files
startpage.aspx and basicmessageview.aspx
For more information, you can refer to the following article:
http://blog.leederbyshire.com/2012/11/27/block-or-allow-selected-users-depending-on-location-in-microsoft-exchange-2010-outlook-web-app/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support

Is it possible to email more than one photo at a time with the iPhone? Thanks

Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

Yes. Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email. Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

Is it possible to email outside of organization?

Similar Messages

Maybe you are looking for