Is it possible to enter a translation in SE63 for a non-installed SAP lang?

We are attempting to create translations in Swedish but receive an "Incorrect code page" message when attempting to enter text into SE63 (Long-text). We don't have Swedish installed as a language within our old CRM 4.0 system and expect this is the reason why. Is there any way around this problem does any one know, short of installing the language within SAP. I think we encountered code-page issues, but can't be sure of that as it was so long ago.
Gary King

Dear Gary,
As the note 837669 outlines, it is necessary that the target languag
to be installed in the system.
Are you using Unicode system or MDMP or single codepage?
In any cases, swedish language belongs to the same codepage as DE an
EN, which is codepage 1100, it should be quite easy to install
swedish into your system.
You can do so via report RSCPINST. And also changing the parameter
zcsa/installed_languages.
Please review note 42305 for more details.
You don't need to import language packs if you don't need use
swedish in the system other than translation.
Regards, Gerhard

Similar Messages

  • Is it possible to enter a custom canvas size for videos shot in portrait

    I'm working on a project for a client that needs to string together several hundred videos that were all shot on an iPhone in portrait. I have found where I can change the "Video Properties" by clicking the wrench icon in the properties inspector, but I cannot figure out a way to enter a custom size. Vimeo supports vertical video, so I would like to keep the vertical format and edit the videos together using FCPX. Is there a way to do this?

    Thanks Tom. I was able to crop the videos by purchasing Quicktime Pro 7 and using a mask. I did not realize that Quicktime Pro 7 would work on Lion, but it seems to be working fine.
    Thanks!

  • Translate a smartform to a non installed language

    Hello to everybody,
    I need to translate a smartform from english language to italian language and the se63 transaction gives back to me "Incorrect Code Page" error. My question is if i may translate this smartform omitting the package language installation.
    Thanks in advance.
    Pedro.

    This confirmation was what needed.
    Some people that tell me that this translation had been possible.
    Thanks to everybody,

  • A possible fix for the non-installing applications on the iPod touch

    Here's what martinlondon posted in another thread...it worked for me! Turn ON the auto sync in your music tab, and the applications seem to load! You might lose your manually managed music on the iPod, but I didn't as it wouldn't sync up my music as there was too much in my library to FIT on my 8 GB iPod touch...
    Here's what he posted:
    A hint for anyone with this problem: I found a comment on a thread at theregister.co.uk suggesting that the problem was that you need to have automatic sync turned on to enable the new applications; manually managing your music doesn't work. I'm guessing a lot of people manually manage as their music collection is bigger than their Touch, including me...
    If you switch it on and sync, the new apps install like a charm. The downside is you lose all of your painstakingly manually copied music/movies on the iPod, so you have to switch back to manual syncing and copy them all across again. But this is a way to get it installed.
    I happened to be on the phone to the support team earlier today (Touch support is handled through the same team as desktop support apparently, and I had a Leopard upgrade issue) and they didn't know the cause or solution.
    Have to say that Apple's QA department don't seem to have covered themselves with glory here...

    manual syncing was never checked for me, so 'autosyncing' didn't fix the problem. I wish it did.

  • Is it possible to enter GR in GR Blocked stock without reference to PO

    Hi Experts,
    Is it possible to enter GR in GR Blocked Stock without reference to PO?
    Regards
    Manas

    HI All,
    I need the GR in GR Blocked stock and not in Blocked Stock.
    Scenario is : Material came to the gate without PO reference. Client told to enter the material into GR blocked stock. Po will be raised soon.
    Please help,
    Manas

  • Is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes

    is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes ?
    it would be very important to put the data from iphone 5 to my new 5s ..
    looking forward to get some help
    thx

    You cant unlock your phone unless you put in your password. It may be possible that the apple store could do something about it.

  • Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

    Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?  I don't need the calendar grid.  I just want a list of events on a particular calendar, and their dates.  Is that possible? 

    Not easily. Two possibilities:
    1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
    2) You could write an Applescript to locate the events and write them into a text file for printing.
    The first one will probably give you what you want.

  • Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?

    Hello!
    Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?
    I still want the serial number in the Report.
    I also want the serial number as file name of the report.

    You can enter the serial number in the main sequence instead ot the "Pre UUT" but there is no reason to do that.
    if you still like to input serial number in your sequence You will need to make sure that you update the variable in the process model which stores the serial number ie. RunState.Caller.Locals.UUT.SerialNumber
    This is used to generate the report.
    the report can also contain the serial number of the uut if you select "New file for Each UUT" under Configure-Report options and in the "Report File name path"
    The format of the name of the report will be
    [123].txt
    "123" was the serial number which I entered.
    If you are not happy about the name of the file you can replace Locals.ReportFilePath to contain the right name using a statement step in the process mode
    l. If you using the default process model please make sure that you add the statement step after "Determine Report File Path" step in the Process Model.

  • Is it possible to enter multiple records in Infotype.

    Hi,
        I am having doubt regarding entering multiple values in infotypes for HR-ABAP.
    Is there any way to enter multiple records in a infotype, As compared to ABAP, By using table maintence generator we can enter mutiple records in the form of table. In the same way, do we have any way to do multiple entry in HR-ABAP.
    Please Explain.......
    Thanks & Regards,
    Kumar Madduru

    Hi pavan,
        I am also having the same doubt regarding multiple entries in an infotype,
    Actually my requirement was to make multiple entries into one infotype,
    let us take an example as to feed employee project detailes..
    i.e.. -
          ! Start date     !  End date      ! Client          !  Role in Project !
          ! 10-02-2004    ! 27-11-2004    ! Nestle        ! Team member   !
          ! 28-11-2004    ! 05-06-2005    ! HP             ! Team member   !
          ! 06-05-2005    ! 18-03-2006    ! Relience     ! Team member   ! 
          ! 19-03-2006    ! 04-11-2007    ! lenovo        ! Team Lead        !  
          ! 05-11-2007    ! 31-12-9999    ! Bajaj          ! Team Lead        !    (current project)
      Now, My intension is to enter these data without always clicking create icon,
    do we have any possiblity to do this. As we can insert multiple entries using T.code SM30.
    i.e to insert or delete multiple data into transp table.
      Please reply as soon as possible.
    Thanks in advance.
    Surender.

  • Is it possible to enter the password via itunes to retrieve information from my iphone if the lcd has gone bad

    Hi,
    Is it possible to enter the password to your iphone via itunes if the lcd on your screen is preventing you from doing so? i would like to be able to sync my calendar and notes from iphone to my computer but my phone is locked.

    No. If you had previously synced the iphone to your computer you would not have to enter a passcode on the phone, as the devices would have established a trust relationship. Absent that there is no way to unlock the phone.

  • Is it possible to enter a 5 weekly event on an iphone 4s ? If so how?

    Is it possible to enter a 5 weekly event on an Iphone 4s? If so how?

    BLF call presence is not yet working and I haven't identified the buddy watch or the lines in the config file that address this
    You have feature.1.name="presence" feature.1.enabled="1" included in your <PHONE_CONFIG></PHONE_CONFIG> It is "generic enable" for so called "buddy watch" feature. But then, you need to configure who's your buddy.
    It is part of phone's directory, e.g. [MAC address]-directory.xml file, but you have no such file. I assume your directory (so buddy list as well) is empty. The file in question looks like
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <directory>
    <item_list>
    <item>
    <ct>110</ct>
    <lb>Toby Flenderson</lb>
    <bw>1</bw>
    <sd>1</sd>
    </item>
    <item>
    <ct>106</ct>
    <lb>Edna Abbot</lb>
    <bw>1</bw>
    <sd>2</sd>
    </item>
    </directory>
    The bw is acronym for "buddy watch". Phone directory records with bw=1 are your buddies. It's status is monitored by Polycom phone then.

  • Is there any possibility to enter assets manually

    Hi Friends,
    There shall be provision to enter assets manually in sap.
    As per my knowledger there is possibility to enter assets through f-90. is there any other way to enter assets manually.
    Thanks
    Ramakrishna

    hI GANTI,
    tq U LOT. I GOT CLARIFIED.
    REGARDS,
    RAMAKRISHNA

  • "Enter the Yahoo! password for [my yahoo email address]" keeps popping up on my Mac desktop

    A pop-up window "Enter the Yahoo! password for [my yahoo email address]" keeps popping up on my Mac desktop (Leopard OS) every few hours. This has happened for the past year and only happens on my MacPro desktop, never on other laptops/computer. Does anyone have solution please ?

    Ok !! I think I finally found the trouble of this !! I went crazy that every 5 seconds I had to fill in my password for my yahoo account om Apple Mail. My computer is in another language so I'll try to translate as good as possible the buttons and so ..
    So these are the steps required:
    You need to give computer access to the password of Yahoo.com. How to do so ?
    You go to the application "Key Chain" that is included in your MacBook Pro.
    Then you go to the first tab that should say something with "Login/Session" and you should see all your saved passwords.
    Scroll down to the saved password of  "Yahoo: your-username @ ...
    Click on it, you should see a window opening
    Go to the tab "Access Control"
    Then click on "Allow all applications to connect .. ", NOT the option "Ask every time for allowance" or you can also just add the program "MAIL" with the "+" icon !!
    There you go, now you should not have to worry again !!!!!!
    Hope it helps people !!!

  • Enter your name and password for the server when trying to connect PC and Mac?

    I'm trying to connect my iMac and my WIndows tablet (got it for free) together through my home network.  I open iPhoto, then "Import to Library" ; the connection fails and when I click on "Connect as" up pops this box asking me to "enter your name and password for the server -computer name here-". HELP!!  Where do I find the password?  I've tried everything possible and no go.
    I am running Windows 8 and Lion.

    Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.

  • Is there a key for entering text on ipad mini for the schwa symbol?

    Is there a key for entering text on ipad mini for the schwa symbol?

    You're welcome.
    It is possible there is an app containing a phonetic keyboard in the app store (or not). I haven't had use for one, so have never checked. Using it would require some copy and past on your part. But it might worth a search.
    Oh, just to be clear (should have googled and not trusted my aging memory) you're basically looking for an upside-down "e", right?

Maybe you are looking for

  • Can Aperture do this (what iPhoto can't)?

    When I connect my camera, iPhoto shows me all photos and all videos on the sd-card. Then I must select the pics, because I want to import videos with another program. How can I avoid this process? Can I make Aperture show me only photos, and no video

  • Itunes keeps saying it is a locked disk or you do not have the write permission. What is happening?

    iTunes keep telling me that i havea locked disk or you do not have write permission. How can i fix this? I have deleted and reinstalled it.  It will let me open it on another user but will not let me sync. Says Ido not have enough authority..

  • Three Nikon Cameras have created duplicate names of files -How do I rename?

    I have loaded hundreds of photos with duplicate names from 3 cameras that use the same naming sequence. How can I at least rename one of the duplicate file names so that I don't have duplicates??????? I appreciate your help. -Paul

  • Help With Api

    Hi, I have a school project to do about a digitial circuit simulator. i am done most of the parts but i am having a problem with the junit.FrameWork.assert library. The following code gives me an error near assertFalse. public void testSimpleLine() {

  • MacBook Pro using WinXp and Built in iSight camera?

    Can't seem to find a thread on this question? Is it possible to use the built in iSight camera on a MacBook Pro while running Win Xp Home SP 2? Thanks Dennis Moore