Is it possible to embed video in keynote presentation when exporting to .pdf?

You can place the video in Keynote but it will be exported as a still.Adobe Acrobat Pro is needed to embed video in a PDF page.

Similar Messages

Is it possible to embed fonts in Keynote theme?

I've created custom theme for Keynote'08 and everything works fine.
My theme uses corporate fonts.
At the moment the theme is distributed with additional font pack and the user have to install both, but I'd like to simplify the theme installation process.
Is it possible to embed fonts in Keynote theme?

Got it, and it make sense...
I was thinking about something like adding fonts to theme-files folder,
but well, I can live without this "feature".
Thx Your for the answer.

Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?

Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?

Thanks Gary, I think I should have mentioned that I have wired my other speakers and it works fine.
I just wanted to go wireless when presenting in front of class, simply to avoid trailing wires from the macbook which I position in front of me on a desk next to the projector and the speakers are behind me next to the screen.
I have struggled to find a solution, and reading through other discussions it is a problem that perhaps only Apple can solve.
I hope the new 'Yosemite' will resolve the problem.
Thank you once again for your reply.

Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
I'm using FCPX 10.2
Yosemite 10.10.3
MacBook Pro (13-inch, Early 2011)
2.7 GHz Intel Core i7
8 GB 1333 MHz DDR3
500GB with 308GB free

It appears Apple's latest update has solved the issue. Whew!
MacBook Pro (13-inch, Early 2011)
2.7 GHz Intel Core i7
8 GB 1333 MHz DDR3
500GB with 308GB free
Yosemite 10.10.3
FCPX 10.2

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

Is it possible to embed video from another site in wiki?

every-time i try and add in html code to embed video in the wiki page (not podcasts) it deletes it after i save and nothing happens

Hi,
The current wiki relies on html 4:
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Embed tag is not a standard part of html 4 and is new in html 5. html 4 allows the object tag or the iframe tag to perform the external link function. Both object and iframe need to be added to the wiki whitelist for inclusion in the page html.
iframe creates a separate window that allows you to show the page with the video or rss link that you want to include on the wiki page.
object would show up as an separate window as well but has different issues depending on brower.
I have used iframe with good results as an alternative to uploading data to the wiki page.
HTH,
Harry

Merging video and keynote presentations

Is it possible in iMovie to combine a video of a person giving a presentation with a keynote presentation in order to creat the effect that we see at the keynote speeches. If not, does anyone know of any mac software that can do that?
Thanks,
Ged

When using a voice over using the record slide show facility, the timing of every slide is set when advancing to the next slide.
To enable manual timings on one slide, you will need to place individual sound files on each slide, created in a sound editing application such as QuickTime.

How do I share a Keynote presentation when iWork ceases?

My keynote presentation is enormous so e-mailing is not really an option, the recipient is new to all things iPad, so what is the easiest way to share a presentation?
I know I can upload it to my computer but that seems unweildy.
If they are ditching iWork they should have a solution, but iCloud only seems to work with your own documents and devices....

Not done, sorry.
so sending by mail didn't work either, because the Keynote 13 file could not be attached to a mail!!!!!!!!!!!!!!!!!!!!!!!!! (Keynote 09 can as can PowerPoint). This is ridiculus. This is Apple trying really hard to make it impossible for people to work with their software

Is it possible to get transparent background when exporting to PDF?

When exporting a document to PDF, Pages turns the background white instead of keeping it transparent. I need it to be transparent. Can anyone tell me what to do to fix this?
When I print a document I use stationary that is in my printer. When I want to send the document by email I need to combine my text with my stationary (on the same page). In CS4 InDesign this is really easy with switching layers on/off, but I don't want to use InDesign for my wordprocessing, but Pages. In Pages I can add a background, but I can't switch it on/off. So now I use AcrobatPro 9 to combine my text document with my stationary, adding it as a watermark or background. This does not work with documents I made in Pages since Pages makes the background of a document WHITE when it exports to pdf. Instead it needs to be TRANSPARENT.
By the way: MS-Word gets it right: it keeps the background transparent when making a pdf. But I don't want to go back to Word, I just want Pages to do it right...
Any suggestions how I can make this work? Thanks!

Hi marchaarman
Pages has an odd behavior, it actually puts 2 white backgrounds in the back of its documents.
This confounds Acrobat which inserts watermarks in front of the 1st background but sandwiched under the 2nd.
MsWord does not actually make a transparent background it just makes the 1 white background, or whatever the paper color may be.
If you want your watermark, you will need to add it in Pages, possibly as a master object in a section template that you can eliminate or add as you want.
Peter

Adio and Video not in sync when exporting QT Movie

Hi guys,
I'm having a very strange problem here. I'm using FCS2 and have edited a sequence in FCP using HD720p. In Final Cut Pro, everything is fine, I can play the sequence and the adio matches the video as expected.
When I export the sequence to a QuickTime movie, the final movie has the adio way out of sync from the Video. I have searched through this boards and noticed some other users having the same problem, but couldn't find a solution for it.
Does anyone know what would be the problem, and how I could solve this ?
Thanks a lot in advance,
Stefaan

Hi,
Well, I could try, but I'm not 100% sure that this was the exact source of the problem.
The source media where Screen Captures taken with iShowU, which I was going to use to create a video podcast with. The ScreenCast was recorded using the HDTV 720p codec with 25 frames and 44,0 KHz audio. I imported those clips into FCP6 and noticed that the Sequence preset had 48,0 Khz audio instead, so I imported every source clip into Soundtrack Pro to convert the audio back to 48,0 KHz.
I guess that is where it went wrong somehow. Since at some point FCP indicated that one of the source clips had 44,0 KHz audio and not 48,0 KHz audio ( though in SoundTrack it reported 48,0 KHz ).
I imported the stuff back into FCP and noticed that now the audio of the clips was 48,0 KHz audio, so I was ready to go. I did the cut in FCP and audio was perfectly in sync with the video. Upon export to a QT Movie ( Self Contained or Reference, immediately from FCP or through Compressor 3 it didn't matter ) the sound seemed to be out of sync after a period of time. By the end of one 15 minute clip the sound was about a minute off, which is unusable for a screencast.
Thanks to a suggestion here I exported the original clip from within FCP to a new QuickTime movie containing only the audio, and one containing only the video portion. I dragged those two on a new Sequence and did the cut again.
Once that was done, the export was perfectly in sync.
My guess is that it went wrong in Soundtrack somewhere, and not really in FCP. But I'm not 100% sure though.
I hope this helps for some others who might have a similar problem.
Regards,
Stefaan

Audio/Video out of sync when exporting to MPEG4

I am working on a project that is being edited on FCP 5.1.4
Anyhow, there is problem when exporting to MPEG4- the audio/video is out of sync.
Sequence settings show 29.97 editing base with 48 mhz sound, which is the same as the MPEG 4 settings, but they are not in sync. Anyone encounter this problem? I've never had this problem before previously.
Thanks
Caitlyn

Hi Harm,
last time you suggested the same but I wouldn't know how to take the BM card out of the equation. I only have on station. If I export to Beta SP there is no problem.

Is it possible to choose which template to use when exporting to word?

Hi, just wanted to know is it possible to have more than one word template and be able to choose from these templates when exporting a document to word. Another question, can we choose the print layout at the point of clicking print, instead of selecting a default one in the PLD beforehand? Thanks.
(Using SAP Business One 2005B PL41)
Edited by: Tan Gavin on Oct 8, 2008 10:14 AM

Hi Tan Gavin
The answer to both questions is unfortunately NO. The templates are linked to specific events or triggers in the system and cannot be changed or determined by any user. With the PLD the limitation is that if you want different layouts, the only way is to change default the whole time. But bear in mind that the default could be set by user, BP or both. This does allow the system to use a different layout for each user or specific BP's.
Kind regards
Peter Juby

Audio and video do not sync when exporting

the audio and video content do not sync when exporting to media browser or quicktime.. at times the audio is delayed, or ahead of the video

Wow, I was just about to post something similar. I've tried 4 different times, wasted a few dvds, and tried various ways of outputting to solve this...nothing. Here's my situation;
• I have a series of stills, with music underneath...kind of like a slide show.
• That ends, both music and visual, and I go to a black screen/slug that is :22, to give some breathing room before the video that follows. Also, the audio track fades out at the end of the stills...it does not continue into the slug.
• After the :22 of black, I fade into a video. HOWEVER, everytime I've done that, the AUDIO portion of that video is starting while there's still black on screen, then when the video comes in, it's way behind.
I've adjust the audio to now end before the slug, thinking that was somehow making iMovie go wonky. Didn't work. I've wasted a few dvds before I got smart and started checking before burning. And still, everytime, that section is not syncing, but, i syncs in iMovie, where I made the video.
This is HUGELY frustrating.

Possible to embed video with controls in FM PDF?

I have a very specific end in mind, and I'd like to know from you folks who might have done this before if it's even possible, and if so, the steps to follow to achieve it. Here goes...
I'd like to take an ordinary AVI file, convert it FLV in Media Encoder so it's of a manageable size, bring that into Flash in order to add controls to it (stop, start, pause, etc.), import the SWF file into FrameMaker and export a stand-alone PDF file than includes the video, without needing to reference any external files or servers or anything like that. Just one PDF file that includes the demonstration video and the means to run it.
Right now the show-stopper seems to be it's possible to create a SWF file with controls, OR a SWF file that encorporates an embedded video source, but NOT BOTH at the same time. Anything that enables you to have controls seems to insist on referring to an external file, which I need to avoid.
Then the problem becomes is it even possible to import such a SWF file, with working controls, into FM and thread it through to a PDF file where it will function as such?
Anyone who can point me the way, I'd be much obliged. And thank you.

Thanks, but I've seen that file before. While it's interesting to learn you can create links below a video to do this, the really ironic thing is that the PDF file contains video presentations making use of the controls that I'm looking to include (see graphic). In fact, it was this very document that got me interested in seeing how to do this in the first place. Now, I might be mistaken, but I don't think this is a solution available inside FrameMaker itself and I'm really after a cross-application procedure from someone who's done this in the past. I appreciate the input, though.
From page 25 of the guide:

Possible to embed video ?

Hi, I have a couple videos in a shared folder and I imported them in my premiere element 9 project. But someone else changed the path of the videos or changed the name of the folder then I had to relink everyone.
I wonder if there's a way to fully embed the video to the project just like breaking the links and embed the images in Illustrator? Even the source files changed, it wouldn't affect my premiere project?
Thank you so much!

For a little background on the Project files (PREL), see this article: http://forums.adobe.com/thread/477920?tstart=0
For some more detail on Asset file linking, see this article: http://forums.adobe.com/thread/990503?tstart=0
Good luck,
Hunt

Is it possible to embed video in keynote presentation when exporting to .pdf?

Similar Messages

Maybe you are looking for