Is it possible to embed one form into another form?
I have two Oracle 6i forms - Form A and Form B.
Both forms are accessed independently at this time (from separate menu entries).
I would like to add a new tab on Form A that, when selected, opens Form B within Form A (e.g. I wish to embed Form B into Form A).
Is this feasible to do? I'm aware that it is possible to launch Form B from Form A (using a button) but we'd prefer to directly embed Form B into a tabbed window on Form A, if it is technically feasible to do.
Greatly appreciate any suggestions or insight anyone can provide as per whether or not this is feasible.
Kind Regards,
Jeremy
Thanks Andreas -- this is what I was assuming based on the research I've done so far.
Would you happen to know if it is possible to open Form B (in a new window) when a tab is clicked on Form A, or can this only be done when a button is pressed on Form A (when-button-pressed trigger)?
Regards,
Jeremy
Similar Messages
-
Embed one project into another (nesting)
One feature that I would love to have in a slide show software is the ability to embed one project into another. Is this a feature of Keynote?
Here is where it would be handy:
I was in a band an we needed to put all of the lyrics for our original songs up on the big screen when we were playing. Neither or "set list" nor order was finalized, but was going to be 10 songs out of a possible 15. We wouldn't know until only minutes before going on. Since I play bass and had to be on stage, I had to have it simple enough for a 12 year old kid to run the presentation.
I could figure no way that I could possibly cut and paste and remove all the slides into the correct order right before going on stage. I worried about this for 2 days and figured out what to do.
I used Adobe Indesign and set each song up as it's own file. Then using InDesign's build book feature, I linked all the files into a book file. 5 minutes before the show, I resorted the chapters in the book file, and exported to PDF. I ran the PDF in full screen mode and the 12 year old girl just sat there and hit the spacebar for our songs. It worked perfectly.
Is there a way that I can do separate projects in Keynote and assemble them quickly like I did with InDesign and Acrobat?
Thanks,
KirkOK, if you don't want them all in the same Keynote file so you can hyperlink around the file to the desired slide numbers, then try this.
Create your Keynote of a song. Name it easily so you can find it easily. At the end of each song keynote, put a "Return to Index" and hyperlink it to the Keynote with the program. On the program slide you can Name the songs, Song 1, Song 2, Song 3, and Song 4. Of course, you can enter the name of the song in the program slide. If you use the generic name the process of creating the hyperlink is an easy one (it's even easy if you enter the name of the song you want). If you keep all song Keynotes in the same folder with the index, it's a matter of selecting the file title as the Keynote slideshow to hyperlink to. So you can change the four songs in a program presentation in about 2 minutes max. so you get:
File name: Agenda
Modern Church of God
Sunday, October 10, 2010
Reverent I M. Religious, presiding
10:30 am
Call to order
Song 1 (hyperlink to "Rock of Ages")
Processional
Prayer
Song 2 (hyperlink to "Bringing in the Sheaves")
Announcements
Reading
Song 2 (hyperlink to "Ave Maria")
Sermon, "How do we maximize our resources."
Song 3 ((hyperlink to "Jesus Loves Me")
Digressional
Song 4 (Oh, What I friend we have in Jesus)
At the end of the Rock of Ages lyrics Place
"Return to Program" and hyperlink to "Agenda"
For the next week, "Agenda 10/17" Change the hyperlinks for songs to the new selection of keynotes you have created earlier. It will take about a minute or two to make the changes. You do each one by clicking the Enable hyperlink selection box when one of the song references is selected. The pull the pull down menu to Keynote Slideshow. A box will open. Go to your folder with all song and agenda files. Select the song keynote you want to access with the click, when you select the song file and click "Open" your connection is made. You then project the agenda file on Sunday morning. When you reach song 1, you click on it and the song's keynote comes up. When the song is finished, click on Return to Program and your program Keynote is back up.
The only time consumer in this process is entering the song lyrics into their own keynote files. If you have somewhere to copy and paste the words, then it's easy. The mechanics of creating the weekly connection is very easy. Once you have your resources created, preparation time for a Sunday program will be only a long as it takes you to enter the planned agenda components. -
How to merge one library into another library?
In iPhoto 9.6, is it possible to merge one library into another library? Or otherwise, import individual pictures, from one library into the other library? All of this happening on the same computer.I understand that this feature was covered by Aperture but that this is no longer supported under Yasemite?
No
The current version of Aperture can merge libraries (I have no idea where you got the incorrect information that it can not)
The paid version of iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can
Those are you only two choices
LN -
Opening a link from one iframe into another
Hello,
I have a web template in which there are three iframes. Each Iframe has a different web template embedded in it. I want to open a link present in one iframe into another.
Example:
iframe 1 (id: left) contains a link google dot com (or a link to a different web template)
when i click on the link, i want this page to open in iframe 2 (id: right)
Can anyone help me on how this can be done? I'm working in WAD7.0 and hence iframes.
Another question related to this is:
Can we create resizable iframes? In the older version of WAD, HTML was used and this was possible through framesets.
In NEW WAD 7.0, XHTML does not support framesets. So is there any other way to do it?
Regards,
SameerEither file is corrupt, theres' a corresponding .idlk file in the same folder, or it isn't really an indesign file.
How was the file transfered? What is the file extension? -
How can I copy one sheet into another spreadsheet or another file?
I am trying to copy a sheet from one file into another. Is that possible in Numbers?
Open both documents.
Click on the sheet icon of the sheet you want to Copy fom the Source document. Copy
Switch to the second document.
Click on the icon of one of the Sheets on that document. Paste.
The copied sheet (and its contents) will be pasted into the list immediately below the selected sheet.
Regards,
Barry -
How to include one view into another view
Hi SDN's,
Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
LIKP-KUNNR -> KNA1-ADRNR
KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
LIKP-ERNAM -> USR21-BNAME.
USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
USR21-PERSNUMBER -> ADR6-PERSNUMBER.
In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim -
Object Creation Of One class into another and vice versa
Hello Everyone,
My name is Prashant Sharma from Jaipur [Rajasthan]
Can u people help me
How to create of one class into another and vice versa
Eg,
I am having class A and class B
I want to create object of class A into class B and vice versa
Plz help me out of this problem as soon as possible....Read this: [Creating Objects|http://java.sun.com/docs/books/tutorial/java/javaOO/objectcreation.html]
Then, do one of these three:
1. Create an instance of the class
2. Extend the class
3. Access methods within the class
Try it out. Post the problem code if you're having trouble. -
ABAP Function Module Example to move data from one Cube into Another
Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PMThis is the start routine to duplicate records in two currencies.
DATA: datew TYPE /bi0/oidateto,
datew2 TYPE rsgeneral-chavl,
fweek TYPE rsgeneral-chavl,
prodhier TYPE /bi0/oiprod_hier,
market TYPE /bic/oima_seg,
segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
move-corresponding s_data_pack to DATA_PACKAGE.
if DATA_PACKAGE-loc_currcy = 'EUR'.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
DATA_PACKAGE-CURRENCY = 'EUR'.
APPEND DATA_PACKAGE.
else.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency. -
I need to include one workflow into another
I need to include one workflow into another
IAM try to include one workflow into another workflow, whether it is possible or not.
if it is possible means, give the step to perform this action and some sample logicHi,
You can achive this in a very simple way.
Create a activuty step. ( In general we need to create a task here )
Add/ paste the workflow template number insead of creating the Task.
Make the required binding.
Thanks and regards,
SNJY -
Inserting data from one table into another table using PL/SQL
HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
BEGIN
INSERT INTO riverside2
(charac_id)
VALUES
(x);
INSERT INTO riverside2
(charac_id)
VALUES
(y);
END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
BEGIN
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id = x);
END zorgs_gorfs;
/can someone kindly sort me outmodify this sql
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id = x);as
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick. -
When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?
The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel -
How to get a value from one item into another
How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael -
Adding multiple same-name nodes from one xml into another
Hi,
Following on from my question the other day (Adding multiple different nodes from one xmltype into another), I now have a slightly more complex requirement that I cannot work out where to start, assuming that it's something that can reuse some/all of yesterday's work (thanks again, odie_63!). ETA: I'm on 11.2.0.3
So, here's the (slightly amended) xml along with yesterday's solution:
with sample_data as (select xmltype('<root>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
</xmlnode>
</root>') xml_to_update,
xmltype('<a>
<b>valb</b>
<c>valc</c>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<e>vale</e>
<f>valf</f>
<g>
<g1>valg1</g1>
<g2>valg2</g2>
</g>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
<multinode>
<name>fred</name>
<type>book</type>
<head>1</head>
</multinode>
<multinode>
<name>bob</name>
<type>car</type>
<head>0</head>
</multinode>
</a>') xml_to_extract_from
from dual)
select xmlserialize(document
xmlquery(
'copy $d := $old
modify (
insert node element extrainfo {
$new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
} as first into $d/root
return $d'
passing sd.xml_to_update as "old"
, sd.xml_to_extract_from as "new"
returning content
indent
from sample_data sd;
That gives me:
<root>
<extrainfo>
<b>valb</b>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<f>valf</f>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
</extrainfo>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
</xmlnode>
</root>
However, I now need to add in a set of new nodes based on information from the <multinode> nodes, something like:
<root>
<extrainfo>
<b>valb</b>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<f>valf</f>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
<newnode>
<name>fred</name>
<type>book</type>
</newnode>
<newnode>
<name>bob</name>
<type>car</type>
</newnode>
</extrainfo>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
<type>book</type>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
<type>car</type>
</xmlnode>
</root>
If it's easier, I *think* we would be ok with something like:
<newnode>
<type name="fred">book</type>
<type name="bob">car</type>
</newnode>
The closest I've come is:
with sample_data as (select xmltype('<root>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
</xmlnode>
</root>') xml_to_update,
xmltype('<a>
<b>valb</b>
<c>valc</c>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<e>vale</e>
<f>valf</f>
<g>
<g1>valg1</g1>
<g2>valg2</g2>
</g>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
<multinode>
<name>fred</name>
<type>book</type>
<head>1</head>
</multinode>
<multinode>
<name>bob</name>
<type>car</type>
<head>0</head>
</multinode>
</a>') xml_to_extract_from
from dual)
select xmlserialize(document
xmlquery(
'copy $d := $old
modify (
insert node element extrainfo {
$new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
, element newnode {
$new/a/multinode/name
,$new/a/multinode/type
} as first into $d/root
return $d'
passing sd.xml_to_update as "old"
, sd.xml_to_extract_from as "new"
returning content
indent
) fred
from sample_data sd;
Which produces:
<newnode>
<name>fred</name>
<name>bob</name>
<type>book</type>
<type>car</type>
</newnode>
- obviously not right!
Can anyone provide any hints? I've tried searching for similar examples, but I mustn't be putting in the right search terms or something!odie_63 wrote:
or, similarly, to get the alternate output :
copy $d := $old
modify (
insert node element extrainfo {
$new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
, element newnode {
for $i in $new/a/multinode
return element type {
attribute name {data($i/name)}
, data($i/type)
} as first into $d/root
return $d
So we're going with the second method, but I've discovered that the "$i/name" node is not always present. When that happens, I would like to use a default value (for example, "george"). I promise I've searched and searched, but I'm completely failing to turn up anything that sounds remotely like what I'm after (seriously, I can't believe my google-fu sucks this badly!).
Is there a simple way of doing it? The only thing that I've found that looks vaguely relevant is "declare default namespace...." but I'm not sure that that's the correct thing to use, or if it is, how I'm supposed to reference it when populating the attribute value. -
How can I move part of one photo into another photo?
In older versions of Photoshop you could see two or more frames in the work area and cut an paste parts of one photo into another photo by using the "move" tool after the area to be moved was selected. I am having trouble discerning how to achieve this action in CC. Could someone in the forum with this experience give me some steps to take to complete this process? Thanks.
Thanks Trevor!
Bill Coan (BillCoan Photographs)
Moravian Falls, North Carolina
336-928-0498 (c)
336-903-8674 (h)
On Mon, Jun 16, 2014 at 6:48 PM, Trevor Dennis <[email protected]> -
How to copy one schema into another
I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
I have a dmp file of source-schema (created daily with expdp by our backup schedule).
Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
The dmp file was created with:
expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
Create the copy on dest-schema with:
impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
(dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
If this approach is not feasible, kindly suggest me an alternative.
Thank you.
Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)Thank you both. Dean, I've made a note of your proposed command. May use it next time.
In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
First I ran these command logged in as SYS
GRANT Import Full Database TO dest-schema;
GRANT Create Any Directory TO dest-schema;
GRANT Unlimited Tablespace TO dest-schema;
impdp
dest-schema/pwd
DIRECTORY=dmpdir
DUMPFILE=myproject.dmp
REMAP_SCHEMA=source-schema:dest-schema
TABLE_EXISTS_ACTION=REPLACE
LOGFILE=implog.log
There were some errors though. The import process complained about constraints referencing non-existent primary keys.
It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
- are not part of the DUMP file
or
- are in the DUMP file but skipped during import
Don't know if this is a bug or by design behavior.
Maybe you are looking for
-
The page dont open in the first try
I have to click on the (x) in the addressfield and then click on the arrow (Update page) When you have opened a page it works fine the next time you open it. I have updated everything, stopped many programs to start when windows (xp) starts, reset an
-
Ok stupid question, but Do I have Shockwave player? I don't ever recall installing it nor do I want it but some odd things make me wonder if I have it If I do, then I haven't updated it and that concerns me. When I look in these location, I do not fi
-
Hi, While i am printing the tds certificate break up is not coming. means tds,surcharge,education cess its not showing the break up its showing the total tax deposited. Amount paid or credited also showing a less amount compared to total tax depostit
-
I am receiving the following error when I try to forward a task through the Universal Worklist: This item is no longer valid. Select another item or refresh the item list view. Error Detail: Tue Aug 16 15:02:50 EDT 2005 (Item) Item is missing from
-
Encode Video Files not working for avi files
Hi, I've been trying to convert some .avi files to apple format using Lion's native 'Encode video files' function however keep getting a 'avconvert: source file not found for source file://fileparthhere avconvert: failed to create an export session.