Is it possible to enhance HRPAD31?

Hi~~
I want to enhance table HRPAD31 using structure PAD31.
The result of Transaction DDCHECK is that HRPAD31 can be enhanced (Char.-Type).
If an enhancement of HRPAD31 is possible, then How can I enhance that table?
PAD31 has no CI_XXXXX Structure.
Thank you!!

Thank you for your kind reply.
But I don't understand how to enhance ZCI_HRPAD31 as a normal Infotype.
For example, HRPAD25 has a structure CI_PAD25 for customer enhancement.
So I can create CI_PAD25 structure.
But HRPAD31 has no CI structure.
Do you mean standard table modification?
If not, how can I enhance ZCI_HRPAD31 as a normal Infotype?
Thanks.

Similar Messages

  • Is possible to enhance the resolution of a FLV

    I have downloaded some FLV videos from many sources like Youtube, Vimeo and Daily Motion.
    Is it possible to enhance the resolution of this videos to be watched in a HD television?
    I have tried the video conversion using flv converter to pass from flv to formats like avi, but the quality is not good.
    I think that maybe if i mantain the video fromat is it possible to enhance the resolution and get a better image.
    Is there a tool or a flash player that can enhance the resolution of a video downloaded from the web?
    Thanks
    Joan
    http://clipyoutube.blogspot.com/

    Without the original FLA file or video (AVI, WMV etc.) it was created from the answer is... to put it bluntly... no.
    One drawback of YouTube downloaders is they are WYSIWYG. They download videos in a FLV format with whatever resolution they are on the site, which is, to keep from taxing bandwidth, low res, and small size. 460 x 320 usually at the most.
    Blowing those up to the size of a TV screen blurs them terribly.
    By example:
    A standard def DVD is 4.3 gigs
    An HD DVD is around 7.6 gigs
    A "ripped" DVD (AVI) as anywhere from 700Mb to over a gig and a quarter.
    A high quality MPEG is about 100MB per minute.
    The average FLV downloaded through a YouTube downloader is about 4Mb.
    1 Mb per minute vs 100.
    The compression that goes into making a video suitable for a site that has billions of views of millions of videos hourly, degrades the qualtiy tremendously to accomodate streaming bandwidth. They have to be made for a 5 inch by 3 inch viewer.

  • Is it possible to Enhance 0TCT_C* BI Statistics Cubes

    Dear SDN's,
    We successfully installed BI Statistics Cubes in our BI 7.0 system.
    But we want Costcenter to be avilable in all the BI Statistics Reports.
    Is it possible to enhance all 0TCT_C* cubes with costcenter.
    Are we need to do enhancement for virtual cubes also i.e 0TCT_VC* (or) only enhancement to 0TCT_C* Cubes
    Please let me know ASAP
    Thanks and Kind Regards,
    Lakshman Kumar G

    Dear Priyanka,
    I added costcentre as a navigational attribute to 0TCTUSERNM and made a transfer routine to Costcentre.
    My client wants to see which user belongs to which costcentre and how much frequency he using the cubes or queries.
    Please let me know which is the best option
    (1) adding as a navigational attribute to info object
    (2) enhancing and coding the 0TCT_C* cubes,
    Thanks and Kind Regards,
    Lakshman Kumar G

  • Is it  possible to enhance transaction S_PL0_86000028?

    Hello Gurus,
    I need to add 'Cost Center' to the output of 'S_PL0_86000028'. It is a standard report created by Report Painter tool.
    Is it possible to enhance this report. If yes, how? . Or is it possible to copy this report and create a custom report with the requirements.Please help.
    Thanks in advance

    Hi Rojer,
    Pleas try to  modify youre report painter using belwo
    Go to Tcode:FGI2 &  select 0SAPBLNCE-01 report from report type 2 & you can add cost center from characteristic list.
    It may be helpfull for you.
    Regards,
    Prasenjit

  • Is it possible to enhance the dynamic search with Option field with custom

    Hi All,
    is it possible to enhance dynamic search with OPTION parameter like Equals to , Between etc, instead of these are we able to add our own? If yes, then which are steps need to perform.
    Thanking you.
    Regards,
    VjMHyd

    Just to test is this possible i wrote a sample program
    data: lr_dquery type REF TO cl_crm_bol_dquery_service.
    data: lv_status TYPE CRMT_PROCESS_DESCRIPTION.
    data: mv_bol_core type REF TO cl_crm_bol_core,
            lr_result_obj type ref to if_bol_bo_col,
            lv_opp_id type string,
            lr_entity type ref to cl_crm_bol_entity.
    MV_BOL_CORE = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
    MV_BOL_CORE->START_UP( 'BT' ).
    *data: lv_opp_id type string.
    lr_dquery = cl_crm_bol_dquery_service=>GET_INSTANCE( 'BTQOpp'  ).
    if lr_dquery is bound.
    *   prepare the selection paramters
      lr_dquery->add_selection_param(
        exporting
          iv_attr_name =  'OBJECT_ID'   " Component name
          iv_sign      =   'I'  " Inclusion/exclusion criterion SIGN for range tables
          iv_option    =   'PI'  " Selection operator OPTION for range tables
          iv_low       =   lv_opp_id
    *   Get the dynamic result object and read the opportunity status from there
      lr_result_obj ?= lr_dquery->get_query_result( ).
      lr_entity ?= lr_result_obj->get_first( ).
      if lr_entity is bound.
        lr_entity->get_property_as_value( exporting iv_attr_name = 'STATUS'
                                    importing ev_result = lv_status ).
      endif.
    endif.
    BREAK-POINT.
    No syntax error but junk values returned as I had not written the logic for retrieval based on this operator. This means that if you add the selection_param to the dynamic query and then handle that same thing in the GENIL class for the component then you would be able to retrieve the values based on this.
    On the UI , you would be retrieving all the operators for the parameters. There for that particular field you have to add the new operator for your case. And this would be send to the Dquery class and added as a selection param. When the query is executed, if the genil class has been updated to handle this parameter, you should be able to retrieve the results.
    Regards
    Kavindra
    Edited by: joshi_kavindra on Jan 19, 2012 2:45 PM
    Edited by: joshi_kavindra on Jan 19, 2012 2:53 PM

  • Is it possible to enhance 3D files handlers?

    Hi,
    Is it possible to enhance 3d files handling ? I mean a feature which could list the texture files used in a 3D model, something close to the InDD file handler which is able to list referenced files...
    Thanks

    Either put all the meshes into the same U3D file, or load them as Resource objects using JavaScript. You can show/hide the parts and define a new view from the 3D toolbar, or use scripting to set the visibility of each node in the model (by searching for its name).
    Doing it without scripting is the easier option, but assumes you can assemble your models into a single U3D file. Scripting the entire thing is more complex but allows you to work with whatever U3D files you already have - we'll have a tutorial on how to do it later this month, but if you're a total newcomer to Acrobat JS you'll probably need to hire an expert.

  • COPA Data Source: possible to enhance using exit?

    Hi BI experts,
    I got a question about if it is possible to enhance COPA data source by using user exit (just like the way to enahance other data sources in the business content).
    The background:
    I have to include several new fields in COPA data source. Since COPA data source is generated (not a data source from business content like LIS data sources).
    My questions:
    1) Is it the recommended way to enhance the existing COPA data source using exit?
    2) or it would be better to delete the existing one and create a new one with the two additional fields?
    3) any potential issue to be expected?
    Your feedback and help is highly appreciated.
    Regards,
    Sally

    Hi
    1) Is it the recommended way to enhance the existing COPA data source using exit?
    Yes, we can enhance COPA DS via User Exit, Provided the fields should be from other different tables which are not from Segment Tables.
    2) or it would be better to delete the existing one and create a new one with the two additional fields?
    If the fields are from Segment Tables, it is always better to delete the existing one and Recreate the same
    3) any potential issue to be expected?
    Appending/Enhancing fields are always bit difficult and my lead into errors in future, based on the critical functionality we use.. But I recommend DELETE THE DS AND RECREATE WITH COPA always.Hope it helps

  • Is it possible to enhance T400 with fingerprint reader?

    I bought T400 WITHOUT fingerprint reader. Is it possible to add fingerprint reader? How expensive this enhancement? I am fine to send laptop back if this can be done at service center.
    Thanks in advance for your help.

    Here is a quick tip on How to create a PDF file from Adobe Reader.

  • Is it possible to enhance DropDownByIndex?

    Hi All,
    I don't know whether there's standard controller like DropDownByIndex but editable.
    Purpose is that DropDownByIndex may contains a very long list values and difficult to find. Hence I want to make the DropDownByIndex editable and react to Enter event which will filter the list with the text.
    Any suggestion on this?
    Thanks and regards,
    Felix

    It is not possible to change the standard UI elements. Generally if your list in the dropDown is that long and you want some filter criteria, then you should probably be using a search help on an inputField instead of a DropDown.  In 7.02 we also have the option of using SuggestValues property. This builds a dropDown out of the inputField as you type with the matching results from a DDic Search Help.

  • Is it possible to enhance Referential infotypes like 0106, 0213, 0318 etc

    Hi All,
    Currently I have a requirement to enhance Infotype 0106 so that the new fields should come in PA20 when maintaining/displaying Infotype 0021 ( As 0106 is a referential infotype for 0021 ). I created using PM01 and the fields/screens are created. But when I noticed in the module pool of 0106 (MP010600), there is no call to ZP010600 screen. Normally in all the Module Pool Programs, this set of code will be present in the PBO logic
      CALL SUBSCREEN subscreen_t582c INCLUDING subscr_prog subscr_dynnr.
    But this is not in MP010600. When I noticed, Infotype 0106 itself is a subscreen.So it cannot call another screen. All my configurations ( T582c, T588M ) are in place. But still the new fields that I had added in CI_0106 is not available in PA20 of IT0021. Please help.
    Thanks

    Hi All,
    Currently I have a requirement to enhance Infotype 0106 so that the new fields should come in PA20 when maintaining/displaying Infotype 0021 ( As 0106 is a referential infotype for 0021 ). I created using PM01 and the fields/screens are created. But when I noticed in the module pool of 0106 (MP010600), there is no call to ZP010600 screen. Normally in all the Module Pool Programs, this set of code will be present in the PBO logic
      CALL SUBSCREEN subscreen_t582c INCLUDING subscr_prog subscr_dynnr.
    But this is not in MP010600. When I noticed, Infotype 0106 itself is a subscreen.So it cannot call another screen. All my configurations ( T582c, T588M ) are in place. But still the new fields that I had added in CI_0106 is not available in PA20 of IT0021. Please help.
    Thanks

  • Hi folks, is it possible to enhance the performance of my iPhone 4 (running on iOs 7.0.4)? My iPhone has really become slow, applications like Facebook, WhatsApp, Viber etc take ages to load!

    Any help is appreciated!

    If you go to this page, Apple specifically states that performance enhancements for iPhone 4's are included in this update (scroll down to the bottom of the page).
    Some folks may have found that their iPhones don't seem to work as well with iOS 7, but that generally means there were other issues that were present prior to the update & they are only just now coming to light.
    If you still have issues after upgrading to iOS 7.1, the next thing to try would be to backup your phone & restore it as a new device, just to see if the issues clear up.
    If yes, something on your phone is corrupt; if no, you may have a hardware issue that requires the phone to be replaced.
    ~Lyssa

  • Possible to enhance Book Publishing Template?

    Dear all,
    Is there a way to customize/enhance the Book Publishing Template?
    I create my template and select my entity as variable dimension and all my PDF files and the folders generated are with the technical name of the Entity. We would like to generate the PDF with the name of the report.
    Also is there a way to control the destination it generates the PDF to? I get to choose a local folder only if I select a Single PDF option.
    Any help will be highly appreciated.
    Thanks!

    Kumar,
    Great questions.  I do not have the answers, but I have posted these ideas to hopefully improve this solution:
    Publish PDF books to a specified path? : View Idea
    Ability to name the book published report when not a single PDF : View Idea
    Let me know if you learn anything new...
    Jeff

  • How to enhance table control in DMS. Need to display doknr more than 25 cha

    Hi there.
    In transaction IL03 - document tab - I need to display a doknr which is longer than 25 characters.
    I search for exit/enhancement for DMS - saplcv140/control SUB_DOC, but cant find anything.
    If it is not possible to enhance this field, i would like to add a new field (more than 25 char) and fill in the long doknr.
    The documents that are attached contains both an internal docnumber(from the external system) and an external docnumber (functional location type of number). It is very important to show external documentno in the table control.
    Actually in the table DRAW the external dok number is in the field MRK_FILEP. Can this field somehow get in the tablecontrol?
    Anybody has experience with docno longer than 25 characters? Or how to enhance tablecontrol sub_doc (screen 0204) in fuction group CV140.
    Br,
    Liselotte.

    The BAdI CRM_BADI_RF_Q1O_SEARCH is for enhancing OneOrder based searches. Not for business partners.
    The BAdI CRM_BUPA_IL_SEARCH is the way to go. I just checked in our system.
    In the method SEARCH_CRITERIA_INITIAL check if your field is supplied in IS_PARAMETERS. If yes return CV_IS_NOT_INITIAL = 'X'.
    Then in SEARCH_PARTNERS you delete the entries from table CT_PARTNER_KEYS according to your parameter.
    However this is not very performant. If you have a search with criteria only of your own for the BAdI SAP coding will first select everything and then you filter out.
    Anyway, it is much faster to implement than a new search...
    cheers Carsten
    Edited by: Carsten Kasper on Nov 18, 2008 7:44 PM

  • Enhanced status of Purchase Order

    Hi Experts,
    Is it possible to enhance the status of purchase order in ECC? The client requested to custermize the status and the sequence which is I'm not sure. Please advise if you have any ideas.
    Rgs, Michelle

    Hi,
    Thanks to your reply, and would you please elaborate. Do you mean that we need to enhance by using ABAP or can configure in the backend by copying the document type from standard one?
    Rgs, Michelle

  • Enhancement for BASIC_PURCHASE_PRICE_READ

    Hi All,
      I want to make some changes for FM BASIC_PURCHASE_PRICE_READ.
    This is only possible through enhancement like userexits and BADI's
    Does anyone knows what is enhancement for BASIC_PURCHASE_PRICE_READ.
    Thanks in Advance,
    Nitin P

    in info record you can only have one price at a time. there is nothing in the info record that can make prices dependend on customers.
    split valuation  cannot do anything for you in this case.
    you may just enter a basic price in the info record. and then add a surcharge or deduction in the PO.
    for this surcharge/deduction you can maintain  conditions with MEK1. you may need to customize a new access sequence that contains the customer (I have never tried it)
    The question is: how does the PO know that it is for a certain customer? is it a third-party PO? is it with a account assignment to a sales order?

Maybe you are looking for