Is it possible to embed a Juicebox gallery to a Muse site that has not yet been launched?

I tried FTP'ing my gallery files to my current hosting service and pasting the link into the html object for the new site I'm doing in Muse, which I haven't officially launched. This didn't work. Does the Muse site have to be hosted and in the same directory as the gallery in order for this to fly? I don't know a thing about code or webpage development besides what I've poked around and learned using Muse over the past few weeks. Any insight would be greatly appreciated.

In short, yes, your site files including Gallery 'should' be on the same server and within the same directory structure. I say 'should' because technically that is the way it works. There is specific instances that it is not the case but in the case you are describing the answer would be they need to be together.

Similar Messages

Is it possible to export the html code from a muse site that I am building?

Is it possible to export the html code from a muse site that I am building?

Mac_Heibu has the right idea. When you export your site to HTML, it creates a folder that contains all of your pages. Here's an example of what the folder will contain. All of your HTML pages, all your scripts, CSS, and it'll also have individual folders WITHIN your main folder for your phone or tablet versions, if applicable. This method allows you to upload your files to an FTP host. However, if you're trying to upload it to an FTP, the BETTER option would be to go File > Upload to FTP Host. If this has helped you, please mark mac_heibu's answer as the Correct Answer, and feel free to mark my reply as a Helpful Answer.

Adding a Lightroom Gallery on an iweb site- that does NOT use .mac

I've been checking all past posts but only find references to adding a Lightroom Gallery in iweb if the user has mobile me/uses a .mac account. Someone else has asked this same question on July 20 and received no answers so far. Both of us using iweb '08. I've also gone the other direction but all Lightroom answers also refer to .mac accounts.
I've tried following the methods in past posts using html snippets and iframes but they don't seem to be a perfect fit without the .mac account. Anyone have any advice here? Many thanks.

I tested and it worked fine for me....
I went through Yahoo steps and had code generated...
Went to iWeb and on page I wanted to add chart, I clicked on the "Web Widgets" icon at bottom of iWeb page and picked "HTML Snippet" and then pasted code in area provided (where it says paste code), finally I hit "Apply" saved my pages and published. Worked fine.
Hope this helps you.

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

Is it possible to retrieve an earlier version of a powerpoint presentation that has been over-written

I accidentally overwrote a powerpoint presentation and need to get it back. Does anyone know if it is possible? thanks

Ok. If I recall correctly, Powerpoint saves each new version using a temporary file name, then deletes the old version of the file and renames the temp file to the correct name. This means that you have a chance that the old version might be recoverable. You now need to Google "Mac file recovery" and see what tools you can find.
IMPORTANT: As you continue to work on your MacBook you run the risk that some other file will overwrite the data you want from the disk. Everything you do from now increases the risk of this happening.
Good luck
Bob

When I make a contact sheet on Iphoto is it possible to put a title on top of the page, that is not a title of one of the photos?

Is it possible to put a title on top of the page in a contact sheet on Iphoto?

No. But you can create a text file for TextEdit, Word, Pages or other text application that you use, put a title at the top and print it on the already printed contact sheet. Just make the top margin in iPhoto's contact layout large enough so the title can be printed there by the other app.

Is it possible to create a Muse site that my client can edit using a content management system?

Muse is a great tool for a print based designers to be able to create websites.
However most clients want to be able to manage their content and hosting.

A good example would be this site for a holiday let business:- http://www.gurnard-pines.co.uk
The client called me and said they wanted a website design, they had a domain name and web hosting etc.
I created a design in Illustrator and asked a freelance web developer to code the site and incorporate a content management system, as the client wanted the ability to change the dates / prices / availability / attractions etc.
When I get asked to create a website, the client nearly always wants the ability to edit the content themselves to avoid the cost of implementing regular changes.
Hope this helps, feel free to call me on 07799 697646.
Stuart

Is it possible to pick up an incoming call from an extension that is not physically ringing?

Is there a way to pick up an incoming call from an extension that is not physically ringing?
For example if an incoming call was ringing at EXT 1019 and they were away from their desk momentarily, could the call be picked up from another extension by pressing a number sequence or something?
we are using UC560. if you could tell in detail how it can be setup(config) and how it will work.Thank you in advance.

Please rate helpful posts.
Thanks,
Alex
Here is the inof for the Call Manager Express.
Enabling Call Pickup
To enable Call Pickup features on SCCP or SIP phones, perform the following steps.
Prerequisites
•SIP phones require Cisco Unified CME 7.1 or a later version.
•The PickUp and GPickUp soft keys display by default on supported SCCP and SIP phones. If previously disabled, you must enable these soft keys with the softkeys idle command.
Restrictions
•SIP phones that do not support the PickUp and GpickUp soft keys must use feature access codes (FACs) to access these features.
•Different directory numbers with the same extension number must have the same Pickup configuration.
•A directory number can be assigned to only one pickup group.
•Pickup group numbers can vary in length, but must have unique leading digits. For example, if you configure group number 17, you cannot also configure group number 177. Otherwise a pickup in group 17 is always triggered before the user can enter the final 7 for 177.
•Calls from H.323 trunks are not supported on SIP phones.
SUMMARY STEPS
1. enable
2. configure terminal
3. telephony-service
4. service directed-pickup [gpickup]
5. fac {standard | custom pickup {direct | group | local} custom-fac}
6. exit
7. ephone-dn dn-tag [dual-line | octo-line]
or
voice register dn dn-tag
8. pickup-group group-number
9. pickup-call any-group
10. end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
telephony-service
Example:
Router(config)# telephony-service
Enters telephony-service configuration mode.
Step 4
service directed-pickup [gpickup]
Example:
Router(config-telephony)# service directed-pickup gpickup
Enables Directed Call Pickup and modifies the function of the GPickUp and PickUp soft keys.
•gpickup—(Optional) Enables using the GPickUp soft key to perform Directed Call Pickup on SCCP phones. This keyword is supported in Cisco Unified CME 7.1 and later versions.
•This command determines the specific soft keys used to access different Call Pickup features on SCCP and SIP phones. For a description, see the service directed-pickup command in the Cisco Unified CME Command Reference.
Step 5
fac {standard | custom pickup {direct | group | local} custom-fac}
Example:
Router(config-telephony)# fac custom pickup group #35
Enables standard FACs or creates a custom FAC or alias for Pickup features on SCCP and SIP phones.
•standard—Enables standard FACs for all phones. Standard FAC for Park Retrieval is **10.
•custom—Creates a custom FAC for a feature.
•custom-fac—User-defined code to dial using the keypad on an IP or analog phone. Custom FAC can be up to 256 characters and contain numbers 0 to 9 and * and #.
Step 6
exit
Example:
Router(config-telephony)# exit
Returns to privileged EXEC mode.
Step 7
ephone-dn dn-tag [dual-line | octo-line]
or
voice register dn dn-tag
Example:
Router(config)# ephone-dn 20 dual-line
or
Router(config)# voice register dn 20
Enters directory number configuration mode.
Step 8
pickup-group group-number
Example:
Router(config-ephone-dn)# pickup-group 30
or
Router(config-register-dn)# pickup-group 30
Creates a pickup group and assigns the directory number to the group.
•group-number—String of up to 32 characters. Group numbers can vary in length but must have unique leading digits. For example, if there is a group number 17, there cannot also be a group number 177.
•This command can also be configured in ephone-dn-template configuration mode and applied to one or more ephone-dns. The ephone-dn configuration has priority over the template configuration.
Step 9
pickup-call any-group
Example:
Router(config-ephone-dn)# pickup-call any-group
or
Router(config-register-dn)# pickup-call any-group
Enables a phone user to pickup ringing calls on any extension belonging to a pickup group by pressing the GPickUp soft key and asterisk (*).
•The ringing extension must be configured with a pickup group using the pickup-group command.
•If this command is not configured, the user can pickup calls in other groups by pressing the GPickUp soft key and dialing the pickup group number.
Step 10
end
Example:
Router(config-ephone-dn)# end
or
Router(config-register-dn)# end
Exits configuration mode.
Examples
The following example shows the Group Pickup and Local Group Pickup features enabled with the service directed-pickup gpickup command. Extension 1005 on phone 5 and extension 1006 on phone 6 are assigned to pickup group 1.
telephony-service
load 7960-7940 P00308000500
load E61 SCCP61.8-2-2SR2S
max-ephones 100
max-dn 240
ip source-address 15.7.0.1 port 2000
service directed-pickup gpickup
cnf-file location flash:
cnf-file perphone
voicemail 8900
max-conferences 8 gain -6
call-park system application
transfer-system full-consult
fac standard
create cnf-files version-stamp 7960 Sep 25 2007 21:25:47
ephone-dn 5
number 1005
pickup-group 1
ephone-dn 6
number 1006
pickup-group 1
ephone 5
mac-address 0001.2345.6789
type 7962
button 1:5
ephone 6
mac-address 000F.F758.E70E
type 7962
button 1:6

Embed Photoshop Web Gallery Into Site

I have been furiously scouring the internet for a tutorial,
walk though, or simply any information at all on how to embed a
Photoshop Web Gallery into a website that I'm creating using
Dreamweaver; unfortunately, I have found nothing of value. The
closest thing I found is someone saying "I just copied the html to
a table in dreamweaver..." which doesn't help a complete novice
(like me) at all.
If anyone could direct me to a thorough tutorial or writeup
the steps to take it would help me
tremendously. Thanks in advance for any and all help.

> Is it possible to embed a Web gallery that is in my
remote files into a
> template page so it will match my Web site?
Yes. Let's see your page as it stands now. Can you upload it
and post a
link?
The Object Not Found message means that there is a javascript
object that
has been left out of the page. A look at the code will tell
which one that
is.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sumnerweb" <[email protected]> wrote in
message
news:g6l8h6$m2b$[email protected]..
>I used CS3 to creat a Web gallery. We like all of our
pages to use our
>server
> side includes. I tried copying the code from the Web
gallery index page
> into
> one of my pages, but it didn't work. I get the gallery
heading and info,
> but no
> pics. Where the thumbnails and images should be I have
"Object not found!
> The
> requested URL was not found on this server. the link on
the referring page
> seems to be wrong or outdated. Please inform the author
of that page about
> the
> error."
>
> Is it possible to embed a Web gallery that is in my
remote files into a
> template page so it will match my Web site?
>

News details layout, how to embed in Muse site

I have seen several tutorials on how to use the News Module in a Muse site. However, there isn't a module for the details layout, and I don't understand how to use this feature within the framework and design of my Muse Site.
When the user clicks on the Subject link from the list layout module (which is easy to use) it takes to a un-designed page with the news item.
I see how to structure and edit the details layout, but not how to get it within my Muse site.
HELP?!

agm 123,
That is very kind of you to reply. However, I know how to use the MUSE widgets.
My question has to do with the BUSINESS CATALYST widgets and embedding them in a MUSE site.
Specifically, the News Widget, with the detail layout module. There only seems to be a way to use the list layout. My question is how to embed the detailed layout within my Muse site, using it's design and structure.
Anyone else?
Help, please!

Is it possible to embed keywords assigned in Lightroom 4 into DNG files?

Keywords I assign to photos in Lightroom do not show up as "tags" when I view the photo's properties in Windows Live Photo Gallery. Is it possible to embed keywords assigned in Lightroom to the properties of the photo file?

Thanks very much for your response. Ctrl-S saved the keywords to the DNG file properties. However, my original question was wrong. I should have asked how to save the keywords assigned in Lightroom to the properties of a TIFF file. Ctrl-S in Lightroom does not seem to embed keywords assigned to a TIFF file. When I check the properties of a TIFF file in Windows Live Photo Gallery after I have assigned keywords in Lightroom, the keywords assigned in Lightroom do not appear as "tags." Do you have any additional suggestions?

Is it possible to embed some JavaScript code WITHIN a QT movie?

Hi,
This may be a job for QuickTimeKirk, as I've seen (s)he seems quite knowledgeable about QuickTime secrets...
I'm using a blog service which does not allow the calling of external JavaScript files. Furthermore, testing STAMPot from my excellent fellow compatriot *Francis Gorge* (http://www.qtbridge.com/stampot/stampot.html) did not help me enough because the posts on my blog are contained within tables over which I have little control. In particular, I cannot write a full HTML page description with the <head> and <body> tags, and all the references needed to link to the .js file (and others) created by STAMPot.
So, I'm wondering if it is possible to embed the appropriate code directly within a QuickTime movie, e.g. under the form of a additional HREF track.
What I'm trying to achieve, in the end, is to have a poster frame for my movie, and have the movie play within that same poster frame space, but WITHOUT the movie controller +(not the poster frame controller, which I know how to hide)+, and then the movie looping back to the poster frame.
Maybe I missed something, but in the case I understood correctly what I read on the QT Dev web site, when one passes the controller="false" parameter to the +<embed src="<a class="jive-link-external-small" href="http://...>">http://...> tag, the parameter only applies to the FIRST movie, which is, in fact, the poster frame. Even if the target movie was saved with the controller disabled, this is only acknowledged by QuickTime Player, NOT by the QuickTime plugin.
Any help will be greatly appreciated!
Thanks in advance,
batspray

1- You can add a frame to the end of the movie, make it an href track that points back to the poster movie. Yes. Illustrated details, here: [http://developer.apple.com/documentation/QuickTime/QT4WebPage/samplechap/speci al-24.html]
2.- As to the larger question of JavaScript within the QT movie, No. "Starting with QuickTime 7.1.5, you can no longer issue javascript: URLs or call JavaScript functions from within a QuickTime movie. This feature was removed from QuickTime for security reasons." See this official notice: [http://developer.apple.com/documentation/quicktime/Conceptual/QTScriptingJavaScript/bQTScripting_JavaScri_Document/chapter_1000_section1.html].

HT5361 Is it possible to embed raw latex into a mail message to display an equation?

Hi,
Is it possible to embed raw latex (or any other meta data format like HTML) into a mail message? I would really like to be able to send equations directly without converting them to PDF or GIF first.
Thanks,
Joe

I just borrowed a quadratic equation from the MathML Wikipedia site and grafted it into an HTML document. It imaged fine in Safari 7. It should be noted that neither the latest Google Chrome or FIrefox rendered the same content accurately.
Laying out your entire email message (including MathML) in HTML can be tedious. Once it is displayed in the browser, each use of the command+I will put the browser content in a new Mail compose window. So, you cannot add an equation to existing Mail composition. Select, copy and paste (or paste and match style) will not work either.
Depending on the importance you place on email equations, at one time, Design Science (MathType) claimed compatibility with Apple Mail (4.5) where you could input your equation in MathType and it could then be placed within the email. The mail recipient would not need a copy of MathType installed for this to work. MathType even allows you to key your equation in with LaTeX syntax to generate the equation.
You could check with them about functionality (or restrictions) with Mail 6 and 7 on OS X, as it might provide a more productive way to achieve your goals.

How do you embed a photo gallery created in adobe bridge to a webpage?

HI,
Help would be appreciated, i have created a photo gallery using adobe bridge but i am struggling in finding a way to embed the gallery to a webpage. I do not dreamweaver. Can anybody help?
Many thanks

It is a little more difficult to do this without DW or a similar app. but it can be done using regular html code and creating Links on your Home/index page to your Galleries.
Each complete Gallery folder needs to be uploaded into your Site folder on the Server which hosts your web site and you create separate links on your Home page to each of them.

Is it possible to Embed a PDF and command by a button within a PDF document

Is it possible to embed a fillable PDF form onto a PDF document and using the button to open the embedded file?
I am using XI Pro.
Thanks.
Jj

Files cannot be "embedded" in a PDF.
Attach the form PDF to the not-a-form PDF.
Create the Button field on the not-a-form PDF.
For the Button's Action select "Go to a page view".
You'd open the attached form PDF.
The Action wll look like:
Mouse Up
    Go to a page in another document
           File: PDF attachment
           Page: 1
           Zoom level: Fit Page
The default "Open" for the attached PDF is "Window set by user preference".
You can edit this to select either "New Window" or "Existing Window".
Be well...

Is it possible to embed a Juicebox gallery to a Muse site that has not yet been launched?

Similar Messages

Maybe you are looking for